Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance BIR SARDALIA RESIDENCY AIR FORCE ROAD BARYAL UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | Admitted-Finance |
| 5 | Admitted-Finance 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | Admitted-Finance |
Tender Value
₹98.8 L
EMD Value
₹1.7 L
Closing Date
29 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE (AF) Jammu
CWE (AF) Jammu, Near Gurdwara Sahib and Mandir, Airforce Station Satwari, Jammu. Pin - 180 003
PROVN OF COVERED PATHWAYS FROM MAIN ROAD TO STAGE-I AT AIR FORCE STN AT NATHATOP UNDER GE (AF) UDHAMPUR.
2023_MES_591239_2
CWEAFJ-04/2023-23
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Udhampur
As Per Tender Documents
9 documents required · 9 mandatory
₹1,000
GE (AF) Udhampur
₹1.7 L
Yes
3 Aug 2023
1 Jul 2023
31 Jul 2023
1 Jul 2023
29 Jul 2023
15 Jul 2023
Amount
B/R Portion
Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc., and getting out in hard / dense soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc., and getting out in hard rock / disintegrated rock complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Removing excavated materials (rock) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Brick work with sub class ‘B’ bricks, class designation 75, old size straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.
RCC M-30, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
RCC M-30, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.
RCC M-30, design mix in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Formwork to sides of concrete foundation, footings, plinth beam, bases of columns, rafts and raft beams and similar work; vertical or to batter for fair finished surfaces of concrete, complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.
TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.
TMT bars 5mm dia and over as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 using WPC on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified. Note: WPC shall be measured and paid separately under respective item.
Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
Supply only Liquid water proofing compound all as specified and as directed.
Hard core of broken stone or boulder gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and as directed.
PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations filling mass concrete, complete all as specified and as directed.
Use and waste of form work to the side of PCC steps including fair finish surfaces complete all as specified and as directed.
Precast cement concrete coloured interlocking paver block 60mm thick, M-35 grade, conforming to IS-15658 2006, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including joint and pointing with grey cement and pigment etc. complete all as specified and directed.
PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, kneelers, apex stones, bed plates, kerbs and like complete including necessary form work all as specified and as directed.
75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and fair including making joints with bitumnous gola with 80/25 bitumen filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 2.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.
Rolled Mild Steel section as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat ections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.
Mild steel Plates (plain or chequered) as per IS-3502 (Base IS-10748 Gr-II) square or rectangular cut or notched (ordinary and counter shunk) forming holes, without any attachment complete all as specified and as directed.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 11 to 16mm dia and length of bolt exceeding 15cm but not exceeding 22.5cm complete all as specified and directed.
Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Grade-B quality, with 275 Grams/Sqm zinc coating and complete, all as specified and as directed.
0.80mm thick plain, galvanised, mild steel sheeting (ISI marked) with minimum 275 Grams/Sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with 'L' type or 'J' type or cranked hooked bolts and washers complete, all as specified and as directed.
Small articles such as clamps, hold fasts, wall ties / wind ties, support of valley gutters, support or stays for rain water / ventilating pipes, including bolts if required etc. made of MS flat iron conforming to Fe-290 W (Gde E-165) complete all as specified and as directed.
Pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.
PCC 1:3:6 type C-O (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel door frames and in bed block for holdfast and similar works etc. complete all as specified and directed.
Factory made 35mm thick 2nd class hard wood plain framed pannelled shutter (two panels) with lock rail and pannel or 9mm BWP comerical ply or 12mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned complete all as specified and as directed.
Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.
Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.
300mm extruded aluminum sliding door bolts plate type cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum section alloy and fixed in any position complete all as specified and as directed.
Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe-290 grade E-165 quantity 'A', including bending, cutting and welding as required, complete all as specified and as directed.
Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork etccomplete all as specified and as directed.
Precast RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slab, chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and as directed.
Preparation of new plastered or previously untreated surfaces of walls and applying three coats of white wash complete all as specified.
Preparation of plastered or previously untreated surfaces of walls and applying two coats of cement based paint in camouflage pattern over a coat of primer (Shade as apporved by user), complete all as specified and directed.
Preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10cm width or girth in camouflage pattern after preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. complete all as specified and as directed.
Preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exceeding 10cms width or girth, including preparation of surfaces, complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide zinc chrome primer, complete all as specified and as directed.
Preparation of new or previously untreated steel surfaces of any description, not exceeding 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
E/M Portion
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit 20mm dia or more as per the site requirement including its fittings and fixtures such as ties, bends, elbows and junction boxes etc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point controlled by two Nos two way switches using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit 20mm dia or more as per the site requirement including its fittings and fixtures such as ties, bends, elbows and junction boxes etc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one 05 pin socket outlet 05/06 Amp on independent board using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box for mounting switches etc. including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
All as per the description of Serial Item No 51 here-in-before but for one 3 pin socket outlet 15/16 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.
