Loading…
Loading…
Tender Value
₹81.6 L
EMD Value
₹1.6 L
Closing Date
22 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
TENDER/EAS
16 conditions · 2 needing a document upload
10.2. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less : where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual Contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: As per Clause 10.1 of Part-I of IRSGCC-2022 with advance correction slip and up to date (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 10.1 of IRSGCC-2022 with advance correction slip and up to date: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Experience in any track work.
28 conditions · 4 needing a document upload
Whether required test certificates/samples, if any have been uploaded?
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his Own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) I Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. , The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Attorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a)Clause 17 of GCC - Part-1, for JV b)Clause 18 of GCC - Part-I, for Partnership Firm.
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, contact number (ii) Copy of PAN card (iii) Copy of GSTIN card.
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/Contractor not having NEFT form may down load the empty NEFT form available in Document site)
Submission of Annexure-V under document verification certificate- As per Advance Correction Slip No.4 dt.7/8/2023 to GCC - 2022, the tenderers shall submit copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder in form Annexuere-V Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid.
Submission of Annexure-V(A) under Document Verification Certificate. In case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case my be. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid.
Track Maintenance works in Senior section Engineer/P.Way/Pattukkottai section for a period of one year.
TPJ-09-2026-11~SR
TPJ-09-2026-11
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹1.6 L
22 Jun 2026
29 May 2026
8 Jun 2026
22 items across 1 schedule · ₹68,92,788.3 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For 1.00m long fishplates | Joint | 230.00 | 139.62 | 32,112.6 |
| 2 | For 610 mm long fish plates. | Joint | 200.00 | 97.26 | 19,452 |
| 3 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates applying departmental Grease graphite grade (IS:408) to fishing planes and bolts departmental black oil as per procedure down in latest version of IRPWM, including tools required and as directed by Engineer-in- charge. Note: 1. Grease Graphite, black oil, bolts, K.Oil, wire brush, required for work shall be given by department and issued concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer replaced with new bolt. | Set by 'O' by laid all fish at and | 166.00 | 58.37 | 9,689.42 |
| 4 | Lubrication of Elastic Rail Clips on PSC sleepers as per procedure prescribed in latest edition IRPWM with Railway's grease. | ERC of | 646440.00 | 2.69 | 17,38,923.6 |
| 5 | By using Railway's Grease graphite | Each | 19500.00 | 33.91 | 6,61,245 |
| 6 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and directed by Engineer-In charge. | TRM by as | 30000.00 | 29.22 | 8,76,600 |
| 7 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble , 3 pieces Mould (Zircon washed) and Compressed Air Petrol/LPG pre heating technique | Each | 30.00 | 2,196.11 | 65,883.3 |
| 8 | For PSC Sleeper | TRM | 3000.00 | 99.38 | 2,98,140 |
| 9 | For 52 Kg Rails | TRM | 12500.00 | 85.64 | 10,70,500 |
| 10 | Kilometre & Gradient post | Each | 200.00 | 100.96 | 20,192 |
| 11 | Hectometre Post | Each | 850.00 | 116.65 | 99,152.5 |
| 12 | Level Crossing Boards including Road Sign Boards | Each | 228.00 | 209.06 | 47,665.68 |
| 13 | Level Crossing Boom including fringe | Metre | 76.00 | 177.45 | 13,486.2 |
| 14 | Bridge Board | Each | 28.00 | 184 | 5,152 |
| 15 | Bridge Height Gauge | Each | 50.00 | 3,204.21 | 1,60,210.5 |
| 16 | HFL, FSL & DL on Bridge Pier / Abutment | Each | 100.00 | 753.44 | 75,344 |
| 17 | For day time block working | TRM | 10000.00 | 21.05 | 2,10,500 |
| 18 | Removing and refixing of guard Rails over slab bridges during machine packing with contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning crossing of track etc, and as directed Engineer In charge. | TRM all and by | 1300.00 | 116.39 | 1,51,307 |
| 19 | 60 Kg - 110/90 UTS - On Running Line | Each | 75.00 | 383.76 | 28,782 |
| 20 | On Running Line | Each | 50.00 | 90.38 | 4,519 |
| 21 | Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing location on 60kg/52kg rails on cess or under traffic block with contractor's tools and plant, equipment, consumable, labour etc complete directed by the Engineer in charge at site. | Each and as | 50.00 | 53.93 | 2,696.5 |
| 22 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 1500.00 | 867.49 | 13,01,235 |
| Schedule total | ₹68,92,788.3 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
JPO.pdf
ATTACHMENT
Registersatworksite.pdf
ATTACHMENT
Tenderformfirstpagesecondpage.pdf
ATTACHMENT
annexureforcommercialcomplaince.pdf
ATTACHMENT
annexurefortechnicalcomplaince18122022.pdf
ATTACHMENT
PPEforsafetyinconstructionsite_1.pdf
ATTACHMENT
Annexure-V-VA-16082023.pdf
ATTACHMENT
SpecialConditions-updationoflabourdata.pdf
ATTACHMENT
Policeverificationformcontractualstaff.pdf
ATTACHMENT
GCC-April-2022updatedandCSNo-10.pdf
ATTACHMENT
BOCWWcessRBletterdt.02.01.2026.pdf
ATTACHMENT
SpecialconditionsforsubmissionofBG.pdf
ATTACHMENT
ACSNo11forGCC2022.pdf
ATTACHMENT
Specialconditionsfortrackmaintanence.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .