Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER TO AWARDED THE WORK | |
| 2 | L2₹56.4 L+₹32,110.01 (0.57%)Rejected-Finance | L2 | Rejected-Finance L2 BIDDER | |
| 3 | Rejected-Technical SHIMLA MUNICIPAL CORPORATION | SHIMLA | HIMACHAL PRADESH | 171001 | - | Rejected-Technical Not Qualified |
Tender Value
₹53.4 L
EMD Value
₹1.1 L
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPPWD DIVISION KOTKHAI
C/o Bailey Bridge on Sholvi Dalsar Hatli road in Tehsil Kotkhai, Distt. Shimla, H.P. , C/o, Both side abutments, wing walls and M/T on approaches at R.D. 0/240
2023_PWD_78434_1
pw-kd-e-tender/2023-24-2667-71 dtd 29-8-2023
Open Tender
Civil Works - Roads
Item Rate
45 days
Kotkhai
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,000
₹1.1 L
29 Sept 2023
5 Sept 2023
12 Sept 2023
5 Sept 2023
11 Sept 2023
5 Sept 2023
Amount
Excavation in Hill area by manual/mechanical means:- Excavation in soil in hill areas all heights and depth in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hardd rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out rock( where blasting is prohibited) including cutting and trimming of side slopes and disposing of excavated earth with a lift upto all heights and all leads as directed by the Engineer-in-Charge, in conformately with the requirement of technical specification of rural roads clause 1603.1 all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.
Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads , dressing of sides and bottom and back filling in trenches with excavated suitable material in ordinary soil upto all depth. as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.
Providing and laying in position cement concrete of specified grade including the cost of form work in R/walls 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade including the cost of form work in R/walls 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Providing and laying concrete for superstructure complete as per drawing and technical specification clauses 802,803,1202 and 1203 RCC M 25 1:1.5:3 (1 cement : 1.5 Sand : 3 Graded Stone Nominal mix upto 5m height) excluding form work including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Backfilling behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1204.3.8 with granular material including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Providing weep holes in brick/ stone / plain reinforced concrete abutment, wing wall, return walls with 100 mm dia PVC pipe extending through the full width of the structure with slope of 1V : 20H towards drawing face complete as per drawing and technical specifications clauses 614, 709 and 1204.3.7 including carriage of material within all leads and lifts and other incidentals. including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Construction of granular sub-base grading-I by providing well graded material 53mm to 9.5mm @ 50%, 9.5mm to 2.36mm @20% and 2.36mm and below @ 30% mixing in a mechanical mix plant at optimum moisture content, carriage of mixed material to work site upto lead of required distence spreading in uniform layers with motor grader on prepared surface, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 including hauling of material in all leads and lifts, as per the entire satisfaction and direction of the Engineer-in-Charge.
Providing, laying , speading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thockness, hand packing, roling with smooth wheel roller 80-100KN in stages to proper grade and camber applying and brooming stonescreening/binding materials to fill-up the interstices of course aggregate watering and compacting to the required density Grading - 2 as per technical specification clause 405. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
Providing, laying , speading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thockness, hand packing, roling with smooth wheel roller 80-100KN in stages to proper grade and camber applying and brooming stonescreening/binding materials to fill-up the interstices of course aggregate watering and compacting to the required density Grading - 3 as per technical specification clause 405. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70-1.0 Kg/sqm using mechanical means as per technical specification clause 502. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per technical specification clause 503. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness by mechanical means composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 complete in all respect including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Providing and laying boulder apron laid in wire crates mate with G.I.wire confirming to IS :280 & IS 4826 in 100mmx100mm mesh (weaved diagonally including 10% extra for laps and joints laid with stone boulder weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 including hauling of materials through all modes of transportation within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.
Laiq Ram Chauhan and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .