CRC-WGTRD-127- M. B. Road

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm: removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 .By Manual Means. In area of non thorny Jungle

Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.)

Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300. I and 300.2 for subgrade construction as per Technical Specification Clause.303.5.2.

Granular Sub-base with Well Graded Material (Table 400.1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with srnooth wheel roller achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 3:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in ) stages to proper grade and carntM, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause1504 complete including carriage.

Plain/Reinforced cement concrete, in well foundation complete as per drawing and technical specification including steel shuttering formwork

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 7mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cmx45cmx60cm below level as per approved drawing and sign.(All the steel work must be Tata /Sail/or any other approved brand . (ii) 60 Cm euilaterial Triangle

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 7mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cmx45cmx60cm below level as per approved drawing and sign.(All the steel work must be Tata /Sail/or any other approved brand . (ii) 80cm x 60cm Equilateral Triangle

Providing reflective pavement marker with a provision of spike at the bottom With Micro prjsmatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance

Construction of RCC Guard Wall: Excavation for Structures (Earth work in excavatlon for structure as per drawlng and technical specificatlon, clause 305.1 Includ/ng settlng out, construction of shoring and bracing, removal ofstumps and other deleterious materlals and d/sposal upto a lead of 50.00m, dressing of sides and bottom and backfilling In trenches Vlth excavated suitable mcterla/, Ordlnary soll , upto 3.00m depth.

Removal of Unsuitable Soll with Disposal upto 1000 metres (Removal of unsultable soil including excavation, loading and disposal upto 1000 metres lead but excluding compection upporting embankment subgrade sreplacement by suitable soll which shall be paid separately as per clause 303.5.2 as per technical specification clause 302

Providing and laying of dry rubble Flooring, complete as per drawing and technical speclfiætlon , clause 1308.3 works.

Providing concrete for plain/reinforced concrete In open foundations complete as per drawings and technical specificatlons Clause 802, 803 , 1202 and 1203. , A) with crushed stone (II) PCC Gr. M10 , with crushed stone,Nominal Mix 1:3:6

Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and technical specificaions

Plain/ReInforced cement concrete, In sub structure complete as per drawlng and 6 techn/co/spec/flcat/on andstee/shutter/ngformwork. (N) without plastlciser, (B) RCC Grade M20, height upto 5.00m ( Screed concrete On top of Boulder masonary Guard wall)

Providing weep holes in Brick masonry/Plain/ReInforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of IV :20H towards drawing force. Complete as per drawing and Technical speclficatlon.

Backfillng behind abutment, wing wall and retum won complete as per Drawlng and technical specification. B. Sandy materlals

Providing and fixing in posiion pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawng and technical specifications Clause 1208.2

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 Itr/ 10 sqm over an under coat of primer applied @ O. 80 Itr/ 10 sqm of approved brand and manufacture

Finishing walls with Acrylic Smooth exterior paint of required shade 13.111.1 Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface)

Construction of 600 mm dia HPC for cross drainage water from bye lane to Mora Bharalu River: 'Earth work in for structures per drawing and technical clause 3W I including out of shoring and bractng removal of stumps and other deleterious materials and isposal of dressing of sides and tmom and back filling trench with excavatd suitable materials-I (i) Ordinary soil upto 3m

Providing concrete for Plain/ Reinforced concrete in open M10 (1:3:6) nominal mix in levelling course below open in head walls as per drawing & technical specifications 1109

Providing and Laying Reinforced Cement Concrete pipe NP3 for culverts on first classs bodding of granular material in single row including fixing coller with cement motar 1:2 but excluding excavation, protection works, bachfilling, concrete and masonary work in head walls and perapet clause 1106 (ii)600mm dia

Brick Masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202& 1203. ii) Brick masonry in 1:4 cement morter

Plastering with cement mortar (1:3) 15 mm thick on brickwork in substructure as per Technical specification Clause 613.3

Repairing of existing Cross Culvert.: Dismantling of existing stuctures like culverts, bridges, retaining walls and other stucture comprising ot masonry, cement concrete, wood work, steel work, including and scaffolding wherever necessary, the mateial,disposal of unserviceable material and stacking the material with ail lift and lead of 1000 metres)

Removal of Unsuitable Soll with Disposal upto 1000 metres (Removal of unsultable soil including excavation, loading and disposal upto 1000 metres lead but excluding compection upporting embankment subgrade sreplacement by suitable soll which shall be paid separately as per clause 303.5.2 as per technical specification clause 302

Plain/Reinforced cement concrete, in well foundatjon complete as per drawing and technical specification including steel shuttering formwork. PCC M20

Supplying, fiting and placing HYSD bar reinforcement in sub-stucture complete as per drawing and Technical Specifications b) With TATA make reber

P!anReinforced Cement Concrete in Open Foundajon complete as per Drawing and Technical Specifications. C. RCC Grade M20 Case-I: Using Concrete mixer Beam

M/S MORAMI ENTERPRISE