Maint and petty repairs of B/R nature works through online complaints under AGE B/R-I of GE Satwari

Amount

Notes: - Rates quoted for all items of BoQ shall be inclusive of provision as under: - (a) Making arrangement for establishment of centralized complaint centre in the existing building (b) Contractor shall be given user id and password for accessing the online complaint portal and he shall feed the data in respect of complaints so generated at his own expense by himself or through his representative. (c) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the cell for updation of manual registers. (d) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract. (e) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (f) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (g) Updating status of lodged complaints on daily basis. (h) Basic inputs required to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complainant & mobile / telephone No with exact nature of complaint . (j) On lodging the complaint, the Complaint No will be assigned for reference. Also system should indicate an approximate time for repair. Accordingly, a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen.

(k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending, probable time required for attending the pending complaints etc. (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least twice a week to check the efficacy of the system and record their remarks accordingly. Space for complaint cell/Office and Store will be provided by the Department. (o) The tradesmen engaged in the contracts shall be ITI qualified from a govt recognised institute and the contractor is required to get the same approved from Accepting Officer (before applying for their security passes) immediately on acceptance of contract. (p) All tradesmen shall be dressed in a common uniform and quoted rates should be inclusive of that. Tradesmen not wearing uniform shall not be allowed in the gate and any loss on that account shall be attributable solely to the contractor.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F in repair UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed

S&F in repairs stack clamp out of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes of dia 100 mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ terrazzo dado from wall surface including cement mortar bedding, (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specied and directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & moulding the edges,making hole for gas pipe over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified dark (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed . Note:- The work shall be executed in patch work

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting , dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting and mirror polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling existing unservicable floor tile of any description including bedding/screed layer and M&L for 7 to 8mm thick non skid coloured ceramic tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:4 complete all as specified and directed.

Dismantling existing unservicable floor tile of any description including bedding/screed layer and M&L for glazed ceramic coloured tiles,300x450x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

All as per Ser item 14 here-in- before but except pipe

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

All as per Ser item 17 here-in- before but except pipe

M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all a specified and directed

S&F in repair PVC white colour seat cover for EWC complete with mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair PVC flushing cistern of capacity 10 litre , valve less, syphonic action type, low level, white/ coloured with inlet ball valve, float and handle including brackets & PVC flush pipe of 32mm dia complete all as specified and directed .

S&F in repair vitreous china wash hand basin, white, flat back of size 630x450mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed

S&F in repair vitreous china corner wall hung wash hand basin, white, of size 555x420mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinges and 'P' or 'S' trap device complete all as specified and directed

S&F in repair chromium plated grating 125mm dia suitable to existing trap complete all as specified and directed.

S&F in repair Shelf of PTMT, fixed with and including chromium plated brass screws and plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in rapair Chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel ring of 150mm dia, fixed with CP brass screws including plastic beads complete all as specified and directed.

S&F in repair Towel rail, 600mm long of PTMT, fixed with and including chromium plated brass screws and plastic cleats ( minimum weight 190gms ) complete all as specified & directed

S&F in repair Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule of bore 20mm complete all as specified and directed.

S&F in repair Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule of bore 25mm complete all as specified and directed.

S&F in repair bib taps, chromium plated, fancy type,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair bib tap with flange, long body, chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair pillar tap, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair sinks , made of 1.0mm thick stainless steel,overall size of sink 495mm x 420mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe, union, chromium plated waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F in repair sinks with drainage board, made of 1.0mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F in repair 15mm dia stop cock, cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .

S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair angle valve 2 in 1,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair brass spindle (half round) for 15mm dia bib tap complete all as specified and dircted.

S&F in repair brass spindle for 15mm dia stop cock complete all as specified and dircted.

S&F in repair PVC connection 15 mm x 600 mm including PTMT check nut at both ends complete all as specified and direced.

S&F in repair brass chromium plated shower rose 125 mm of dia with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair PTMT 32mm dia waste pipe, suitable for WHB complete all as specified and directed.

S&F in repair PTMT 40mm dia waste pipe, suitable for sink complete all as specified and directed.

S&F in repair Chromium plated waste coupling, 32mm dia , suitable for WHB complete all as specified and dircted.

S&F in repair Chromium plated waste coupling, 40mm dia , suitable for WHB complete all as specified and dircted.

S&F in repair PVC syphon with knob for PVC flushing cistern of capacity 10 Ltr complete all as specified and dircted.

