Loading…
Loading…
Tender Value
₹7.2 Cr
EMD Value
₹14.3 L
Closing Date
3 Aug 2026, 3:00 pm
Baktal Station - Raising of platforms no.1 & 2 and 04 meter wide Foot Over Bridge with 02 ramp landings.
RTM-2026-27-55
RTM-2026-27-55
Open
Works - General
12 Months
Sehore, Madhya Pradesh
₹0
₹14.3 L
9 Jul 2026
9 Jul 2026
20 Jul 2026
Item Breakup - 1-Schedule - A (CPWD DSR Items)
Item Breakup - 2-Schedule - B (IRUSSOR Items)
Shoring with 'Z' section MS sheet piles side by side Sqm in all kinds of soil mechanically or manually as per approved drawing with contractor's own arrangement complete in all respects and removal of sheet piles after completion of the work as directed by engineer in-charge Note: Payment will be made as per actual driven length of pile. RATLAM DIVISION-ENGINEERING/WESTERN RLY Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines.
All kinds of soils Providing and laying in position Plain cement concrete of specified Nominal Mix for miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded cum stone aggregate 20 mm nominal size)
Providing and laying in position machine batched, cum machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. Centering and shuttering including strutting, propping etc. and removal of form for :
All types of bridge sub-structures, e.g. pier, Sqm abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Total 1528392.22
Item Breakup - 3-Schedule - C (IRUSSOR Items)
Ordinary Portland Cement 53 grade of approved MT brands/makes Total 742002.40
Item Breakup - 4-Schedule - D (IRUSSOR Items)
Supplying and fixing HSFG bolts of any dia and any Kg length with suitable nuts including DTI washers conforming to IRS-B1-2001 f o r bridges and steel structures with contractors labour, tools and plants and lead and lift etc., complete. RATLAM DIVISION-ENGINEERING/WESTERN RLY
Supplying and fixing M.S. Angles 65mmx 65mmx Kg 8mm or any other size conforming to IS:2062 in the nosing of steps of stair cases of Foot Over Bridges including provision of 10mm dia, anchor bar 600mm c/c and fixing with main girder with M.S. flat, making anti-slip arrangements over the top of nosing as per approved scheme given by Engineer in charge with all material, labour, T&P as a complete job.
Assembling and erecting pre-fabricated structures, MT such as columns, beams, girders, other members of FOBs and sheds; including leading all structural elements within 1 Km lead, bolting, riveting or welding as per approved drawing or as directed by Engineer In-charge. Rate shall include cost of labour, materials, tools & plants and only pre-fabricated structural elements shall be given by Railway. (Work not requiring traffic or power block). Launching in position, by any approved method, pre- fabricated Steel Girders, precast PSC girders/slabs, casted at casting bed developed at site, to correct alignment and level over the bed block / pedestal with all required arrangements, complete in all respect.
Structural steel plate girders Total 1471050.65
Item Breakup - 5-Schedule - E (IRUSSOR Items)
Above 150 km up to 200 km
Above 200 km Total 193987.95
Item Breakup - 6-Schedule - F (IRUSSOR Items)
JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity
Hydra or similar tyre mounted Pick-n-Carry crane of Hour 12T capacity for misc. works of handling of material Total 296322.00
Item Breakup - 7-Schedule - G (NS Items)
1/NS - Supplying, manufacturing, fabrication, testing Numbers 1710.00 and welding with stud guns etc. of normal headed / round studs shear connections 25 mm dia. and 120 mm length confirming to IS 3935-66 as per specification of RDSO Drg.No.B11753,5251 & RDSO- B- 11757-1 along with ferrules on top flanges of girders for decks labs, as per the direction/approval of Engineer in charge. Incase shear connections/studs of others sizes are required, then payment/ recovery on prorate basis of weight shall be made. the rate is inclusive of all taxes, services charges, transportation, lead & lift, wastage etc. complete in all respect. Nothing extra shall be payable other than the rate quoted. Nothing extra shall be payable against any breakdown of machines. site facilities shall be provided by the contractor at site. The facility of required Electricity of400/440 V power source K/380 KVA DG set, cable400 A switch fuse, loading& unloading the machine from truck and to carry to site shall be done by the contractor.
2/NS - Extra over a over item no. 41322 for MT launching girders under traffic block (Specification for this item will follow the specifications of WR- USSOR-2019 item No.41300/22) Total 739787.10
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Recommendedmakermanufacturerofcivilmaterials.pdf
ATTACHMENT
PCECircularNo88.pdf
ATTACHMENT
PROCEDUREORDERFORENSURINGSAFETYATWORKSITE.pdf
ATTACHMENT
NOrelativecertificate.pdf
ATTACHMENT
certificateforrailwayemployeereengagement_1.pdf
ATTACHMENT
TERMINATIONCONTRACT.pdf
ATTACHMENT
ACS5GCC2022.pdf
ATTACHMENT
07.08.23ACS4.pdf
ATTACHMENT
07.08.23LAUNCHEMB.pdf
ATTACHMENT
BidCapacity-AnnexureVI.pdf
ATTACHMENT
Offloading Part-S-of Work
ATTACHMENT
BidsecurityAnnexure-VIA.pdf
ATTACHMENT
FormatforAnnualcontractualturnoverAnnexure-VIB.pdf
ATTACHMENT
GCCAPRIL2022.pdf
ATTACHMENT
MOUFORJVGCCAPRIL22WITHALLACS.pdf
ATTACHMENT
AnnexureVasperACS4dt07.08.2023.pdf
ATTACHMENT
AnnexureVA.pdf
ATTACHMENT
ACS6GCC2022.pdf
ATTACHMENT
ACS2dt13Dec22.pdf
ATTACHMENT
ACS1GCCAPR2022.pdf
ATTACHMENT
ACS3dt26APR23.pdf
ATTACHMENT
LETTEROFCREDITASMODEOFPAYMENT062018.pdf
ATTACHMENT
Safetyrules.pdf
ATTACHMENT
ProcedureforpaymentofContractorbillasperGSTImplementation_GST_290617.pdf
ATTACHMENT
OffloadingPartSofworkRBLetterNo2022-CE-I-CT-GCC-2020-Polociydt27Apr2022.pdf
ATTACHMENT
LetterNo.2017-CE-I-CT-9date31May2023.pdf
ATTACHMENT
GCC2022CorrectionSlipNo11.pdf
ATTACHMENT
GCC2022CorrectionSlipNo9.pdf
ATTACHMENT
GCC2022CorrectionSlipNo7.pdf
ATTACHMENT
PBGPerformaforTenderdocument30Aug2025.pdf
ATTACHMENT
GCC2022CorrectionSlipNo10.pdf
ATTACHMENT
GCC2022CorrectionSlipNo8.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].