Karnataka

AOC

Works

Bridges/Culverts

CONSTRUCTION OF BRIDGE AT BENACHI - BALAGERI ROAD IN ALNAVAR TALUKH

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Dharwad, Karnataka

Amount: ₹1.7 CrCloses: 16 Aug 2025Closed

Timeline

Published5 Aug 2025
Closed16 Aug 2025
Awarded—

Bids

1 Bid16 Aug 2025

#	Company	Amount	Status
1	NINGANNA GOUDA ₹1.7 Craccepted-aoc	₹1.7 Cr	accepted-aoc

Tender Value

₹1.7 Cr

EMD Value

₹2.5 L

Closing Date

16 Aug 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

R M Soppimath

Office Number

Work Description

CONSTRUCTION OF BRIDGE AT BENACHI - BALAGERI ROAD IN ALNAVAR TALUKH

Tender Information

Tender ID

RDPR/2025-26/BR/WORK_INDENT17057

Reference Number

RDPR/2025-26/BR/WORK_INDENT17057

Tender Type

Open

Product Category

Bridges/Culverts

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period 2020-21 to 2024-25 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover in all classes of civil Engineering construction works only of Rs.336.22 Lakhs usually not less than the Two times of the estimated cost under this contract

RequiredIn last five years 2020-21 to 2024-25 Satisfactorily completed as a prime contractor for at least one similar nature of work done 50 percentage of the cost of the work i.e., not less than the amount Rs. 84.05 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs 45.85 lakhs. Credit lines or letter of credit or Certificates from Banks for meeting the fund requirement etc. usually the equivalent of the estimated cash flow for three months in peak construction period . As per the perform given particularly for this work only.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredAssessed available tender capacity -AxNx1.5 - B Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2020-21 to 2024-25 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

RequiredTenderer should upload address and contact number.

RequiredTo qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1.RCC/PCC-690.33 Cum 2.Steel-44.40 Tonne 3. Excavation/Embankment/Subgrade-4126.32 Cum 4.GSB-160.64 Cum

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional Tenders will not be accepted

Contractor should upload KPWD renewal registration copy.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contractor shall have to give guarantee for 1 year maintenance.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Contractor should obey with the above conditions in addition to the KW-4

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2020-21 to 2024-25) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs.336.22Lakhs (usually not less than the Two times of the estimated cost under this contract.)

In last five years (i.e., 2020-21 to 2024-25) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.84.05 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs 45.85 lakhs. (Credit lines/ letter of credit/ Certificates from Banks )for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in peak construction period).(As per the proforma given) particularly for this work only.

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

To qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1.RCC/PCC-690.33 Cum 2.Steel-44.40 Tonne 3. Excavation/Embankment/Subgrade-4126.32 Cum 4.GSB-160.64 Cum

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC at the time of aggrement (NSC should be fledge in the name of Executive Engineer)

Assessed available tender capacity - (AxNx1.5 - B) Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2020-21 to 2024-25 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extention of time.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Work Done Certificate

The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.

Audited CA Certificate of Annual Turnover

The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required.

Others -- Work Done certificate should be isuued from not below the rank of Executive Engineer with complete Indent No.

Capabilities of Vendor

The Tenderer should possess valid Registration Certificate.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Audited CA Certificate of Annual Turnover

Line of Credit

Audited CA Certificate of Annual Turnover

Others

The contractor should scan the GST Certificate

GST Registration

The contractor should scan the PAN card& Contact Details

Others -- Contact Details

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,250

EMD Fee Amount

₹2.5 L

Important Dates

Last Activity

16 Aug 2025

Published

5 Aug 2025

Bid Opening

18 Aug 2025

Download Ends

14 Aug 2025

Pre-Bid Meeting

14 Aug 2025

BOQ Preview

•

CONSTRUCTION OF BRIDGE BENACHI - BALAGERI ROAD IN ALNAVAR TALUKH

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Removing all type of hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works.

•

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification MORTH Specification No. 2700

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). MORTH Specification No. 1500,1600 1700...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) MORTH Specification No. 2702

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification A. Granular materialc Reference to MORTH Specification No. 710.1.4 of I...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification MORTH Specification No. 2705

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment/wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with sl...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vert...

•

Filler joint Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification

•

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...

•

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 percent bitumen by weight

•

FOR ROAD. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unse...

•

Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

BY MIX IN PLACE METHOD Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front en...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification MORTH Specification No. 2504

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. A.Stone/Bou...

•

SERVICE ROAD Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of u...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Kaagaz_20250709_152301621183.pdf

Others - Detail Estimate • 3.45 MB

17057 Benachi-Balageri road.doc

Tender Document • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NINGANNA GOUDA

₹1.7 Craccepted-aoc