Disconnecting existing tanks of capacity upto 500 ltrs, setting aside (or lowering if required) for repairs etc and hoisting if required, including cleaning and removing all scale and dirt , etc from the the tank & from the mouths of circulating pipes etc,reconnecting and re-fixing in position including mentionening date of cleaning with paint complete all as specified and directed.

Disconnecting existing tanks of capacity 1000 ltrs, setting aside (or lowering if required) for repairs etc and hoisting if required, including cleaning and removing all scale and dirt , etc from the the tank & from the mouths of circulating pipes etc,reconnecting and re-fixing in position including mentionening date of cleaning with paint complete all as specified and directed.

M&L for dismantling of water tank of capacity exc 250 ltrs but n. exc 500 ltrs and removing complete all as specified and directed.

M&L for dismantling of water tank of capacity exc 500 ltrs but n. exc 1000 ltrs and removing complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F in repair plastic cover (thread type) for PVC water tank of capacity 500/1000 ltrs complete all as specified and dircted.

S&F in repair brass chromium plated central hole basin mixer for hot and cold water, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair brass chromium plated wall mixer/sink mixer for hot and cold water, screwed down for iron of bore15mm complete all as specified and directed.

S&F in repair brass chromium plated jet nozzle with 600mm long PVC connection for EWC including fixing device complete all as specified and directed.

S&F in repair kitchen plate rack of size 900 mm x 900mm x 250 mm, made out of stainless steel not less than 1mm thick with fixing acessories complete all as specified and dircted.

S&F in repair chromium plated hand shower (health faucet) with 15mm dia & 1.25m long flexible tube and ABS wall hook complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site complete all as specified and dircted.

Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fasts and including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fasts and including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial plywood .The size of rail and stiles as per IS: 1003(Part-1),kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood , glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers size of members of shutters as specified in SSR Part-I Section-8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification complete all as specified and directed.

Pressed steel cup board frame of size 60 x 40 mm with rebate of 20 mm wide and 12 mm deep,made out of 1.25 mm thick mild steel sheet including PCC 1:3:6 type C1 as in back fill to frame complete all as specified and directed.

S&F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed complete all as specified and directed.

S&F in repair 18/19 mm thick MDF board as in shutters/shelves etc, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (10 to 5 mm thick three side and 20 to 15 mm thick leaping hinge side) around the shutter and fixed with screws complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolts, 200mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F in repair 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate including fixing to pressed steel frames with necessary welding work complete all as speciied and directed

S&F in repair 100mm long mild steel butt hinges, medium weight, cold rolled fixed with screws/welding complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled fixed with screws/welding complete all as specified and directed.

S&F in repair Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F in repair aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F PVC board 20mm thick,one side UV printed designing and back side plain colour printed for cup board or kitchen cabinet with self ,drawer,shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body), designation No 2, universal type suitable for door shutter 701mm to 850mm width and weight between 36 to 60 kg complete all as specified and directed.

S&F metal door seal (Brush type) of width not less than 38mm and length exc 800mm but n.exc 1000m ,fixed with screws complete all as specified and directed .. .

S&F hasp & staple 125 mm in length, safety type, aluminum anodised with steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed.complete all as spd and direcetd.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty 1 to 2 mm thick complete all as specified and directed.

M&L for prepration of new plastered surfaces of ceiling and applying two coats of white wash over a coat of wall care putty 1 to 2 mm thick complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel/ aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed

S&F 3 mm thick , figured glass, pin head type and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed .

S&F in repair stainless steel wire cloth 0.63mm normal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples/wooden beads complete all as specified and directed.

S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

M&L welding in repairs n exc 2.5 cm in length, in metal of thickness n. exc 6mm for fixing hinges/bolts etc complete all as specified and directed .

M&L welding in repairs exc 2.5 cm but n exc 5.0 cm in length, in metal of thickness n. exc 6mm for fixing hinges/bolts etc complete all as specified and directed .

M&L for Re-screwing or easing & adjusting without taking down shutter of any description exc 1.5 Sqm & n.exc 2 Sqm complete all as specified and directed

S&F in repair 40mm dia, cupboard/dressing table knobs, fixed with nut,screw and washer of mild steel,bright finish complete all as specified and directed

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

S&F in repair stainless steel bracket of size 150mm, suitable for curtain rod of dia 25mm, made in shape and size complete all as specified and directed

S&F in repair stainless steel end balls, fancy type and suitable for curtain rod of 25mm dia complete all as specified and directed

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

M&L for repair/removing air lock from GI pipe of any size by opening of joints/fittings abd refixing the same after the job complete all as specified and directed

M&L for repair to leakage water in pillar tap, stop cock, angle valve, bib tap of any description by replacing the washer and other fixing accesorries required and refixing the same in origninal position complete all as specified and directed

M&L for repair /adjustment to washer/siphon etc for high or low level flushing cistern, any type, any make including replacement of washer, check nuts, plug etc and making it functional complete all as specified and directed

M&L for fixing only in repair loose existing pelmets boxes/Curtain rods by embedding wooden gutties in cement mortar 1:3 with MS clips and screws etc (length of pelmets box n.exc 1.5m) complete all as specified and directed

M&L for Repair/treatement of seepage/ leakage area of wall and ceiling by scrubbing down effected area with wire bruss ,metal patti as required and apply water proofing putty and other water proofing chemical required as per site condition and make good with distemper and white wash to match with the existing surface complete all as specified and directed

M&L for Cleaning of floor,wall tile,EWC and washing area with acid,detergents & other material as required complete all as specified and directed

M&L for Cleaning/refixing of grating,kitchen plate rack,sink etc with white cement and other fixing accessories as required complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all specified and directed

S&F Mild steel framed work conforming to Fe-290 (Gde E-165) as in doors or gates, shouldered with steel windows/ ventilators frames, cooler stand, ladder, angle iron or other section and fastening arrangement including welding complete all as specified and directed .

S&F in repair Bib tap 15 mm bore,standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed (Min weight 90 gms) complete all as specified and directed

S&F in repair Bib tap long body 15 mm bore, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed (Min weight 105 gms) complete all as specified and directed

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair corner glass shelf of size not less than 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

M&L for Grubbing up vegetation, small trees from roots ,clean the loose dirt with water and repair the same portion with cement mortar 1:3, tuchup with same finish, area not exc 0.10 Sqm each, adjacent to CI pipe upto 4th storey building with necessary scaffolding/ ladder complete all as specified and directed .

S&F in replacement of GI Elbow 15mm bore complete all as specified and directed.

S&F in replacement of GI socket 15mm bore complete all as specified and directed.

S&F in replacement of GI union 15mm bore complete all as specified and directed.

S&F in replacement of GI Tee 15mm bore complete all as specified and directed.

S&F in replacement of GI reducer 15mm bore complete all as specified and directed.

S&F in replacement of GI nipple 15mm bore of length 50mm complete all as specified and directed.

S&F in replacement of GI nipple 15mm bore of length 75mm complete all as specified and directed.

S&F in replacement of GI nipple 15mm bore of length 100mm complete all as specified and directed.

S&F in replacement of GI nipple 15mm bore of length 150mm complete all as specified and directed.

S&F in replacement of GI Elbow 20mm bore complete all as specified and directed.

S&F in replacement of GI socket 20mm bore complete all as specified and directed.

S&F in replacement of GI union 20mm bore complete all as specified and directed.

S&F in replacement of GI Tee 20mm bore complete all as specified and directed.

S&F in replacement of GI reducer 20mm bore complete all as specified and directed.

S&F in replacement of GI nipple 20mm bore of length 50mm complete all as specified and directed.

S&F in replacement of GI nipple 20mm bore of length 75mm complete all as specified and directed.

S&F in replacement of GI nipple 20mm bore of length 100mm complete all as specified and directed.

S&F in replacement of GI nipple 20mm bore of length 150mm complete all as specified and directed.

S&F in repair Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F in repair Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 25mm bore complete all as specified and directed.

S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:4 in patches n.exc 1.0 sqm each on brick work or concrete surfaces, surface finished even and smooth without using extra cement and finishing the surfaces with matching finishing of adjacent area complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 in patches exc 1.0 sqm but n.exc 2.0 sqm each on brick work or concrete surfaces, surface finished even and smooth without using extra cement and finishing the surfaces with matching finishing of adjacent area complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 in patches n.exc 1.0 sqm each on brick work complete all s specified and directed.

S&F in repair PTMT cabinet with mirror of size 330x430mm fixed with screws complete all as specified & directed

M/S Shesh Paul Gupta (BID ID -3308329)

M/S ANIL MAHAJAN (BID ID -3308729)

J P TECHNO (BID ID -3307112)

THAKUR BUILDERS AND CO (BID ID -3308211)