Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.9 L
EMD Value
₹9,899
Closing Date
27 Nov 2026, 10:00 am5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Sr.Executive Engineer
O/o Sr.Executive Engineer,CMD HPSEBL Bhabanagar
Replacement,Bypass of damaged underground water supply line near HP gas agency to near HPSEBL Temple at Bhabanagar and construction of water collection chamber and replacement of damaged pipe at water source at Ponda
2026_HPSEB_148113_1
HPSEBL/CMD/WK-24/2026-24
Open Tender
Civil Works
Percentage
Bhabanagar, Ponda
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,180
₹9,899
20 Nov 2026
20 Nov 2026
27 Nov 2026
20 Nov 2026
27 Nov 2026
20 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. | 5.66 | CUM | 484 | ₹2,739.44 |
| 2.01 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 100 mm dia nominal bore | 432 | Mtr | 1,659 | ₹7,16,688 |
| 3.01 | Providing, welding and fixing of M.S.flanges at suitable reaches, conforming to table as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with GMS Pipes/ MSERW pipes in two layers on outer and one on inner faces to make the joint leak proof (The cost of providing and laying of GMS Pipes / MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts. | 35 | Nos | 1,867 | ₹65,345 |
| 4.01 | GMS Tubes as per IS :1239 - 1990/2004 of Medium Class welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816 -1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
Dia 100mm | 35 | Nos | 654 | ₹22,890 |
| 5.01 | Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. | 2.73 | cum | 7,700 | ₹21,021 |
| 6.01 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in. | 19.44 | sqm | 525 | ₹10,206 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_221575.xls
BOQ • 0.28 MB
SBD.pdf
Tender Documents • 0.52 MB
Termandconditions.pdf
Additional Documents • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .