REPAIR MAINT OF CEILING FAN EXHAUST FAN DESERT COOLER GEYSER AND ALLIED WORKS IN AGE EM UNDER GE DANAPUR CANTT

Amount

Disconnecting and taking down of burnt winding of ceiling fans including necessary dismantling, cutting and removing of unsv windings, cleaning, segrigation of serviceable and unsv parts including re-windings of stator winding with super enameled copper wire of existing gauge and weight of approved make and brand and taping, quick heat varnishing, baking, drying in heat chamber to obtain proper insulating resistance and reassembling the fans including replacement of unsv parts and re-installation to the existing position and necessary transportation and testing complete for Ceiling Fan of 1400 mm sweep of any make complete all as specified and as directed.

~Ditto~ all as per item No 1.00 above but for ceiling fan 1200 mm sweep of any make

~Ditto~ all as per item No 1.00 above but for Exhaust Fan of 450 mm sweep of any make

~Ditto~ all as per item No 1.00 above but for Exhaust Fan of 300 mm sweep of any make

~Ditto~ all as per item No 1.00 above but for cabin/ padestal fan of 380 to 400 mm sweep of any make. Note For item No 1 to 5 : Rates are deemed to be inclusive for collection of fan from AGE E/M yard under contractor own arrangement, removing defective parts, burnt winding carefully, cleaning & re-assembling the fan after repair i.e. oiling, greasing, washer, lock bolts, connector, cross pin etc, depositing back to AGE E/M yard and testing complete to the satisfaction of Engineer-in-charge. (spare parts will be measured and paid seperately under relevent items)

M&L for identifying and rectifying day to day complaints of fans including taking down celiing fan / exhaust fan / Wall fan of any type / make / sweep from its location at OTM, md accn under GE Danapur Cantt area, servicing of fans after removing blades, opening of fan at site and cleaning ball bearing,gun metal bush, filling grease /oil and changing of nut , screwes, check nuts, rubber reel, nut & bolts of size 15 mm to 60 mm including replacing defective condensor,ball bearing ,conecting wire,gun metal bush,lock nuts, crosspin ,ceiling rose etc if required and re-assembling of fan, blades, down rod, conopy etc and hanging back fan to its original location after cleaning of body, connecting to ceiling rose complete all as specified and directed. Note :- (a) all spare i.e condenser, ball bearing,flexible wire, bush, shall be measured and paid under relevent item. (b) Cost of petty stores such as grease, lubricating oil, varnish, coil tie, lock nut , cross pin,check nuts,rubber seal etc are deemed to be included in quated rate.

Supply only Ball bearing of size 6201 (Make: NBC or SKF).

Supply only Ball bearing of size 6202 (Make: NBC or SKF).

Supply only Ball bearing of size 6203 (Make: NBC or SKF).

Supply only Ball bearing of size 6204 (Make: NBC or SKF).

Supply only fan capacitor 3.15 mfd (Make - Asian / Epcos / Usha).

Supply only fan capacitor 2.5 mfd (Make - Asian / Epcos / Usha).

Supply only fan capacitor 4 mfd (Make - Asian / Epcos / Usha).

Supply only Twisted twin core flexible cable of size 24/0.0076 .

Supply only Gun metal bush for ceiling fan of any size.

Supply only Gun metal bush for exhaust fan of any size .

M&L for spray painting of ceiling fan 1200/ 1400 mm sweep with synthetic enamel paint including filing cavities with filler after cleaning of body, blades, down rods etc by scraping with emery paper including rewriting MES No of fan of letter size 2 cm height, using black paint all as directed.

M&L for spray painting of exhaust fan 300 to 400 mm sweep with synthetic enamel paint including filing cavities with filler after cleaning of body, blades, down rods etc by scraping with emery paper including rewriting MES No of fan of letter size 2 cm height, using black paint all as directed.

Fixing only exhaust fan of any type/sweep obtain from item No. 6.00 after servicing and connecting up including provision of cable of size 23/.0076 from ceiling rose/connector to fan complete all as specified and directed.

Making hole for exhaust fan of suitable size (square/ round) and grouting nuts and bolts of suitable size in and including complete platering and make the disturbed surface as per existing wall complete all as specified and directed.

Supply and fix in repairs down rod for ceiling fan made out of 15 mm dia MS pipe complete with holes, slotted or threaded upto 0.6m long all as specified and directed.

Supply and fix in repairs down rod for ceiling fan made out of 15 mm dia MS pipe complite with holes, slotted or threaded upto 0.75m long all as specified and directed.

~Ditto~ all as per item No 22.00 here-in-before but 0.75 to 1.50m long.

~Ditto~ all as per item No 21.00 here-in-before but 1.50 to 3.0m long.

Supply and fix in repairs ceiling fan clamps of heavy duty as per sample including nut, bolt, spring washers, cross pin and rubber reel etc all as specified and directed.

Supply and Fix in repairs ceiling fan canopy(set of two) with nut and bolt of suitable size complete all as directed and specified.

M&L in replacement of rubber reel for ceiling fan suitable for 1200/1400 mm sweep ceiling fan complete all as directed and specified.

S & F nuts, bolts, washers, in any shape or size as directed including one coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed and specified.

M&L in replacement wall fan blades as per existing pattern and size complete all as directed at site complete all as directed and specified.

M&L in replacement Ceiling fan blades as per existing pattern and size (set of three) complete all as directed and specified.

M&L in replacement of Exhaust fan blades with louver metallic body as per existing pattern and size (set of three) at site complete all as directed and specified.

Taking down the water heater (Geyser) storage type of any make of 25/35/50 litres capacity from any position, after disconnection of all electrical, water supply inlet and outlet connection and transportation to workshop for repair, further dismantling, segregation of serviceable and unserviceable parts, replacement unserviable parts and re-assembly the water heater and installation the same to their original position or as directed after all testing the of water heater complete all as specifed and as directed by the Engr-in-charge. Note :- (a) Cost of transportation shall be deemed to be included in the item rate. (b) Replacement of defective parts shall be measured & paid separately under this BoQ items. (c) Descaling/ Welding/breezing/Painting of water heater if required shall be measured & paid separately under this BoQ items.

M & L for welding/breezing of water heater tank of any size, model at appropriate/bursting area of copper/mild steel inner tank and make 100% leak proof complete all as specifed and as directed.

M&L for descaling of water heater storage tank of any type, size and make good by applying descaling solution.

M & L for appling one coat of synthetic enemal paint first grade of approve make and colour by spray machine after preparation steel surfaces including writing MES No of 40mm size of letter for 50/35/25 Ltrs capacity of water heater complete all as specifed and as directed.

Supply and fix inner tank made of stainless steel for water heater of 50 ltrs capacity of exiting type, model complete all as specifed and as directed.

Supply and fix inner tank made of stainless steel for water heater of 25/35 ltrs capacity of exiting type, model complete all as specifed and as directed.

Supply and fixing apparatus plate suitable for water heater 25 / 35 / 50 ltrs capacity of approved make and as per exiting type and size incl rubber gasket, clips, nuts, bolts, and washers etc complete all as specifed and as directed.

Supply and fixing in repair thermostat switch (ISI mark) suitable for 25 / 35 / 50 ltrs capacity water heater (geysers). Make: Bajaj/

Supply and fixing in repair heating element (rounded / threaded rounded / trangular type base) of capacity 1500/2000 watt suitable for horizontal/ vertical type of geysers 25 / 35 / 50 ltr capacity (ISI mark).

Supply and fixing in repair neon indicating lamp, rectangular /round type as per existing model.

Supply and fixing in repair pressure release valve 15 mm bore (ISI marked) for geyser 25 / 35 / 50 ltrs capacity.

Supply and fixing in repair safety valve for water heater of capacity 25/50 ltrs.

Supply and fixing in repair apparatus plate rubber gasket suitable for six/seven/eight/nine hole assembly of suitable size of water heater of capacity 25/35/50 litres capacity.

Supply and fixing in repair split bottom cover (two pieces) suitable for water heater 25/35/50 litres capacity duly painted, all as directed by Engr-in-Charge.

Supply and fixing 100 mm long and 12 mm dia anchor fastner nut and bolt with suitable washers complete all as specifed and as directed.

M&L for insulating material (glass wool) suitable for water heater insulation complete all as specifed and as directed.

Supply and fixing in repair hot and cold type PVC connection (ISI Mark) having 10 mm dia, 45 cm long with 02 Nos of Unions/ cup shaped pvc cover with washers complete all as specifed and as directed.

Supply and fixing in repair 2.5 Sqmm 3 Core (Nominal Area) PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 complete all as specified and as diriected.

Taking down window/Split type air conditioner for complete serviceing & cleaning with water and suitable cleaning agent properly, cleaning of all filter, checking of refrigerant gas pressure, checking of all spare parts serviceability, tightening carefully loose connection and re-fixing in same position or different location as directed and making the duct air tight by using foam and other necessary packing materials and testing complete all as specified and as directed.

Taking out refrigerator/water cooler/deep fridge of any capacity from store yard / site to the workshop and dismentle the complete eqpt and carry out necessary mechinary work for complete serviceing & cleaning with water and suitable cleaning agent properly, cleaning of all filter, checking of refrigerant gas pressure, checking of all spare parts serviceability, tightening carefully loose connection and re-fixing in same position or deposted to store yard and testing complete all as specified and as directed.

Taking down desert cooler of any capacity for complete serviceing & cleaning with water and suitable cleaning agent properly, cleaning of all filter, checking of all spare parts serviceability, tightening carefully loose connection and re-fixing in same position or different location as directed and testing complete all as specified and as directed.

Supply and fixing in repair compressor for Refrigerator n. exe. 230 Ltr capacity including charging of gas R-134 and anti vibration rubber pad including testing and reinstallation at site or deposited to store yard complete all as specified and directed. Make - Taccumsha /Whirpool / emersion (Kirloskar)/LG

Supply and fixing in repair compressor for Refrigerator of capacity 240 Ltrs above but n. exe. 310 Ltr capacity including charging of gas R-134 and anti vibration rubber pad including testing and reinstallation at site or deposited to store yard complete all as specified and directed. Make - Taccumsha /Whirpool / emersion (Kirloskar)/LG

Supply and fixing in repair compressor for water cooler of any type / make and capacity, recharging of compressor with gas R-134 and anti vibration rubber pad including testing and reinstallation at site or deposited to store yard complete all as specified and directed.

Supply and fixing in repair rotary compressor for air conditioner window/split type 1.5 Ton capacity including charging of Freon R-22 gas up to required level and replacement of anti vibration rubber pad and testing or reinstallation at site or deposited to store yard complete all as specified and directed.

Supply and fixing in repair rotary compressor for air conditioner window/split type 2.0 Ton capacity including charging of Freon R-22 gas up to required level and replacement of anti vibration rubber pad and testing or reinstallation at site or deposited to store yard complete all as specified and directed.

M&L for repair to body of any type of refrigerator / water cooler including cutting of worn out portion & make good the same, denting, craging of existing paint with existing colour approved paint including testing complete all as directed.

M&L for preparation of existing external surface of Refrigerator / water cooler / deep freezer and applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour with spray machine painting and writing MES/SM /Sl No complete all as specified and as directed.

Supply and fixing fan motor for window/Split type air conditioner 1.5/2.0 ton capacity complete all as specified and directed.

M&L for taking out and replacement of refrigerator cooling chamber (freezer assembly) complete of existing size, charging of gas up to required level including testing, reinstallation or deposited to store yard complete all as specified and directed.

M&L for taking out and replacement of condenser for refrigerator of any capacity of existing size & dia, including testing compelte all as specified and directed.

M&L for taking out fan motor from water cooler of capacity 20/40 ltrs and replace with new fan motor complete set as per existing size, model including testing complete all as specified and directed.

M&L for taking out fan motor from water cooler of capacity 40/40 ltrs or 40/80 ltrs and replace with new fan motor complete set as per existing size, model including testing complete all as specified and directed.

Supply and fixing in repair and replacement of submersible water pump for desert cooler as per sample approved complete all as specified and directed. (Model SX-8) Make - Bansal.

Supply and fixing in repair and replacement of refrigerator starting Relay/ OLP as per existing size and model complete all as specified and as directed. Make: Danfoss or equivalent as approved complete all as specified and directed.

Supply and fixing in repair and replacement of Refrigerator Thermostat (Single Door) as per existing size and model complete all as specified and as directed.

Supply and fixing in repair and replacement of Refrigerator door lock as per existing size and model complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator Ice try as per existing size and model for any capacity of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator screw / pin type bulb as per existing size and model complete for any cap of refrigerator all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator door switch as per existing size and model for any cap of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator door gasket of magnetic strip as per existing size and model for any cap of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator bottle guard as per existing size and model for any cap of refrigerator (Single door) complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator bottle guard as per existing size and model for any cap of refrigerator (double door) complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator Vegetable Basket as per existing size and model for any cap of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator door handle as per existing size and model for any cap of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of refrigerator freezer door as per existing size and model for any cap of refrigerator complete all as specified and as directed.

Supply and fixing in repair and replacement of relay for air conditioner window/split type of any capacity as per existing size and model complete all as specified and as directed.

Supply and fixing in repair and replacement of thermostat for air conditioner window/split type of any capacity as per existing size and model complete all as specified and as directed.

S&F for replacement of suitable starting relay cum over load (box type) for water cooler as per sample approved complete all as specified and directed.

M&L for taking out exhaust air changer (fan motor) from desert cooler at store yard / site, rewinding with copper wire of existing gauge for three speed & varnishing, heating complete of rewinding and refixing in same positing including testing complete all as specified and directed.

M&L for preparation of existing external and internal surface of desert cooler body and applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour with spray machine painting complete all as specified and as directed.

S&F in repair and replacement of Capacitor 2.5 to 3 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 4 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 6 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 8 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 36-50 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 100/120 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Capacitor 120/150 MFD 240 volts AC complete all as specified and as directed.

S&F in repair and replacement of Printed Circuit Board (PCB) with remote control and all other accessories suitable for window type air conditioner complete all as specified and as directed.

S&F in repair and replacement of Printed Circuit Board (PCB) with remote control and all other accessories suitable for Split type air conditioner complete all as specified and as directed.

Supply and fixing in repair and replacement of front grill complete set suitable for air conditioner window type of any capacity complete all as specified and as directed..

Supply and fixing in repair and replacement of fan blade for air conditioner window/split type of any capacity as per existing size and model complete all as specified and as directed.

Supply and fixing in repair and replacement of air conditioner drain pipe window/split type of any capacity as per existing size and model complete all as specified and as directed.

Supply and fixing in repair and replacement of remote control assembly for air conditioner window/split type of any capacity as per existing size and model complete all as specified and as directed.

Supply and filling of poly alky line glycol (PAG) synthetic compressor oil ND-8 after draining & drying existing compressor oil including testing complete all as specified and directed.

Supply and Charging of fresh Gas R-22 including testing complete all as specified and directed.

Supply and Charging of fresh Gas R-134 including testing complete all as specified and directed.

Supply, fixing and clamping jointing of copper tubing of size 15 mm for suction line and for liquid discharge line including making hole in wall for passing through and making good the disturbed surface omplete all as specified and as directed.

Supply, fixing and clamping jointing of copper tubing of size 12 mm for suction line and for liquid discharge line including making hole in wall for passing through and making good the disturbed surface omplete all as specified and as directed.

Supply, fixing and clamping jointing of copper tubing of size 10 mm for suction line and for liquid discharge line including making hole in wall for passing through and making good the disturbed surface omplete all as specified and as directed.

Supply and fixing insulation foam material suitable for A/C copper pipe omplete all as specified and as directed.

Supply and fixing wall bracket duly painted for fixing outdoor unit of split type A/C including suitable anchor fastner nuts bolts and washer for fixing bracket complete all as specified and as directed.

S&F in repair and replacement of non return valve for air conditioner window type of any capacity complete all as specified and as directed..

S&F in repair and replacement of dry filter for air conditioner window/split type of any capacity as per existing size and model complete all as specified and as directed.

S&F in repair and replacement of dry filter for refrigerator of any capacity as per existing size and model complete all as specified and as directed.

M&L for repair and replacement of main burnt transformer of 4/5 KVA capacity stabilizer with copper winding, wiring and testing complete all as specifed and as directed.

M&L for repair and replacement of main burnt transformer of 2/3 KVA capacity stabilizer with copper winding, wiring and testing complete all as specifed and as directed.

M&L for repair and replacement of main burnt transformer of 01 KVA capacity stabilizer with copper winding, wiring and testing complete all as specifed and as directed.

M&L for repair and replacement of main burnt transformer of 0.5 KVA capacity stabilizer with copper winding, wiring and testing complete all as specifed and as directed.

M&L for repair/repalacement defective parts (i.e. relay, electronic circuit plate, 9-0-9 Transformer, fuse MCB, Voltmeter, LED, wiring etc) of stablizer capacity 0.5 / 1.0 KVA and testing complete all as specified and directed.

M&L for repair/repalacement defective parts (i.e. relay, electronic circuit plate, 9-0-9 V/ 12-0-12 V Transformer, fuse MCB, Voltmeter, LED, wiring etc) of stablizer capacity 2.0 / 3.0 KVA and testing complete all as specified and directed.

M&L for repair/repalacement defective parts (i.e. relay, electronic circuit plate, 9-0-9 V / 12-0-12 V Transformer, fuse MCB, Voltmeter, LED, wiring etc) of stablizer capacity 5.0 KVA and testing complete all as specified and directed.

S&F long nose PVC push cock as per sample approved complete all as specified and directed.

S&F flexible pipe for drainage of size 3 / 4" as per sample approved complete all as specified and directed.

S&F PVC flexible pipe size 15 mm dia of medium grade as per sample approved complete all as specified and directed complete all as specified and directed.

S&F elbows & distributor (Plastic set of 4) of desert cooler as per sample approved complete all as specified and directed.

S&F suitable size of filter pad (Khas) for desert cooler of any size (set of three) as per sample approved complete all as specified and directed.

S&F in replacement of side panel of desert cooler made out of 24 SWG GI Sheet complete all as specified and directed.

S&F in replacement of water tank depth of minimum 250 mm of desert cooler made out of 24 SWG GI Sheet complete all as specified and directed.

S&F in replacement of top panel of desert cooler made out of 24 SWG GI Sheet complete all as specified and directed.

S&F in replacement of front panel of desert cooler made out of 24 SWG GI Sheet complete all as specified and directed.

S&F of plastic grill of suitable size of existing plastic grill including nuts & bolts etc for desert cooler as per sample approved complete all as specified and directed.

S&F heavy duty rotary switch (4 terminals) complete (rated 15 Amps) for desert cooler (ISI mark) as per sample approved complete all as specified and directed.

S&F two pin metal plug top for AC as per sample approved complete all as specified and directed.

S&F Single pole and neutral link enclosure with two pin and earth plug and socket complete with one single pole MCB of 240 V 32 Amps complete all as specified and directed.

S&F voltmeter (0-300 V) of existing size of make rex or equivalent for 5 / 3 / 2 / 1 /0.5 KVA stabilizer complete all as directed.

S&F HT connector (Heavy duty) of 3 terminal for 5 KVA stabilizer as per sample approved complete all as specified and directed.

S&F time delay relay (TDR) electronic circuit plate (make Tycon or equivalent) for 5 / 3 / 2 / 1 / 0.5 KVA stablizer complete all as directed.

S&F lamp LED indicator (RYB) incuding holder ans resistance as per sample approved

S&F Transformer (9-0-9 Volt or 12-0-12 Volt) capacity 500 Milli Amps (make Monex/deluxe or equivalent) complete as directed.

S&F relay capacity 25 amps Make Dummac for 3.0 / 5.0 KVA stabilizer complete all as directed.

S&F relay capacity 5 amps (Make Dummac) for 1 / 0.5 KVA stabilizer complete all as directed.

S&F electronic circuit plate of 130 V & 1 / 4 watt resistance for 0.5 / 1.0 KVA stablizer complete all as specified and directed.

S&F electronic circuit plate of 130 V & 1 / 2 watt resistance for 5 / 3 / 2 KVA stablizer complete all as specified and directed.

S&F fuse with holder as per sample of capacity 10 / 15 Amps as per sample approved complete all as specified and directed.

S&F 3 pin 15 Amps plug top complete all as specified and directed.

S&F 3 pin 5 Amps plug top complete all as specified and directed.

S&F ball brass valve bore dia 15 mm high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking out of Split type any capacity from existing position & refitting to the other position including removing Transportation & testing including making good the existing surface complete all as directed and specified.

S&F plywood 3mm thick cut to shape, size & fix to the sides of window type AC's closed the opening of AC's complete all as directed and specified.

Demolition of brick wall for opening of walls for fixing of window type AC including making good to the disturded surfaces etc complete all as directed and specified.

VAISHNAVI CONSTRUCTION

M/S Priya Trading Agency

M/s KUMAR ENTERPRISES