Construction of Hazardous Storage Facility at Armour Unit, Rohtak for MIDHANI, Rohtak

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for lift upto 1.5m, as directed by Engineer-incharge.

Supply and laying of clean, well-graded Tibba sand for earthwork in filling including spreading, leveling, watering, and mechanical compaction in horizontal layers not exceeding 200 mm loose thickness to achieve a minimum of 85% of Modified proctor Maximum Dry Density (MDD) all depth and locations as per direction of Engineer -in- Charge.

Providing and laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering, complete as directed by Engineer-in-charge.

Supplying, fitting and placing Fe-500 bar-TMT reinforcement (Min 415N/mm2) reinforcement in RCC works complete as per drawings and technical specifications for bars including over laps and wastage, where they are not welded including cost and conveyance of steel, binding wire etc., lifting charges of steel, placing in position, tying with binding wire, all tools etc., and overheads & contractors profit complete for finished item of works.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, Beams, Plinth beams, girders ete.

Providing & laying RCC M25 Design Mix of specified grade exclude the cost of centering & shuttering all work at all levels as indicated in drawing including cost of mixing, placing, compaction, vibration, pumping, consolidation, curing complete, foundation, walls etc., with 20mm & down size metal at all levels as per drawing. (330 kgs of minimum cement content)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)