Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.7 Cr
EMD Value
₹5.5 L
Closing Date
31 Aug 2023, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
EXECUTIVE ENGINEER
MVS INVILLAGE
RWSSD/2023-24/WS/WORK_INDENT2248
RWSSD/2023-24/WS/WORK_INDENT2248
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Karwar
8 documents required · 8 mandatory
MANDATING SATISFACTORY COMPLETION AS A PRIME CONTRACTOR FOR AT LEAST ONE SIMILAR NATURE WORK TO AN EXTENT OF 50% OF THE COST OF THE WORK, RS.183.60 LAKHS IN LAST 5 YEARS (2018-19 to 2022-23)
TENDERER MUST HAVE COMPLETED PHYSICAL WORK DONE AS PRESCRIBED IN BID DOCUMENT FORMAT 3.2C IN LAST 5 YEARS (2018-19 to 2022-23)
ACCURATE POSTAL ADDRESS AND PHONE / MOBILE NUMBER
THE TENDERER SHOULD POSSESS VALID GST REGISTRATION
PAN CARD COPY
THE TENDERER SHOULD POSSESS VALID REGISTRATION OF APPROPRIATE CLASS WITH PWD DEPARTMENT AS PER TENDER CONDITION
TENDERER MUST HAVE ASSESSED AVAILABLE TENDER CAPACITY AS PER FORMULA IN SECTION 3.6 IN LAST 5 YEARS (2018-19 to 2022-23)
The contractor own or hire required machinery equipments for successful completion of work (at least owning 50% and 50% on Rent) (i) Excavator - 02 no (ii) Concrete mixer - 02 no (iii)Tipper-02 no (iv)Concrete vibrator-02no (v) Water tanker -02 no
PROFIT & LOSS ACCOUNT FROM CHARTERED ACCOUNTANT FOR LAST FIVE YEARS (2018-19 to 2022-23) TENDERER MUST HAVE ACHIEVED IN AT LEAST TWO FINANCIAL YEARS A MINIMUM FINANCIAL TURN OVER(IN ALL CLASSES OF CIVIL ENGINEERING CONSTRUCTION WORKS ONLY) OF RS. 734.42 LAKHS PER FINANCIAL YEAR (USUALLY NOT LESS THAN TWO TIMES THE ESTIMATED COST UNDER THIS CONTRACT )
THE TENDERER MUST SUBMIT LIQUID ASSETS AND /OR AVAILABILITY OF CREDIT FACILITIES OF NO LESS THAN RS.157.37 LAKHS (CREDIT LINES/ LETTER OF CREDIT/ CERTIFICATES FROM BANKS FOR MEETING THE FUND REQUIREMENT ETC. (USUALLY THE EQUIVALENT OF THE ESTIMATED CASH FLOW FOR THREE MONTHS IN THE PEAK CONSTRUCTION PERIOD)
EXECUTED IN ANY ONE YEAR IN LAST 5 YEARS (2018-19 to 2022-23), THE FOLLOWING MINIMUM QUANTITIES OF WORK: GI/CI/PVC/MS/DI/HDPE-PIPELINE 30163.8 METER CONCRETE 527.48 CUM EARTHWORK 10650 CUM
THE TENDERER MUST SUBMIT ONGOING WORK COMMITMENTS (CERTIFIED BY AN OFFICER NOT BELOW THE RANK OF EXECUTIVE ENGINEER) TO COMPUTE AVAILABLE TENDER CAPACITY IN LAST 5 YEARS (2018-19 to 2022-23)
NOT APPLICABLE
NOT APPLICABLE
NOT APPLICABLE
₹5,000
₹5.5 L
23 Aug 2023
23 Aug 2023
1 Sept 2023
29 Aug 2023
28 Aug 2023
Pumphouse - 2Nos
PART-A -AUGUMENTATION SUB ESTIMATE-2 PUMP HOUSE: Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, fou...
P&L PCC 1:1.5:3 (20mm aggregates) in foundations incld. shutter, compaction, curing etc,The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...
PUMPING MACHINERY ZONE 3
PART-A -AUGUMENTATION SUB ESTIMATE-3 Pumping MC ZONE-3: Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impe...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4m...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm as per specification,design and drawings in...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including cost of a...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including co...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. as per specifi...
Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
PART-A -AUGUMENTATION SUB ESTIMATE-6 RISING MAIN : Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and ...
Providing Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any as per specification,design and drawings including cost of all material, labour charges and hirecharges o...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
75 MM ELECTRO FUSION COUPLER as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the En...
75 MM ELECTRO FUSION ELBOW as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 65 MM GI COLLAR as per specification,design and drawings including cost of a...
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any 65 mm dia GI bend . as per specification,design and drawings includin...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with Murrum. as per specification,desi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Cutting in Asphalt Road Surfa...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classificationCutting in C.C Road Surface a...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over apreparedsub base, with 43 grade cement or any othertype as per Clause 1501.2.2 M20 (Grade), coar...
Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...
PUMPING MACHINERY ZONE4
PART-A -AUGUMENTATION SUB ESTIMATE-4 Pumping MC ZONE-4: Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impe...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4m...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm as per specification,design and drawings in...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including cost of a...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including co...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. as per specifi...
Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
PART-A -AUGUMENTATION SUB ESTIMATE-7 DISINFECTION UNIT 3 No : Supply, delivery, erection and commissioning of following capacity of micro processor based water disinfection equipment using Silver Ion...
PART-A -AUGUMENTATION SUB ESTIMATE-8 CONSTRUCTION OF 10 KL OHT 9.0 M STAGING (ZONE-2) Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft,...
Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...
Providing and laying in position plain cement concrete PCC 1:2:4 using 40 mm aggregate for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fi...
Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick conc...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Providing CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S CIRCLE KLB SR 2019-20 Pg.No.317 It.No.15...
Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S CIRCLE KLB SR 2019-20 Pg.No...
Providing Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S CIRCLE KLB SR 2019-20 Pg.No. 318 It.No.1...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materi...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, as per specification,design and ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
PART-A -AUGUMENTATION SUB ESTIMATE-9 CONSTRUCTION OF 50 KL OHT 9.0 M STAGING ( ZONE-3 ) :Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe i...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm dia (outlet) as per specification,design...
Providing Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm dia (Inlet,over flow ,scour,and bypass) ...
Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm dia (Inlet,over flow) as pe...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...
Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
Providing and laying in position plain cement concrete PCC 1:2:4 using 40 mm aggregate for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating EACH deposited layer by r...
Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick conc...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam below ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel einforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent m...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...
Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete PCC 1:2:4 using 40 mm aggregate for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fi...
Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick conc...
Providing and laying in position Reinforced cement concrete for Spiral Staircase over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates a...
Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade.
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. as per specification,design and ...
Rehabilation 50kl oht 3nos.
PART-A -AUGUMENTATION SUB ESTIMATE-10 REHABILITATION TO E- 50 KL ELSR 3 No : Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth fin...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per specification,design and dr...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Rehabilation 100kl oht 2nos.
PART-A -AUGUMENTATION SUB ESTIMATE-11 REHABILITATION TO E- 100 KL ELSR 2 No Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth fini...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per specification,design and dr...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
PART-B SUB ESTIMATE-19 HTC: Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. ...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter with special flange, compression type fittings, wa...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and all lead and ...
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost o...
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...
Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...
Flow control valve 5LPM/10 LPM/15 LPM; Providing and fixing Flow control valve using food grade materials SS 316 ball/1/2"(15 mm ) including cost of all materials ,labour charges,HOM and testing as pe...
Providing and fixing electrofusion Saddle comply with BS EN 12201-3:2011,PN-12.5 rating and Food grade raw material as per BS 6920 with Material of construction PE 80 or 100 and colour of fitting -...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost of all material, la...
Supply and installation of Best quality Brass BIB cock. 15 mm dia. as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lea...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and all lead and ...
Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...
Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Com-VoIII-II SR/I.No8.10/Pg.no.56)
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
PART-B SUB ESTIMATE-12 DISTRIBUTION NETWORK : Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of gra...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing of ELECTRO FUSION COUPLER 140,160,180 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and ...
Providing and fixing of ELECTRO FUSION COUPLER 110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as ...
Providing and fixing of ELECTRO FUSION COUPLER 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...
Providing and fixing of ELECTRO FUSION COUPLER 75 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...
Providing and fixing of ELECTRO FUSION COUPLER 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...
Providing and fixing of ELECTRO FUSION TEE 125MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...
Providing and fixing of ELECTRO FUSION TEE 110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direc...
Providing and fixing of ELECTRO FUSION TEE 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...
Providing and fixing of ELECTRO FUSION TEE 75 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...
Providing and fixing of ELECTRO FUSION TEE 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...
Providing and fixing of ELECTRO FUSION ELBOW 125 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...
Providing and fixing of ELECTRO FUSION ELBOW 110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...
Providing and fixing of ELECTRO FUSION ELBOW 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as dir...
Providing and fixing of ELECTRO FUSION ELBOW 75 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as dir...
Providing and fixing of ELECTRO FUSION ELBOW 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as dir...
EF End cap kit PE 100 SDR11 PN16 D 63 as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the E...
Providing and fixing of ELECTRO FUSION Reducer .90 X75 MM ELECTRO FUSION REDUCERas per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries...
Providing and fixing of ELECTRO FUSION Reducer .90X63 MM ELECTRO FUSION REDUCERas per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries ...
Providing and fixing of ELECTRO FUSION Reducer 75X63 MM ELECTRO FUSION REDUCERas per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries wi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any 65 mm . as per specification,design and drawings including cost of all mater...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any.80 mm as per specification,design and drawings including cost of all materi...
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.65 mm s per specification,design and drawings including cost of all m...
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.80 mm s per specification,design and drawings including cost of all m...
BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...
BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...
BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with Murrum. as per specification,desi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and all lead and ...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Cutting in Asphalt Road Surfa...
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Cutting in CC Road Surface as...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...
PART-B SUB ESTIMATE-13 CONSTRUCTION OF VALVE CHAMBER : Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenche...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent ...
PART-B SUB ESTIMATE-14 CONSTRUCTION OF THRUST BLOCK : Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches...
Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent ...
PART-A -AUGUMENTATION SUB ESTIMATE-1 BORE WELL : Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burde...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
PUMPING MACHINERY ZONE1
PART-A -AUGUMENTATION SUB ESTIMATE-5 Pumping MC (SANNABASALAE ) :Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bo...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4m...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm as per specification,design and drawings in...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including cost of a...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including co...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. as per specifi...
Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
PART-B SUB ESTIMATE-15 Mecdam :Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classificatio...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter with special flange, compression type fittings, wa...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and all lead and ...
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost o...
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...
Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...
Flow control valve 5LPM/10 LPM/15 LPM; Providing and fixing Flow control valve using food grade materials SS 316 ball/1/2"(15 mm ) including cost of all materials ,labour charges,HOM and testing as pe...
Providing and fixing electrofusion Saddle comply with BS EN 12201-3:2011,PN-12.5 rating and Food grade raw material as per BS 6920 with Material of construction PE 80 or 100 and colour of fitting -...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost of all material, la...
Supply and installation of Best quality Brass BIB cock. 15 mm dia. as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lea...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with all lead and lift. as per specificat...
Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...
Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Com-VoIII-II SR/I.No8.10/Pg.no.56)
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
PART-B SUB ESTIMATE-16 BT: Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. a...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter with special flange, compression type fittings, wa...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with all lead and liftIncluding cost of a...
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost o...
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...
Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...
Flow control valve 5LPM/10 LPM/15 LPM; Providing and fixing Flow control valve using food grade materials SS 316 ball/1/2"(15 mm ) including cost of all materials ,labour charges,HOM and testing as pe...
Providing and fixing electrofusion Saddle comply with BS EN 12201-3:2011,PN-12.5 rating and Food grade raw material as per BS 6920 with Material of construction PE 80 or 100 and colour of fitting -...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost of all material, la...
Supply and installation of Best quality Brass BIB cock. 15 mm dia. as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lea...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any othertype as per Clause 1501.2.2 M20 (Grade), coar...
Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...
Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Com-VoIII-II SR/I.No8.10/Pg.no.56)
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
PART-B SUB ESTIMATE-17 cc: Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. a...
Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter with special flange, compression type fittings, wa...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and all lead and ...
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost o...
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...
Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...
Flow control valve 5LPM/10 LPM/15 LPM; Providing and fixing Flow control valve using food grade materials SS 316 ball/1/2"(15 mm ) including cost of all materials ,labour charges,HOM and testing as pe...
Providing and fixing electrofusion Saddle comply with BS EN 12201-3:2011,PN-12.5 rating and Food grade raw material as per BS 6920 with Material of construction PE 80 or 100 and colour of fitting -...
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost of all material, la...
Supply and installation of Best quality Brass BIB cock. 15 mm dia. as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lea...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any othertype as per Clause 1501.2.2 M20 (Grade), coar...
Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...
Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Com-VoIII-II SR/I.No8.10/Pg.no.56)
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...
PART-B SUB ESTIMATE-18 MDPE: Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wh...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw4 2248.docx
Tender Document • 0.36 MB
LOC.docx
Others - LOC • 0.01 MB
1 crore Above Notification.docx
Others - TENDER NOTIFICATION • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .