REPAIR TO SEEPAGE TREATMENT SUNKEN FLOOR PLASTERING WORK AND MISC REPAIRS TO BLDGS IN SOUTH CAMP AT AFS SAMBRA

Amount

Taking down cement plaster as in wall / ceiling including racking out joint, hacking for key, scrubbing down with water etc.all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but all as specified and directed.

M & L Pre cast cement concrete 1:3:6, type C1 using 20 mm graded stone agrregate as in solid block masonry exceeding 10cm in width and set in cement mortar 1:6 complete all as specified and directed

M & L Pre cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonry not exc 10cm in width and set in cement mortar 1:4 complete all as specified and directed

M & L Preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and Masonry with polymer mixed slurry and as directed.

Material and labour for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours and as directed

M&L applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour -crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in lean concrete in sunken portion all as specified and as directed.

M & L 40mm thick Plain cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate as in roof padding all as specified and directed.

M & L rendering 10mm thick in cement mortar 1:3 mixed with water proofing compound as specified by manufacturer instructions on concrete surface of roof and surface finished fair and even in required slope for draining out the rain water complete all as specified and directed. Note - WPC will be measured and paid for seperately.

M & L Preparing RCC roof slab by removing dust, dirt and applying oil bond bituminous primer @ 0.2Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighting not less than 3 Kg/Sqm reinforced with non woven polyester matt weighing not less than 150 gms/sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded and applying a coat of blown hot bitumen 95/15 over a membrane at 1.20 kgs/sqm all as per detailed specification and procedure all as specified and as directed.

M & L Applying a coat of solar reflective bituminous aluminium paint over APP membrane on roof top surfaces at 0.10 kg/sqm all as specified and as directed.

Cleaning the existing ceiling surface of concrete and exposed reinforcements by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Epoxy zinc primer over a coat of Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new plastering complete with necessary scaffoldings all as specified and as directed. Note : Epoxy primer and bonding agents are measured seperately.

S & F welded steel fabric not exc 4kg/sqm complete welded with existing steel reinforcement elements all as specified & directed

Supply only epoxy zinc rich primer all as specified & directed Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ Equivalent in PIDILITE

Supply only Solvent free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ equivalent in PIDILITE

S & F Galvanised iron wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste all as specified & directed

Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material as directed.

M&L 25mm thick Plain cement concrete 1:2:4 , type B0 using 12.5mm graded stone aggregate as in levelling course/sub base under floor finished even and fair all as specified & directed

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over & including 15 mm thick cement mortar 1:6 bed complete all as specified and directed.

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over & including 15 mm thick cement mortar 1:6 bed complete all as specified and directed.

M & L Coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 cm thick backing coat in Cement mortar 1:4 complete all as specified and directed.

Taking down 40 mm bore steel/PVC tubing including fittings/fixtures and connection all as specified and directed.

Taking down 25 mm bore steel/PVC tubing including fittings/fixtures and connection all as specified and directed.

Taking down 20 mm bore steel/PVC tubing including fittings/fixtures and connection all as specified and directed.

Taking down 15 mm bore steel/PVC tubing including fittings/fixtures and connection all as specified and directed.

Cutting chases on stone walls/concrete , pinning in, making good to facings where required and pointing in cement mortar 1:3 to cutting chases for concealed water tubing etc. and making good.exc 20 cm girth all as specified & directed.

S & F Unplasticised PVC pipes 15mm dia of pressure rating 10 kgf/sq cm fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified & directed.

S & F Unplasticised PVC pipes 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified & directed.

S & F Unplasticised PVC pipes 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified

S & F Unplasticised PVC pipes 40mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified

S & F in repairs flush pipe 32mm dia of polyethylene of low or high density or PVC for low level flushing cistern complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan pedestal pattern white (excluding flushing cistern) including following accessoreis all as specified & directed :- (i) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (II) Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook

Supply and fix in repairs vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with integral foot rest (excluding flushing cistern) including provision of lime concrete bedding etc complete all as specified & directed

Supply & Fix in repair PVC valve less syphonic action type low level flushing cistern 10 Ltr capacity including flange valve handle, bracket, PVC flush down pipe 32 mm dia length upto 1.3 m height as required with bend all as specified & directed

S & F in repair Vitreous china wash basin, white, flat back size 550X400mm including, CP brass waste coupling 32mm dia PVC waste pipe of suitable size and cutting for and pinning in ends for brackets or erecting stand brackets all as specified & directed

Dismantling water tanks of capacity exc 250 ltrs and not exc 500 ltrs all as specified and directed.

Dismantling water tanks of capacity exc 500 ltrs and not exc 1000 ltrs all as specified and directed.

Dismantling water tanks of capacity exc 1000 ltrs and not exc 2000 ltrs all as specified and directed.

Supply and fix 500 liters capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered, hoisted and fixed in position all as specified in SSR Part-1including one ball valve high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 25 mm dia (minimum weight 455gms) complete all as specified and directed

Supply and fix 1000 liters capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered, hoisted and fixed in position all as specified in SSR Part-I including one ball valve high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 40 mm dia (minimum weight 690gms) complete all as specified and directed

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical vertical with closed top) double layered, hoiseted and fixed in position all as specified in SSR Part-1 including one ball valve high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 40 mm dia (minimum weight 690gms) complete all as specified and directed.

Disconneting existing tanks of capacity exc 250 ltrs to 500 ltrs, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. and reconnecting and re fixing in position after necessary cleaning all as specified and directed.

Disconneting existing tanks of capacity exc 500 ltrs to 1000 ltrs, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. and reconnecting and re fixing in position after necessary cleaning all as specified and directed.

Disconneting existing tanks of capacity 1000 ltrs to 2000 ltrs, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. and reconnecting and re fixing in position after necessary cleaning all as specified and directed.

Supply and fix in repairs Gun metal gate valve, 25mm bore and iron wheel head, screwed both ends internally fixed for iron pipe complete all as specified and directed.

Supply and fix in repairs Gun metal gate valve, 40mm bore and iron wheel head, screwed both ends internally fixed for iron pipe complete all as specified and directed.

Supply and fix Bib taps 15mm dia fancy type brass chromium plated, round handle, screwed down, screwed for iron pipe and fixed in repair all as specified and directed.

Supply and fix stop valves / Angle valves 15mm dia fancy type, brass chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed in repair all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar of size 110 mm/ 75 mm all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Taking down and refixing PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Taking down and refixing PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet including fixing to existing pipe properly with solvent all as specified and directed

S & F in repair PVC (SWR) bends for 75 mm bore pipe with access door all as specified and directed

Supply and fix in repair PVC SWR 75 mm dia branch pipe, singe (Single Y) equal or unequal provided with access door all as specified and directed

Supply and fix in repair PVC bends for 75 mm bore pipe all as specified and directed

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 110 mm dia outlet including fixing to existing pipe properly with solvent all as specified and directed

S & F in repair PVC (SWR) bends for 110 mm bore pipe with access door all as specified and directed

Supply and fix in repair PVC SWR 110 mm dia branch pipe, Double (double Y) equal or unequal provided with access door all as specified and directed

Supply and fix in repair PVC bends for 110 mm bore pipe all as specified and directed

S & F in repair PVC (SWR) vent cowl 110 mm dia all as specified and directed

Dismantling of wrought iron or mild steel work of any description like wind ties / purlins and rafters complete all as specified and directed.

Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets in roof coverings incl ridges complete all as specified and directed.

Dismantling RCC posts or struts ( steel , RCC) any section including taking down embedded portion and making good as disturbed ground all as specified

M & L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed

Supply and fixing Rolled sections as in main and cross beams, posts, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

M & L rendering 10 mm thick cement mortar 1:6 over brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M & L rendering 15 mm thick cement mortar 1:4 over brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M & L rendering 5 mm thick cement mortar 1:3 on concrete ceiling surface finished even and smooth without using extra cement all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

Material & Labour for applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls including preparation complete as all as specified and as directed .

M & L Preparation of newly plastered wall surfaces and applying two coat of oil bound emulsion over a coat of self primer on 1mm thick layer of putty finished smooth all as specified and directed

M & L Preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and directed

M & L Preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed

M & L Preparation of old plastered wall surfaces and applying two coats of white wash all as specified and directed

M & L Preparation of old plastered ceiling surfaces & applying with two coats of white wash all as specified and directed

S & F in repair 1 mm thick aluminium sheeting fixing on crumple section all as specified and directed.

S & F in repair High density polyethylene pipes (HDPE) 40mm bore dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.all as specified and directed.

Demolition of reinforced cement concrete, in suspended slabs, beams, lintels, etc in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) .all as specified and directed.

M & L mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick fair finished flat surfaces (horizontal or slopping) all as specified and directed.

M & L reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 sqm, complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) including making good the disturbed surfaces with existing specifications complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed

S & F Aluminium anodised, barrel tower bolts 100 mm long of extruded section and fixed all as specified & directed

S & F Aluminium anodised handle, cast type , 150 mm long all as specified & directed

S & F Stainless steel butt hinges 100 mm long all as specified & directed

Taking down, easing and adjusting, refixing builders hardware as required, and refixing of shutters of any description (wooden, aluminium, mild steel) in same opening of any description exc 1 Sqm but not exceeding 2 sqm, including renewal of unserviceable screws etc complete all as specified

M & L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in 75mm thick plinth protection and finished even and fair, cutting expansion joint and filling bitumen in joints all as specified and directed.

M & L Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work, including exposed surface of concrete shall be finished even and smooth without using extra cement complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

M/s B C CHOUGULE

RAJENDRA KRISHNA SARAF

M/s. N D KALING

M/S ADITYA CONSTRUCTIONS

PURVIK CONSTRUCTIONS

M/S. ADARSH ENTERPRISES