KNMT2025-2026 - 55 Paver Block

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification - 1m3 For Drainage

Plain Cement Concrete 1:4:8 (One Part of cement, Four Part of sand, and Eight Part of Aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete to site and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Steel shuttering with MS Sheets and MS angels including fixing in position with country wood scantlings for drain side walls including cost and conveyance of all materials and all labour charges to site and other incidental charges etc., complete. asper standard specification 86K, 86A

Vibrated Plain Cement Concrete 1:2:4 (One Part of cement, Two Part of sand, Four Part of Aggregate) mix using 20mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete to site and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Providing, laying, spreading and compacting stone aggregate to wet mix macadam 250mm thick specification including premixing the materials with water at omc in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with pavers in sult base / base course on well prepard surface and compacting with vibratory roller to achive the desired density including cost of materials labour rentals for machinery fuel and all other incidentals charges etc complete as per clause 406 of MORTH REV -5

Providing and laying of 83 mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.

Please Enable Macros to View BoQ information