SITC of 05 Cusec submersible pumping unit along with chain pulley block and allied works at IPS Boulevard and 100 KVA D.G. set and other allied works at Dewatering Station Baghwanpora and Pumping unit at Daulatabad

(A) IPS Boulevard: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable (Power cable, control cable, instrumentation cable each 100-meter length), ultrasonic level transmitter, soft starter panels, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity=583.33 M3/Hr Head=12 meters or above Motor rating = 50-60 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent)

Supply, installation, fitting, testing and commissioning of under running, outdoor type monorail electric hoist of 3 TON capacity and lift of 8 M capable of travelling across (Right & left) and lifting and lowering (Up & Down) movement. The technical speciation of the EOT is as under Duty Or Class of hoist: Electric hoist, under running, outdoor type with continuous operation. Capacity=3-ton Lift of Hoist=8M Specification IS3177 (1999):IS800(1976) Motor: Electric hoist, under running, outdoor type with continuous operation Hoist Speed: - 4 m/min (Max.) Control/operation of electrical hoist Pendent station control to be operated from MFL (approx. 12 Feet vertical height) complete with control panel Wire Rope manufacturing and testing: -As per ASTM A 1023M-02 and ASTM A586 Number of Falls: 4 or higher Wire rope diameter: As per IS code Tensile strength: 1770 N/mm² (minimum) Rope Drum: un-flanged Material: seamless pipe Drum dia : As per IS code Drum Length: As per requirement Type of bearing: -SA spherical roller/ball bearing Hooks: Type Plane ‘C’ Shank Swiveling: Yes, On Thrust Bearing Safety latches: To be Provided Designed: According to DIN-15400 Type of Brakes: Electro hydraulic thrust or electromagnetic disc type Limit Switch: Rotary The hoist system shall be complete in every respect and shall be tested on load at site. The job includes Providing /erection of structural supports, cross members etc for erection of EOT crane. Make(Induff/Pull lift/equivalent) Note: -The equipment shall be provided with company test certificate

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The mats shall be as per IS 15652:2006 & shall have the following specifications: - Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 4mm Size: - 1M wide. The rubber mats shall be accepted with manufacturers test certificate.

(B) IPS Daulatabad: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable ( Power cable, control cable, instrumentation cable each 100 meter length) ,ultrasonic level transmitter(0-10 Mtr),soft starter panel, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 210 M3/Hr Head = 12 meters or above Motor rating = 20 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent)

Providing fitting and testing of MS pipe 150 mm dia 6.4 mm thickness. The job includes P/F of MS bends, fab for the delivery manifold up to rising main including easy bends, flanges, rubber gaskets nut and bolts etc for successful execution of work at site

Providing fitting and testing of 150 mm dia sluice valves

Providing fitting and testing of 150 mm dia Non return valves

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The mats shall be as per IS 15652:2006 & shall have the following specifications: - Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 4mm Size: - 1M wide. The rubber mats shall be accepted with manufacturers test certificate.

(C) IPS Baghwanpora: Providing, installation, testing & commissioning of diesel generating set suitable for operation at site with rated output of 100 KVA. The DG set shall be compliant with latest CPCB norms and shall comprise of a silent, eco-friendly diesel engine and an alternator close coupled and mounted on a common base frame along with standard accessories within acoustic enclosure & rated for continuous duty with overload provision of 10% for running electrical induction motor with different capacities coupled to sewage / drainage pump as well as illumination system. The DG set shall be provided with 150 Sq mm 3.5 core Al cabling from D.G set to main MCC panel, earthling as per OEM recommendations. The job includes P/L of RCC foundation block as per OEM recommendations along with CGI roofing. Make (Cummins/Caterpillar/Kirloskar/equivalent)

Fabrication providing erection of MS trash guard inside the slit chamber to be fabricated out of MS square bars with Angle iron frame. The spacing between the bars shall not be more than 25 mm. The details of the angle iron and square bars are as under. Angle iron ISA 75mmx75 mmx6mm= 30 Mtr @6.8Kg/Mtr=204 Kg. 12 mm thick square bars=450 [email protected] Kg/M=508 Kg. Total=712 Kg