Switch piano, flush type, 05/06 Amps, single pole, two way, complete all as specified and as directed.
Switch piano, flush type, 05/06 Amps, single pole, one way, complete all as specified and as directed.
Socket out let universal type, 2 in 1, 2 and 3 pin 05/06 Amp, piano flush type, 240 volts, complete all as specified and as directed.
Switch piano, flush type, 15/16 Amps, single pole, one way, complete all as specified and as directed.
Socket outlet universal type, 2 in 1, 3 pin 5 and 15/16 Amp, piano flush type, 240 volts, complete all as specified and as directed.
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.
Tube light fitting, batten type suitable for and including LED 20 tube Rod 4' long with decorative colour in aluminum housing and integrated electronic driver and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed.
Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.
MCB SP 6 to 32 Amp 10 KA, 'C' curve, complete all as specified and as directed.
MCB SPN 40 Amp 10 KA, 'C' curve, complete all as specified and as directed.
MCB TPN 63 Amp 63 KA 10 KA, 'C' curve, complete all as specified and as directed.
Distribution Board iron clad TPN DB, double door with IP-43, IK-09 protection, Four Way, vertical, suitable MCCB FP 415 Volts 125 Amps rating as incommer and MCB as outgoing complete with appropriate size copper busbar including cutting chases in walls for fixing the DB and making good disturbed surfaces of walls, complete all as specified and as directed. Note : MCBs / MCCBs shall be measured and paid separately under the respective item.
MCCB TP 415 Volts 125 Amps rating, 36 KA rupturing capacity Ics = 100% Icu with adjustable Thermal Magnetic trip release, complete all as specified and as directed.
Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 2.5 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 2.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Three runs of 2.5 Sqmm wire and one run of PVC conduit shall be considered as one unit length.
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundations, laying of cables, water supply pipes etc., and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 Sqmm 3.5 core including taking down/up old unserviceable cable and making good disturbed surfaces, complete all as specified and directed.
XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core including taking down/up old unserviceable cable and making good disturbed surfaces, complete all as specified and directed.
Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.
Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed.
Galvanized iron water tubing, light grade, 80mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed.
Galvanized iron water tubing, light grade, 40mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed.
Steel Tubular swaged poles type 410 SP-31 (9.0 mtr long) conforming to IS : 2713 Part-I to III 1980, complete with 6 mm thick cast iron base plate, finial taper plug, MS bolts, nuts, screws including painting 06 Nos bands / strips of 30cms each starting from the bottom of the pole (i.e above the PCC coping) with white and red post office box colour in alternate strips and two coats epoxy based paint aluminium grade finish to the remaining external surface over one coat of primer and numbering of poles with black synthetic enamel paint in 2.5 cm height including black bitumineous paint two coats on steel surface embedded in concrete foundation all as specified and as directed.
LED Street Light Fitting 230 Volts AC Outdoor type 70 Watts with high pressure diecast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection & two wire conection as per suitable fitting complete all as specified and as directed.
LT Panel Outdoor type cubical floor mounted type made out 3.15mm thick CRCA Sheet IP 65 duly powder coated complete bus bar 250 Amps rating made of Aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for Three Phase Four Wire 415 volts 50Hz power suply system suitable for and including the following :-
(a) MCCB 415 Volts 200Amps 4 Pole with Reputing capacity 36 KA Microprocessor based for over load short circuit protation : 01 Nos incoming (b) MCCB 415 Volts 100 Amps 4 Pole with Reputing capacity 36 KA Microprocessor based for over load short circuit protation : 01 Nos (c) MCCB 415 Volts 63 Amps 4 Pole with Reputing capacity 36KA Microprocessor based for over load short circuit protation : 01 Nos (d) All acessories prewired with suitable size copper conductor cable/strip and suitable foundation as per manufacturers remcomendation. (e) Indicator Set RYB 01 Set 03 LED type.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.
Earth continuity conductor or main earthing lead fixed to wall on batten or recesses or chases or buried in ground or drawn in conduit/pipe orfixed to poles or any other indicatedsituation for loop earthing etc. as required 2mm dia galvanised iron or steel wire complete all as specifed and as directed.
SARDALIA CONST CO
PARBAT AND SONS
vijay builders
Kanwal Nain Behl
Bidder Name
vijay builders
Kanwal Nain Behl
SARDALIA CONST CO
PARBAT AND SONS
M/S. RAM PAUL KHAJURIA & BROS.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .