WBPWD/SEWEC /BED /NIQ-99 /2024-25-2nd Call

Amount

A. SPNDB, TPNDB, VTPNDB, MCB, MCB Isolator, MCCB etc.: Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make:- Legrand/L&T/Schneider) [Ref.:- D-9/13]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make:- Legrand/L&T/Schneider) [Ref.:- D-10/14]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand/L&T/Schneider) [Ref.:- D-5/6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make: Legrand/L&T/Schneider) [Ref.:- D-6/7]

40A DP (SPN)

63A FP (TPN)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. [Ref.:- D-9/11]

B. LT Cable, Laying, Compression Glands, Finishing cable ends, Cable Joint etc.: Supply of following size 1.1 kV (1100V) grade, XLPE/PVC insulated, Armoured Al. LT cable. (Make:- RR Kabel/PolyCab / Gloster /KEI) [Ref.: N.S.]

2 Core 6 Sqmm

4 Core 10 Sqmm

4 Core 35 Sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [Ref.: F-1/2(a)]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [Ref.:- F-1/2(b)]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [Ref.:- F-1/2(c)]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. [Ref.:- F-3/5(i)]

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [Ref.:- F-4/7(a)(c)]

For 2 Core 6 Sqmm

For 4 Core 10 Sqmm

For 4 Core upto 35 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. [Ref.:- F-5/8(b)]

For 2 Core 6 Sqmm

For 4 Core 10 Sqmm

For 4 Core upto 35 Sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:- RR Kabel/ Polycab/ Gloster/KEI) in 20/25/32 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [Ref.- E-14/1(a)]

2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [Ref.: F-5/9]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:-RR Kabel/PolyCab/ Havells/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points/240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Make:- Anchor/ Havells) fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching color) top cover 3 mm thick and incl. 175mm x100mm x 65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. [Ref.:- E-14/2 & E-15/4(a)]

On Board.

Average run 6 mtr.

Average run 8 mtr.

Average run 10 mtr.

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex /coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [Ref.:- E-3/10]

175 mm x 100 mm x 65 mm

240 mm x 200 mm x 65 mm

300 mm x 200 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required. [Ref.:- E-4/12]

175 mm x 100 mm x 65 mm

240 mm x 200 mm x 65 mm

300 mm x 200 mm x 65 mm

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Make:- Anchor/ Havells/Crabtree) on sheet metal switch board embedded in wall/ fixed on wall incl. S&F 175x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Ref.:- E-4/11(c) + E-5/13(c),14(a),15(a)]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make:- Anchor/ Havells/Crabtree) on sheet metal switch board embedded in wall incl. S&F 240x200x 65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Ref.:- E-7/26]

Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make:- Anchor/ Havells) on sheet metal switch board embedded in wall incl. S & F 240x200x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Ref.- E-7/28]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. [Ref.- E-6/22]

Supply & Fixing 240 V, 2 nos. 16/20A, plug socket with separate 2 nos. 16/20A Piano key type switch, (Make:- Anchor/ Havells/Crabtree) on sheet metal switch board embedded in wall/ fixed on wall incl. S&F 240mmx200mmx65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Ref : E-4/11(e) + E-5/13(e),14(b), 15(b)]

Supply & Fixing 240 V, 1 no. 16A, & 1 no. 6A plug socket with separate 1 no. 16 A & 1 no. 6A Piano key type switch (Make:- Anchor/ Havells/Crabtree) on sheet metal switch board embedded in wall incl. S&F 200x150x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Ref : E-4/11(d) + E-5/13(d),14(a)(b),15(a) (b)]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (Make:- Legrand/ Crabtee/ Anchor/ Havells) [Ref.:- E-17/1]

6 Module

2 Row 12 Module

2 Row 18 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [Ref.:- E-17/2]

2 Module

4 Module

Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket (Make:- Legrand, Model- Arteor or Myrius/ Anchor, Model- Woods/ Havells, Model- Oro Series) with 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. incl. S&F switch board and top cover plate complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and housing the board after cutting the brick wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc., painting and mending good damages to building works. [Ref.:- E-17/1(b) +3(a) + 4(a)]

Supply & Fixing 240 V, 3 nos. 6 A, & 1 no. 16A 3 pin Modular type plug socket with 3 nos. 6A & 1 no. 16A Modular type switch (Make:- Legrand, Model- Arteor or Myrius/ Anchor, Model- Woods/ Havells, Model- Oro Series), 25A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and top cover plate complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and housing the board after cutting the brick wall incl. making necy. connections with PVC Cu wire and earth continuity wire etc., painting and mending good damages to building works. [Ref.:- E-17/1(f)+3(a)(b)+4(a)(b)+E-19/19(a)+K-2/100]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make:- Legrand, Model- Arteor or Myrius/ Anchor, Model- Woods/ Havells, Model- Oro Seriese) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [Ref.- E-18/9(b)]

S&F of Blank Plate for modular box. [Ref.- K-2/99]

D. Outdoor/Compound Lighting : Supply of 240V,1-Ph.,50Hz LED street light delivering minimum 110 lumen/watt including IP66 & 10kV Surge Protection Device and complete with all accessories (5 years warranty). [Ref.:- N.S.]

60/70W [Make:- Philips Smart Bright Essential, Cat No.- BRP032 P LED75 CW SLR PSU GR SPD or Cromptom Raptor Neo, Cat No.- TRP-409-60-57-SL-GL-NSG/Wipro]

S&D of 240V,1-Ph.,50Hz, LED flood light delivering minimum 120 lumen/watt including IP66 & 10kV Surge Protection Device and complete with all accessories (5 years warranty). [Ref.:- N.S.]

150W [Make:- Philips Field Star, Cat No.- BVP283 LED181 CW FG SY5WB 150W SPD V1 or Cromptom Pluto Neo Aura, Cat No.- TFS-507-150-57-NL-SL-GL-NSG/Wipro]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [Ref.:- C-3/18]

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required. [Ref : C-3/20(b)]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on wall of the building, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. [Ref : H-5/5]

E. Indoor Lighting S&F of 240V,1 Ph.,50 Hz, 4' (feet) long LED T8 Tube light (Polycarbonate Body) having efficacy of >=100 lumen/watt. [Make:- Philips, Cat No.- Mas LED Tube 1200mm 18W 865 T8 I – 2100lm] (3 years warranty)./Crompton/Wipro. [Ref.:- N.S.]

S&F of 240V,1-Ph.,50Hz, 4' (feet) long Single LED T8 Tube light batten fitting [Make:- Philips, Batten Cat No.- TMC 502 1xT-LED 22W or Crompton ECO-I, Batten Cat. No.- IGP161LT8-16 1 x T8] with end cap and complete with all accessories (3 years warranty)/Crompton/Wipro. . [Ref.:- N.S.]

S&F of 240V,1-Ph.,50Hz, 4' (feet) long Twin LED T8 Tube light batten fitting [Make:- Philips, Batten Cat No.- TMC 502 2xT-LED 22W or Crompton ECO-I, Batten Cat. No.- IGP162 LT8-16 2 x T8] with end cap and complete with all accessories (3 years warranty)/Crompton/Wipro. [Ref.:- N.S.]

S&F of 240V,1-Ph.,50Hz 18W White colour LED Bulb (Make:- Philips / Crompton/Wipro) [Ref.:- N.S.]

S&F of 240V,1-Ph.,50Hz Bulk head light fitting. (Make:- Havells/Philips / Crompton) [Ref.:- K-1/29]

S&F of Angular batten holder for fixing of LED Bulb. (Make:- Anchor) [Ref.:- K-1/28]

S&F of round shape Ceiling Rose. [Ref.:- K-2/69]

S&F of LED tube light rotary holder incl. all fixing accessories. [Ref.:- N.S.]

S&F of 240V,1-Ph.,50Hz, fully diffused recessed mounted 2'X2' LED light with high transmitive diffuser and complete with all accessories for indoor spaces. [Make:- Philips Full Glow G5, Cat No.- RC380B LED36S-6500 G5 L60W60 PSU OD or Crompton POLARIS NIO-I, Cat No.- LCTLRNE-36-FO-CDL] (3 years warranty). [Ref.:- N.S.]/ Wipro (With 3 Yeras Warrenty)

F. Ceiling Fan, Exhaust Fan, Air-Circular Fan etc.: Supply of 240V,1-Ph., 48" (1200mm) sweep, high speed AC ceiling fan, the capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan. including safety wire and complete with all accessories like blades, canopy, fork, rubber bush, downrod etc. (Make:- Crompton Riviera Hi Speed/ Orient-Quassar/ CG Aura metallic/ Usha) (Colour:- Brown/ Metallic Ivory Cherry) (3 years warranty). [Ref.:- N.S.]

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [Ref.:- D-14/29]

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [Ref.:- D-14/30]

S&F G.I. Ceiling Fan down rod (14 SWG) Incl. Painting the rod for extra suspension from ceiling. [Ref.:- N.S.]

S&F of 240V,1-Ph. Piano key socket type (4-step) electronic fan regulator. [Make:- Anchor] [Ref.:- K-2/84]

S&F of 240V,1-Ph. Modular Soket type (4-step) 2 module fan regulator. [Make:- Anchor/ Crabtee /Legrand] [Ref.:- K-3/107]

S&F of 240V,1-Ph.,50 Hz, 2.5mfd, P-2 type burst proof full metal body capacitor incl. connectors. (Make:- Tibcon) [Ref.:- N.S.]

S&F of standard quality Shackle Clamp Kit incl. good quality rubber insulator, nut-bolt set, split pin, washer etc. for Ceiling Fan. [Ref.:- N.S.]

Supply of 240V,1-Ph.,50Hz, full metal body with metal blades heavy duty AC Exhaust Fan complete with all accessories (3 years warranty). [Make:- Crompton/ EPC/ Usha/ Orient] [Ref.:- N.S.]

9'' (23cm or 230mm) [1370RPM]

12'' (30cm or 300mm) [1420RPM]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [Ref.:- C-4/28]

9'' (23cm or 230mm)

12'' (30cm or 300mm)

Supply & Fixing Al. louver shutter for the exhaust fan on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [Ref.:- D-14/32(a)]

9'' (23cm or 230mm)

12'' (30cm or 300mm)

Supply of 240V,1-Ph.,50Hz full metal body with 4 nos. metal blades Wall Bracket Type Heavy Duty Air-Circulator Fan with regulator and complete with all accessories (3 years warranty). [Make:- Crompton/Usha/EPC] [Ref.:- N.S.]

18'' (45cm or 450mm) [85Watt, 1420RPM]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [Ref.:- C-4/29]

S&F of 240V,1-Ph.,50Hz full metal body with 4 nos. metal blades Pedestal Type Heavy Duty Air-Circulator Fan with regulator and complete with all accessories. [Make:- Crompton/ Usha/ EPC] [Ref.:- N.S.]

18'' (45cm or 450mm) [85Watt, 1420RPM]

Repairing and Servicing of AC ceiling fans as required. [Ref.:- N.S.]: Lowering and refixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. making necessary disconnection and connection as required after necessary work.

Openning the fan body part by part overhauling greasing etc.

Changing the ball bearing as requireda(Make:- Tata/SKF-6201,6202,6203)

S&F 2.5mfd P-2 type (metal body) burst proof capacitor incl. necy. connectors as required (Make:- Universal/Tibcon)

S&F condenser clamp.

Clearing & Washing the fans by soap and solution incl. blade canopy etc.

Supply & change the jump nuts & set screw.

Supply & fixing rubber insulator.

S&F MS Shaft against defective once of ceilling fans incl. polishing by lather,motor proper fitting in the bush as required size.

Changing the loop wire starting and running coil incl soldering and also heat vernishing etc.

Supply and fixing new 3 split pin.

Rewindimng the burnt out fans openning part by part supplying supper minalex copper wire mica sheet changing the loop,heat,varnishing,copper wire etc.

Carrying charge for bunt out fans from site to work shop and return back.

G. Miscellaneous : S&D of 240V,1-Ph.,50Hz, 5/6A Piano key type Switch [Make:- Anchor] [Ref.:- K-2/77]/Crabtree/Legrand

S&D of 240V,1-Ph.,50Hz, 16/20A Piano key type Switch [Make:- Anchor] [Ref.:- K-2/79] /Crabtree/Legrand

S&D of 240V,1-Ph.,50Hz, 5/6A Piano key flush type 3 pin Plug Socket Switch [Make:- Anchor] [Ref.:- K-2/82]//Crabtree/Legrand

S&D of 240V,1-Ph.,50Hz, 16/20A Piano key flush type 3 pin Plug Socket [Make:- Anchor] [Ref.:- K-2/83]/Crabtree/Legrand

S&D of 240V,1-Ph.,50Hz, 6A Modular type Switch [Make:- Anchor/ Crabtee /Legrand] [Ref.:- K-3/101]

S&D of 240V,1-Ph.,50Hz, 16A Modular type Switch [Make:- Anchor/ Crabtee /Legrand] [Ref.:- K-3/102]

S&D of 240V,1-Ph.,50Hz, 6A Modular type 5 pin Plug Socket [Make:- Anchor/ Crabtee /Legrand] [Ref.:- K-3/103]

S&D of 240V,1-Ph.,50Hz, 16A Modular type 6 pin Plug Socket [Make:- Anchor/ Crabtee /Legrand/Cabtree] [Ref.:- K-3/104]

S&D of 240V, 20/25A, 3 Pin Plug Top with indicator [Make:- Anchor/Havells/Crabtree] [Ref.:- K-3/113]

S&D of 240V,1-Ph.,50Hz, Piano key type Indicator [Make:- Anchor] [Ref.:- N.S.]/Crabtree /Havells

S&D of 240V,1-Ph.,50Hz, Modular type Indicator [Make:- Anchor] [Ref.:- K-2/100)/Crabtree /Havells

S&D of 240V,1-Ph.,50Hz, Piano key type 16A kit kat rewireable fuse. [Make:- Anchor/Crabtree/Legrand ] [Ref.:- K-2/85]

S&D of 240V,1-Ph.,50Hz, 20/25A Modular switch type SP MCB (C-Curve) [Make:- Crabtree/Havells/Legrand] [Ref.:- E-19/19(a)]

Supply & delivery of 24/0.20mm twin twisted tinned copper flexible wire. [Ref.:- K-2/76]

S&D of 240/415V DIN Type HRC Fuse Link. [Make:- L&T/Legrand/Crabtree] [Ref.:- N.S.]

S&D of 240/415 V following rating MCB Isolator. (Make: Legrand/L&T/Crabtree) [Ref.:- D-5/6]

S&D of 240/415 V following rating MCB of Breaking capacity 10kA & C characteristics. (Make: Legrand/L&T/Crabtree) [Ref.:- D-6/7]

S&D of 240V,1-Ph.,50Hz, 21A capacity OLP 3+ AC starter with multi-function display and protection features of Volt check, Amp check, Time check. [Make:- Electron] [Ref.:- N.S.]

S&D of 240V,50 Hz Analog Time Switch) [Ref.:- N.S.]

S&D of 240V,50 Hz, 25A 2P power contactor (Make:- L&T, MNX Type/ Legrand/Crabtree) [Ref.:- N.S.]

S&D of 1.1 kV graded, 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Gloster/Polycab/RR Kabel] [Ref.:- K-2/70&71]

1.5sq.mm, (Red- 90m, Black- 90m, Green- 90m)

2.5sq.mm. (Red- 90m, Black- 90m, Green- 90m)

S&D of good quality flexible PVC pipe (Spring Type). [Ref.:- N.S.]

S&D of 240V,50Hz, 1-ph superior type Ding-Dong Call Bell. (Make:- Anchor/Crabtree /legrand ) [Ref.:- K-1/23]

S&D of 240V,50Hz, 1-ph superior type Multitune Call Bell. (Make:- Anchor/Crabtree/legrand ) [Ref.:- K-1/25]

S&D of Godrej make Nav-tal 7 Levers Round Padlock with 4 Keys,Brass Finish Home Safety Door Lock, Colour- Gold (for all rooms of Sub-Station, DG Room, Each Floor Rising Main Door etc.) [Ref.:- N.S.]

S&D of good quality insulation tape (Red- 4, Black- 4, Green- 2, Blue- 1, Yellow- 1). [Ref.:- N.S.]

S&D 12 ft long mediun duty aluminium Step ladder with utility Tray & rubber gasket at 4 nos. legs as per direction of E.I.C. (Make -Liberti/ Alnico/ Pyramid/ Patel/Seasoned/Ripe) [Ref.:- N.S.]

D.D ELECTRICALS (BID ID -6397101)

DIP ELECTRICALS (BID ID -6395411)