REPAIR TO SOFA SET AND CERTAIN MAP FURNITURE AND POLISHING/ PAINTING TO FURNITURE UNDER GE (EAST) JALANDHAR CANTT

Amount

SOFA SET 5 SEATER (Drg No- FD-1113) (3+1+1) : Material and labour for repair & replacement of the following part of sofa set without disturbing the other component including tightening of frame all as specified, shown on drg and directed:-

Replacement of foam cushion for seat & back of sofa set made of flexi polyurethane foam of 40 density of size 21” x 22” x 100mm thick with tapestry cover (Cost not less than 350/- per Mtr of shade and colour as approved by GE) over a cover of markin cloth of best quality complete (Each Set consisting of 05 Nos Seat cushions & 05 Nos Back cushions). Make of Foam:- Kurlon/Sweet Dream/ Sleepwell

Replacement of wooden arm of sofa set with new 1st class hard wood arm of existing shape & size.

Replacement of wooden batten of sofa set with new 1st class hard wood batten of existing shape & size all as specified.

Replacement of wooden long rail of sofa set (for 3 seater) with new 1st class hard wood long rail of existing shape & size.

Replacement of wooden front/ rear rail with new 1st class hard wood long rail of existing shape & size.

Replacement of wooden side rail of sofa set with new 1st class hard wood short rail of existing shape & size.

Replacement of wooden leg of sofa set with new 1st class hard wood leg of existing shape & size.

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

REPAIR OF CHAIR COMPUTER (Drg No -FD/E6/MAP/01) Material and labour for repair & replacement of the following components of chair computer complete all as directed:-

Removing of worn out/ unserviceable tapestry cloth, foam etc. from seat of chair and providing new tapestry cloth over new polyurethane foam cushion 75mm thick, 40 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Replacement of worn out/ unserviceable tapestry cloth, foam etc from back of chair and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Replacement of broken/ worn castors wheels and supply and fixing new casters wheels (not less than 50mm Dia).

Replacement of broken arm handles and supply and fixing new arm handle as existing.

Replacement of old unserviceable hydraulic lifting mechanism (spindle) and supply and fixing new lifting mechanism as per existing.

Replacement of locking key of shaft and supply and fixing new locking key as existing.

Replacement of broken PVC base with castor wheels and supply and fixing of new PVC base with castor wheels complete.

ALMIRAH LARGE/ MED STEEL HALF HANGING & HALF SHELVES FD-1033, 1034 FD/E6/MAP/I8 FD-1031, 1032 Material and labour for repair & replacement of the following components of almirah large steel & small complete all as directed:-

Repair to almirah large steel such as removing dents from shuttes, back, top, bottom and sides of almirah, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of red oxide where ever required all as specified and directed

Supply and fixing in replacement welding of legs made of 1.0mm thick (nominal thickness) MS sheet complete with a coat of red oxide over a coat of primer complete all as specified, directed and as shown on drgs.

Supply and fixing shutters left/ right of almirah fabricated out of 1.0mm thick (nominal thickness) MS sheet complete with a coat of red oxide over a coat of primer complete all as specified, directed and as shown on drgs.

Supply and fixing in replacement of shelf made of 1.0mm thick (nominal thickness) MS sheet complete with a coat of red oxide over a coat of primer complete all as specified, directed and as shown on drgs.

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys Make as per sample all as approved and specified.

Supply and fixing in replacement locking device & SS handle as per existing pattern and design to any type of almirah complete all as specified and directed

Material and labour for spray painting to almirah large steel inner and outer surface with one coat of primer paint and synthetic enamel paint olive green including preparation of surface after cleaning dust/ dirt with emery paper complete all as specified and directed

RACK STEEL 6 TIER (DRG NO FD-1038) Material and labour for repair & replacement of the following components of rack steel complete all as directed:-

Removing unserviceable shelf of rack steel adjustable and supply and fixing new shelf made out of 1.0mm thick (nominal thickness) MS sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Painting of rack steel after smoothing of surface with red oxide primer & one coat of olive green paint complete all as specified and directed

CHARPOY FOLDING IP WITH HARD TOP (DRG NO FD-388(R) Material and labour for replacement of the following parts without disturbing the other components including tightening of frame complete all as directed:-

Supply and fixing 12mm thick commercial ply as in top of charpoy as per existing shape & size complete all as specified and directed Make : Kitply/ Greenply/ Century/ Duro

Material and labour for preparation of steel surface of charpoy hard top enamel paint over a coat of red oxide primer on repaired surfaces and one coat of black synthetic enamel paint/ olive green over old surfaces after repair to components, dents, bents and re-fixing of existing MS legs, frame, stiffeners, rails, FI strips etc. by welding/ tightening as per existing and making the bed serviceable complete all as specified and directed

BED HARD (MAP) (Drg No-FD/E6/ MAP/08(R) Material and labour for replacement of the following parts without disturbing the other component including tightening of frame all specified, shown on drg and directed:- Note : The work will be executed either at site or at BSO Furniture Yard to avoid the loss of manpower and transportation.

Supply and fixing 12mm thick commercial ply as in bed/ charpoy top as per existing shape & size complete all as specified and directed. Make of Ply: Kitply/ Greenply/ Century/ Duro.

Chair Varandah (Drg No. FD-259 & FD/MAP-II/06) Matrial and labour for cutting and removing of old cane of chair verandah and recanning of chair with cane plastic 4mm half round wide, white in colour complete all as specified and shown on drg and as directed by Engr-in-Charge. Note : The work will be executed either at site or at BSO Furniture Yard to avoid the loss of manpower and transportation.

Removing of existing old worn out/ unserviceable PVC seat and back of verandah chair and providing new PVC seat & back as per drg and as directed by Engineer-in-Charge

Preparation of old surfaces of chair verandah and applying one coat of synthetic enamel paint white complete all as specified and directed by Engineer-in-charge.

CHAIR WRITING CUSHIONED (DRG NO FD-1107) Material and labour for repair/ replacement of the following components of chair writing without disturbing the other component including tightening of frame complete all as specified and directed.

Removing of worn out/ unserviceable tapestry cloth from seat and providing new tapestry cloth with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Removing of old worn out/ unserviceable tapestry cloth from back and providing new tapestry cloth over with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Replacement of legs & arms handles with new arms handle as existing complete all as specified and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

CHAIR DINNING JCO/ OR (Drg No. FD/MAP-II/05) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per srl item No 9.00 above but rear leg

All as per srl item No 9.00 above but side/back/front rail of seat

All as per srl item No 9.00 above but stiffener of back

Material and labour for PVC seat size 405mm x 430mm x 440mm, 4mm thick with hole of chair dining with SS screw white/ cream colour all as shown in drawing and as specified incluidng taking down old unserviceable PVC seat complete all as specified and directed. Make : Amco

Polishing old surface with one coat and new surface with two coats of French polish including proper wood filer material and preparation of surface after repairing of items complete all as specified and directed.

TABLE WITHOUT DRAWERS (900MMx 600MM x 760MM) (Drg No. FD-1007, 1008) Material and labour for providing front or rear leg of MS Sqr pipe complete of table w/o drawers and also dismantling & removing of old unserviceable parts from the frame complete all as specified and directed by Engineer-in-charge.

Removing unserviceable top and supply and fixing new table top made of 18mm thick prelaminated particle board melamine faced ISI marked including teak wood beading all round the table fixed with nails of table complete all as specified and directed by Engineer-in-charge.

Right side drawers made of 1.00mm thick (Nominal thickness) MS sheet & lock 6 levers of SS with two keys duly painted with one coat of olive green paint over a coat of primer complete all as specified and directed.

Painting of table 900mmx600mmx760mm without drawer steel after smoothing of surface with red oxide primer and one coat of olive green paint complete all as specified and directed

TEAPOY VERANDAH MAP (Drg No. FD/E6/MAP/17) Removing unserviceable top and supply and fixing new top made of 18mm thick prelaminated particle board melamine faced ISI marked including PVC black beading all round the table fixed with nails complete all as specified and directed by Engineer-in-charge.

Table top made of 18mm thick prelaminated particle board melamine faced ISI marked including PVC black beading all round the table fixed with nails complete all as specified and directed by Engineer-in-charge.

Painting of teapoy varandah steel base after smoothing of surface with one coat of black enamel paint complete all as specified and directed

CHARPOY HARD TOP (Drg No. FD/MAP-II/01) Removing the unserviceable plywood from charpoy MS pipe and tightening complete all as specified

Removing the old welding spots from broken welding joints and re-welding in legs, long rails and short rails of charpoy hard top complete all as specified and directed

Supply and fixing new 12mm thick plywood BWR grade, ISI marked, commercial complete all as specified and directed

CHAIR SCHOOL WITH HAND BOARD (Drg No. FD/E6/MAP/05) Removing the existing unserviceable broken hand board from chair school with hand board and supply and fixing new hand board made out of 18mm thick prelaminated particle board exterior grade duly with PVC lipping complete all as specified and directed

Removing the existing unserviceable broken PVC moulded seat and hand board PLPB 18mm with teak wood beading of chair school with hand board and supply and fixing new PVC moulded seat and hand board complete all as specified and directed

Preparation of surfaces of chair school with hand board and painting with one coat synthetic enamel paint of approved colour complete all as specified and directed

TEAPOY VERANDAH MAP (Drg No. FD-383) Removing unserviceable top and supply and fixing new top made of 18mm thick prelaminated particle board melamine faced ISI marked including teak wood beading all round the table fixed with nails complete all as specified and directed by Engineer-in-charge.

Painting of teapoy steel base after smoothing of surface with one coat of white paint complete all as specified and directed

TABLE OFFICE CLERK STEEL (Drg No. FD-1004) Removing the following unserviceable part of table office clerk steel and supply and fixing new one all as specified and directed by the Engineer-in charge:-

Drawer made out of 1.00mm thick (nominal thickness) MS sheet duly painted with one coat of olive green paint over a coat of primer complete all as specified and directed

Lock 4 lever for drawer with duplicate key as per sample complete all as specified and directed

Table top made of prelaminated particle board 18/19mm thick and wood beading complete all as specified and directed

Painting of table office clerk steel after smoothing of surface with one coat of olive green paint complete all as specified and directed

TABLE OFFICE OFFICER STEEL (Drg No. FD-1003) Removing the following unserviceable part of table office officer steel and supply and fixing new one all as specified and directed by the Engineer-in-charge.

Drawer made out of 1.00mm thick (nominal thickness) MS sheet duly painted with one coat of olive green paint over a coat of primer complete all as specified and directed

Door unit made out of 1.00mm thick (nominal thickness) MS sheet duly painted with one coat of olive green paint over a coat of primer complete all as specified and directed

Lock 4 lever for drawer & door unit with duplicate key as per sample complete all as specified and directed

Table top made of 18/ 19mm thick prelaminated particle board and teak wood beading complete all as specified and directed

Painting of table office officer steel after smoothing of surface with paint red oxide primer and one or two coats of olive green paint complete all as specified and directed

CHAIR EASY CUSHIONED (Drg No. FD-358) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints of sizes and section complete all as specified and as shown in drg wrought on all sides as directed by Engr-in-Charge.

All as per srl item No 17.00 above but rear leg

All as per srl item No 17.00 above but arms

Removing of worn out/ unserviceable foam from seat and back of chair easy cushioned and providing new polyurethane foam cushion 75mm thick & 50mm thick, 40 density and fabric fixing in shape on 4mm thick ply all as per existing and as shown on drgs and as per design of existing chair. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Polishing old surface with one coat and new surface with two coats of French polish including proper wood filer material and preparation of surface after repairing of items complete all as specified and directed.

CHAIR CBA TUBELER STEEL AND CBB STEEL (Drg No. FD-75 (M)) Removing the following unserviceable part of chair CBA steel and CBB steel and supply and fixing new one all as specified and directed by the Engineer-in-charge.

Seat & back of shisham wood duly canned as per godrej pattern complete all as specified and directed.

Handle of shisham/ hard wood made to shape as shown in drg and screwed properly in repairs & PVC rubber cap at the top of back of frame complete all as specified and directed.

Painting of frame with one coat of olive green & black enamel paint over the coat complete all as specified and directed

om parkash and sons

G S Builders