GE/863/EWS-T-28 OF 2020-21

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard and dense soil complete all as specified and directed.

Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in hard / dense soil for foundation etc. complete all as specified and directed.

Dismantling of wall and ceiling boards(fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed.

Material & labour for 4mm Asbestos cement plain building boards, fixed to mild steel work as in ceiling with screw complete all as specified and directed.

Demolition of cement concrete floor and paving not exc 15cm thick below or above ground floor complete all as specified and directed.

M&L for P.C.C 1:4:8 type D-2 usng 40 mm graded stone agg in foundation filling and mass concrete complete all as specified and directed.

M&L for RR stone masonary built in CM 1:6 as in retaining wall, manholes, tank staging complete all as specified and directed.

M/L precast PCC 1:3:6 type C1 using 20mm graded stone agg as bonder stones set in cement mortar 1:6 complete all as specified and directed.

M & L Damp proof course 40mm thick (in cement concrete 1:2 Type B-0) to horizantal or vertical surface including necessary formwork complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed.

M&L For Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in base floor for laying chequered tiles complete all as specified and directed.

Material & labour for Chequered cement concrete tiles 20cmx20cmx25mm thick, set jointed and pointed in neat cement slurry with grey cement & pigments laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

Material & labour for 100mm thick cement concrete type C2, 1:3:6 (using 40mm graded agg) as in plinth protection finishing fair and even complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in floor finishes complete all as specified and directed.

S&F in repair 19mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and directed.

S&F peg stay with six hooks plastic coated complete all as specified and directed.

Taking down Shutters of any description n exc 2 Sqm and removing to store complete all as specified and directed.

S&F floor door stopper 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair complete all as specified and directed.

S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L 35mm thick 2nd class hardwood plain framed panneled shutter (any number of pannels )with pannels of timber flat on both sides (feather edged ) or of veneered particale board medium density wood partical board with commercial face veneers supplied and fitted to chowkat complete all as specified and directed.

S&F flush shutters 30 mm thick solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

Supply & fixing MS barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed.

Supply & fixing MS barrel tower bolt of 150mm long stove enamelled black with bright bolt complete all as specified and directed.

Supply & fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed complete all as specified and directed.

S&F 100mm long MS butt hinges medium weight cold rolled complete all as specified and directed.

Supply & fixing MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed.

S & F aluminium (extruded section) body door closer hydraulically regulated designation 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Taking down damaged/rusted steel works such as steel windows/ventilator etc of any description and in any position complete all as specified and directed.

S&F steel window with side hung shutters fitted with box type hinges incl guard bars, handles peg stay etc incl cutting the holes in wall for fixing the window complete all as specified and directed.

Dismentlingtimber scantling fillets,rails,posts,rafters,purling etc under 40 sq cm in section complete all as specified and directed.

M&L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed.

M & L for 2nd class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 & not exc 6 Sq cm. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and Fix plain sheet glass/pin headded glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares exceeding 0.50 Sqm in each pane with frame work and clips complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking out for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in CM 1:4 on brick work or concrete surface external surface other than fair faces of finished even & fare w/o using extra cement using water proofing compound (WPC) as in outer coat complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete block masonry finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on Concrete surface even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (WPC) complete all as specified and directed.

Material & labour for preparation of new surfaces and & applying Three coat of White wash on AC boards in ceiling complete all as specified and directed.

Material & labour for preparation of new surfaces & applying three coat of white wash on wall complete all as specified and directed.

Material & labour for preparation of old surfaces & applying one coat of distempering complete all as specified and directed.

Material & labour for preparation of new surfaces & applying two coat of distempering over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surface of walls and applying one coats of cement base paint complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over pink primer complete all as specified and directed.

Demolition of PCC block built in cement mortar including all quoins arches pillars , etc complete all as specified and directed.

Material & labour for Precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement morter 1:6 complete all as specified and directed.

M&L for Precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement morter 1:4 complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) Type B1 1;2:4 using 20 mm grade agg stone for Beam cantiliver bressummers Lintels over 1.5 m Span complete all as specified and directed.

M&L formwork to side and soffits of floor or roof beam beam hauching, girder bressummers ,lintels cantilivers shelves including supports overhangs etc. also splays between floor and beams etc. complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and directed.

M&L for TMT bar 6mm to 8mm dia as in stirrups cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and directed.

S&F Rolled mild steel Fe-410-W(Gde- E-250) quality-B Roof trusses (framed) ,trussed, purlings, crane gantries, rails and fasenings and heavy bracket framing (Beam , tee, angle ) channel or flat sections ) including distance pieces , cleats complete all as specified and directed.

Dismentling plain or corrugated steel sheeting any gauge any thickness complete all as specified and directed.

S & F mild steel galvanised iron corrugated sheeting of thickness 0.63 mm with two corrugations side lap, fixed with L-type or J-hooks and washers in roof,walls etcwith grade of zink coating 275 complete all as specified and directed.

Fixing only mild steel galvanised iron corrugated sheeting of thickness 0.63 mm with two corrugations side lap, fixed with L-type or J-hooks and washers in roof,walls etcwith grade of zink coating 275 complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) of class -8 complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges steel handle complete with glazing bars dovertailed or welded complete all as specified and as directed.

M & L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L Preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

M&L for hardcore of guge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed t a true surface complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement. complete all as specified and directed.

Returning filling in including speading,leveling ,watering and well ramming in layer complete all as specified and directed.

M&L removal of excavated Soil to a distance n exc 50m and depositing where directed complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with 1.5 Sqmm multistranded,1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable FRLS for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC Box on top for fixing switches sockets etc. for one light point/ fan /Bell point controlled by one switch complete all as specified and directed .

All as per Srl item No 68.00 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm complete all as specified and directed.

Supply and fixing of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories complete all as specified and directed. Make: Bajaj Cat No. BLRB-DB 118 or equivalent.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing LED lamp 12W system lumen (NOM) 600 with all accessoriescomplete all as specified and directed. Make:Crompton part No-LED 9DFCDL-PRO-BO or equivalent.

Supply and fixing of sheet metal enclosure single door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed.

S&F MCB SPN 40 Amp with rupturing capacity 10 KA complete all as specified and directed.

S&F MCB SP 6 Amp to 32 Amp with rupturing capacity 10 KA complete all as specified and directed.

Supply & Fixing sub main wiring with single core cable 2 x 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable 1100 volts grade in rigid PVC casing caping medium grade along with 1 x 2.50 Sqmm FRLS PVC insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 10401.00

M/S Shamsher Negi Dewa

M/S SHIV NATH ENTERPRISES