Providing, installation, testing and commissioning of 20000 GPH x 200 meter head HC pump (standby) required for un-interrupted water supply of Khoon (Pathwar stage-0)

Amount

Providing, Installation testing and commissioning of 20,000 GPH x 200 meter head HC pump set (standby) for un-interrupted water supply of WSS Khoon (Pathwar stage-0) by way of shifting of pump motor set from Jammu upto road side near WSS Khoon (Pathwar stage-0) with the help of crane, mechanical transport and thereafter, unloading the same from vehicle with the help crane and manual labour and then dragging up to the pumping station WSS Khoon (Pathwar stage-0) on channels/pipes using pick axes, crowbars, ropes, tripod stand etc. and stacking inside pump-room. Dismantling of old wornout HC pump set alongwith other electro-mechanical components by way of disconnecting of all incoming electrical connections, decoupling of pump and motor and then unfastening from base frame, suction and delivery. Cutting of worn out suction and delivery bends, pipes, dismantling of old unserviceable sluice valves, reflux valves fitted with suction /delivery lines, plugging of open end of delivery pipe line near manifold by fabrication/fitting of blind flange of suitable thickness with rubber gasket, nuts, bolts etc. to withstand the pressure as well as velocity head created during running of other pumping units. Cutting of base frame from RCC foundation block with gas cutting by using oxygen acetylene gas. The job covers gas cutting / welding at site, handling and stacking of dismantled material. Dismantling /breaking of old existing RCC block by way of deploying skilled and un skilled labour by using pneumatic hammer, high carbon chisels and other tools and tackles etc. up to the depth of approx. 1 meter and cutting of wornout steel mesh .Dumping of excavated material outside the pump room at a distance of about 50 meters. Providing and Fabrication of 6 no. foundation bolts of suitable thickness one meter long by threading them at one end and making of anchor to other end. Relaying of foundation block of size 6’x3’x3’ by way of laying of bed concrete of 1:4:8 mix using 20 percent aggregate, laying of RCC of 1:1.5:3 mix including supply/fixing of farm work / shuttering, aggregates, sand and cement, reinforcement tor steel of 12mm for mesh and all RCC work, angle iron for supporting/alignment of base-frame including cutting, bending, placing in position and binding, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally deployment of vibrator, mixer, welding set, shuttering, tools and tackles etc. and curing complete. Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles, Leveling of pump motor set on the base frame by using laminated sheet, strips and coupling thereof. Laying of 100mm dia MS suction and 100mm dia delivery pipe lines to the pump set by providing, cutting and fitting of 100mm dia pipes as per site requirement approximately 06 meters in length in the convenient lengths with the help of oxygen acetylene gas. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction/delivery pipes in continuous fillet weld using superior quality electrodes conforming to ISI specification. Providing, fabrication and fitting of 100mm dia bends-2nos, MS flanges 100mm dia-3nos, Providing and fitting of CI sluice valve as per suction, pipe extension pieces 100mm dia approximately 3 meters in length to suction pipe lines, gaskets as per requirement. Providing and fitting of CS NRV 100mm dia and CS sluice valve 100 mm dia heavy duty -1no. each with bypass system including nuts, bolts, gasket, flanges ,bends to the delivery pipes of pump set. Job further includes cutting of manifold and then making gas welded joint of delivery pipe end with manifold using oxygen acetylene gas system. Testing and commissioning of 01 no. HC pump motor sets with allied accessories on existing electrical system. Complete job includes cost of material, machinery, hiring / shifting / carriage charges of material, machinery tools and tackles, crane, gas cutting appliances, welding set, shuttering, vibrator, mixer, skilled and unskilled labour charges. NOTE:- the firm should quote separately rebate on old parts / wornout parts / unserviceable items.

M/S Rakul Laira

Vaibhav Engineers and Technocrates

VEE AUTO TRADERS