SH road to Narsinghapalli

Clearing and grubbing road land in area of light jungle including uprooting rank vagetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of tress cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including watering and cost of labour, cess & all materials etc. complete as per direction of Engineer in charge.

Construction of embankment with approved material obtained from borrow pits transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road and Bridge works (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge. (Payment of earthwork will be made compacted level section) only

Scarifying the Existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge.

Providing , laying, spreading and compacting stone aggregates using IRC Gr-III size granite metal to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonne in stages to proper grade and camber, applying and brooming requsite type of screening / blinding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MoSRT&H Specifications for Road & Bridge works including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess complete as per direction of the Engineer in charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.40 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD. and as per direction of Engineer-In-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg per sqm on the prepared over BT surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD. and as per direction of Engineer-In-Charge.

20mm thick premix carpet using 0.27cum of 13.2mm 5.6mm size broken chips and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR , hot mix plant, bitumen boilers and all other T & P articles including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge.

6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm. including hire and running charges of PRR, Hot mix plant, tar boilerand all other T&P articals etc including cost and conveyance of chips and bitumen etc. complete as per direction of the Engineer-in-charge.

Earth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-charge.

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.