Construction of Staff Quarters

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator) over areas (exceeding 30 cm and upto 1.50 mtr in depth, 1.50 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth lead upto 50 m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed. All kinds of soils

Earth work in excavation by manual means over areas ((exceeding 30 cm and upto 1.50 mtr in depth, 1.50 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed. All kinds of soils.

Filling available excavated earth (excluding rock) in trenches, plinth slides of foundations etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 .

Supplying and filling in plinth with fine sand under floors including watering, ramming, consolidating and dressing complete

Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:4:8(1 cement4 coarse sand: 8 graded stone aggregate 40 mm nominal size) crushed. Foundations;

Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 40 mm nominal size) crushed. Foundations;

Providing and Laying damp proof course 40 mm thick with cement conc. 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 12.5 mm nominal size) crushed.

Extra for providing and mixing water proofing material in cement conc. Work in doses by weight of cement as per manufacturer’s specifications

Making plinth protection 50 mm thick of cement conc. conc. 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand incl. Finishing the top smooth.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to floor five level excluding cost of centring, shuttering , finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window skills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc and removal of forms for Foundations, footings, bases of columns etc. For mass concrete.

Centring and shuttering including strutting, propping etc and removal of forms for Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc and removal of form for Lintels, Beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc and removal of form for Edges of slabs and breaks in floors under 20 cm wide.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars.

Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand).

Extra for brick work in superstructure above plinth level upto floor V level.

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 (1 cement: 4 coarse sand).

Extra for brick masonry in superstructure above plinth level upto floor 5th level.

Providing and fixing gang saw cut mirror polished(pre moulded and pre polished), machine cut for kitchen platform, of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing , moulding and polishing to edge to give high gloss finish etc. complete at all levels Green Marble: 18 mm

Extra for providing edge moulding to 19mm thick marble stone counters, vanities etc over item No 8.2 including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in Charge Marble work.

Providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia. and length (hold fast lugs or dash fasteners shall be paid for separately) Second class Deodar Wood:

Providing and fixing panelled or panelled and glazed shutters for door, windows and clerestory windows including ISI marked black enamelled M.S Butt hinges with necessary screws including, panelling which will be paid for separately. Second class Deodar Wood: 35 mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves) or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/ sqm. (4mm thick) glass panes including black enamelled ISI marked M.S butt hinges with necessary screws; 35 mm.

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia. 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enamelled MS butt hinges with necessary screws.

Providing glass panes with wooden fillets wherever necessary; glass panes weighing 10kg/sqm.

Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x5cm 1:3:6 mix (1 cement: 3 coarse and: 6 graded stone aggregate 20mm nominal size).

Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc are required. In gratings, frames, guard bar, ladders, railings, brackets, grates and similar works.

Providing and fixing hand rail be welding etc to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S tube 40mm nominal bore

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 40 mm thick with 12.5 mm nominal size stone aggregates -crushed.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colour, shades except begundy, bottle green,black of any size as approved by Engineer incharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry # 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming of Is: 13755 of NITCO, ORIENT, SOMANY, KAJARIA Or equivalent make in colour such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete.

Structural Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc are required. Roof trusses:

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.63 mm thick with zinc coating not less than 275 gm/sq

Providing ridges or hips of 60 cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing 15 cm wide 45 cm overall semi circular G.S sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes. 0.80 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing on wall face unplasticised –Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes 75mm diameter

Providing and fixing on wall face unplasticised –Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes 110mm diameter

Coupler 75 mm forProviding and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. a)

Coupler 110 mm for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

Single tee with door 75x75x75mm for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

Single tee with door 110x110x110mm for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. d)

Bend 87.5* for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

Shoe (Plain) 75mm for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

G Shoe (Plain) 100mm for Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised PVC Pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc complete. (75mm)

Providing and fixing unplasticised PVC Pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc complete. (110 mm)

12mm cement plaster of mix 1:6(1 cement:6 fine sand)

15mm cement plaster of mix 1:6(1 cement:6 fine sand)

6mm cement plaster to ceiling of mix 1:3(1cmeent: 3 fine sand)

Finishing walls with water proofing cement paint of required shade New work (two or more coats applied @ 3.84 kg/10 sqm)

Distempering with first quality acrylic washable (ready made) of approved manufacture and of required shade/colour complete as per manufacturer’s specifications-two or more coats on new work

Providing wood work in frames of false ceiling, partitions, etc. Sawn and fixed in position; Second class deodar wood

Providing and fixing panelling: Plywood 5 ply, 9 mm thick Decorative Ply wood one side decorative veneer and commercial veneer on other face (type-I) conforming to I.S: 1328BWR type.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing water closet squatting pan (Indian type wC Pan) with 100mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware/Hindware /Seabird/Orient (Coral)/ Hindustan/Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vitreous China Orissa Pattern WC pan of size 580x440mm with internal type foot rests.

Providing and fixing wash basin with CI/MS brackets 15mm C P Brass pillar taps, 32mm CP Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. Wash basin size 630x450mmwith a single 15mm CP Brass pillars taps

Providing and fixing Salem Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI Brackets, and Stainless Steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 600x460mm bowl depth 200 mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 32mm dia flexible pipe Providing and fixing 100mm Stainless Steel grating for gully, floor or Nahani trap

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing PVC terminal guard(75mm)

Providing and fixing PVC terminal guard(100 mm)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: (100mm inlet and 100mm outlet)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: (100mm inlet and 175mm outlet)

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour weighing not less than 88 gm

Providing and fixing GI Pipes complete with GI fittings and clamps, including cutting and making good the walls.(15 mm dia. nominal bore)

Providing and fixing GI Pipes complete with GI fittings and clamps, including cutting and making good the walls.(20 mm dia. nominal bore)

Providing and fixing ball valve (brass) of approved quality complete 20mm nominal bore

Providing and fixing un-plasticised PVC connection pipe with brass unions 15mm bore, 45 cm long

Providing and fixing CP brass shower rose with 15 mm inlet 150 mm dia.

Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore

Providing and fixing CP Stop cock (concealed) of standard design and of approved make conforming to IS: 8931 a)15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 a)15mm nominal bore

Providing and fixing C.P brass soap dish

Providing and placing on terrace polyethylene water storage tank ISI:12701 marked indicating the BIS Licence No. With cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank.

Providing, laying and jointing Glazed Stoneware Pipes grade A with stiff mixture of cement mortar in proportion of 1:1 (1 cement: 1 fine sand) incl. testing of joints etc. Complete. and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes- 150 mm dia.

Providing and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of WC kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound impermo of Snowcem or equivalent conforming to IS: 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3(1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area (iv) IVth course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm

Making Soak Pit 2.50 m dia. 3.00 m deep with 45x45 cm dry honeycomb shaft with bricks of class designation 75 and SW drain pipe 100 mm dia. 1.80 m long complete as per standard design. With FPS bricks with

Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) ) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3(1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement and making channels in cement conc. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 80x90 cm and 45 cm deep incl. C.I cover with frame (Light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of and weight of frame 15 kg) With FPS bricks with class designation 75 and with Crushed stone aggregate.

Providing and fixing cupboard shutters 25 mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked exterior grade (Grade I Type II) having one side decorative and other side a balancing lamination including second class teak wood lipping of 25 mm width 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per the directions of the Engineer-in-charge.

Providing and installing water lift pump 1HP incl. all accessories at Market rate.

Providing and fixing light/fan points with modular switches ,sockets and wiring as per standard requirements complete, including cost of lighting lamps but excluding cost of fans as approved by Engineer-in-charge.

Providing and fixing 1200 mm dia. ceiling fans of approved make, with all accessories complete, as per the directions of the Engineer-in-charge.

Providing and fixing power points with modular switches, sockets and wiring as per standard requirements complete, as approved by Engineer-in-charge.

6mm cement plaster to ceiling of mix 1:3(1cmeent: 3 fine sand)

M/S UDHAM SINGH

M/s TEERTH SINGH