REPAIR/ MAINTENANCE OF STREET LIGHTS, SECURITY LIGHTS, PERIMETER LIGHTS AND OTHER CONNECTED WORKS AT BAIRAGARH AND SI LINES UNDER GE BHOPAL

Amount

Taking down defective 40/150/250/400 watt SV/MH street light fittings, security light, CFL/flourescent tube light fittings (ant type & size), LED light any type, through ladders, mounted on any typr of poles/bldgs (upto 13 mtr height) with bracket, disconnecting, testing all components, dismantling for replacemnt defective components such as choke, ignitors, holders, capacitors, lamps, driver, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the light fitting after fixing of new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares parts such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 watt SV/MH/LED lamp type light fittings (aprox 6 to 9 Nos in each fitting), integral/ non integral type flood light fitting, aviation light, etc, any type, mounted on semi high mast pole upto 12 mtr height fixed on brackets/round ring (cage), disconnecting, testing all components, dismantling for replacement of defective components such as choke, ignitors, holders, capacitors, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 watt SV/MH/LED lamp type light fittings (aprox 6 to 9 Nos in each fitting), integral/ non integral type flood light fitting, aviation light, etc, any type, mounted on semi high mast pole 12 tp 20 mtr height fixed on brackets/round ring (cage), disconnecting, testing all components, dismantling for replacement of defective components such as choke, ignitors, holders, capacitors, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

S&F in repairs 400 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs 250 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs 150 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs 400 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs 250 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs 150 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs electronic ignitors suitable for 150/250/400 watt SV/MH street light fitting 240V, 50 Hz suitable for 5 mtr striking distance complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs porcelain holder (threaded type) with base e-27 suitable for 150/250/400 Watt SV/MH SE lamp fitting complete all as specified and directed .

S&F in repairs capacitor 30 MFD suitable for 150/250/400 Watt SV/MH street light fitting, 250v, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs twin core 4.0 sqmm PVC insulated and PVC sheathed stranded aluminium conductor complete all as specified and directed.

S&F in repairs Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

Taking down existing street light fitting any type and S&F Integral LED Street light luminaire of 25 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LR02-291-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

Taking down existing street light fitting any type and S&F Integral LED Street light luminaire of 45 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LR02-501-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

Taking down existing flood light fitting any type and S&F Integral LED flood light luminaire of 70 W with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LR02-781-XXX-57-G2) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

S&F in repairs Nature switch (Model- Swadeep 02) sensor with & including switching timer complete all as specified and directed. [MAKE: KAKATIYA ENERGY SYSTEM/BAJAJ/ HEALER as approved by GE.]

S&F in repairs 3 Pole contactor of AC 3 rating 25 Amp, 3 Phase, 415 V as per IS 13947-4-1 suitable for nature time switch (Model- Swadeep 02) complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER as approved by GE.]

S&F in repairs single Pole contactor 16 Amp, single Phase, 240 V as per IS 13947-4-1 suitable for nature time switch (Model- Swadeep 02) complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER as approved by GE.]

S&F in repairs clear acrylic cover with gasket packing for SV/MH lamp fittings upto 250w capacity all as per existing fitting complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Taking down post top lantern fitting any type and S&F Integral LED post top lantern 1 x 40 watt, made of aluminium spigot housing with decorative clear acrylic diffuser and IP 65 protection with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length and testing on completion complete all as specified and directed. [MAKE: Bajaj (Cat no.112538 'CELESTA' BGCL 40W LED (white) or equivalent in Philips/ Crompton/WIPRO/Havells/LUKER as approved by GE.]

Taking down old tilted existing pole/semi high mast pole, any type, any size (tilted in foundation due to settlement in loose/black cotton soil), after removing existing conductors, light fittings, insulators, cross arms, channels, clamps, pipes, light mounting circular cage, etc and re-errecting of the pole in existing or new location and refitting all accessories complete all as specified and directed. NOTE:- Excavation, earth work, PCC for founadtion and copping works shall be measured sepeartely.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including filling at road cuttings or making pillars for supporting pipe including necessary form work complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed. including necessary form work complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 10 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

Cutting of bituminous road/PCC hard standing/road/floor for laying of GI pipe upto 80mm dia (trench not more than 0.3m x 0.3m) for passing of cable including making good the disturbed surfaces all as per existing complete all as specified and directed. Note:-GI pipe shall be measured & paid separately under relevant items of this schedule.

Taking down existing unserviceable street light control box, any type and S&F MS sheet 2mm thick control gear box for street/security light of size not less than 250mm x 300mm x 200mm, with aluminium bus bar of 32 amps rating for single phase & neutral mounted on epoxy based insulators with locking arrangement fixed to pole with MS clamps - 2 Nos of 20 x 4 mm flat iron with & including MCB, SP, 6 amps, B- curve, 230 volts- 1 No. complete all as specified and directed.

S&F in repairs Analog time switch (FM series) all as per existing complete all as specified and directed. [MAKE: L&T (Model- GIC) /SCHENIDER/BCH as approved by GE.]

Taking down existing flood light fitting any type and S&F Integral LED flood light luminaire of 150 W with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LF20-192-060-57-G2) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

Taking down existing flood light fitting any type and S&F Integral LED flood light luminaire of 100 W with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro(Cat no. LF20-122-060-57-G2) or equivalent in Philips/ Crompton/Bajaj/Havells/LUKER as approved by GE.]

S&F in repairs LED tube lamp 20/21Watt (LED retrofit tube, T8 pattern, single side connection), 240V, PV > 0.90, colour Temp 6500 K, system luminious efficancy >100Lm/W to be fixed in existing or new batten including taking down of existing fitting and changing the wiring according to T8 LED retrofit lamp in existing T8 street light fitting (box type) with G13 lamp holder complete complete all as specified & directed. [Make: Bajaj/ Philips/Wipro/Crompton/Syska/Havells/Luker as approved by GE].

S&F in repairs LED driver suitable for 45 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 25 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 80 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 90 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 100 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 150 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs integral LED aviation light luminaires comprising of aluminium housing with polycarbonate enclosure with electric connection wire of 2 core 1.5 sqmm complete all as specified and directed. [MAKE: BAJAJ ( Model No. BGAV302 LED) or equivalent in WIPRO/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

M&L for painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/street light with two coats of aluminium paint after scratching out old paint, cleaning the existing surface rust free, preparation of the surface including marking pole numbers in a 20 cm dia yellow circle with number writing with black synthetic paint & painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of white fluorescent paint (up to 1.5 mtr height) throughout the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs.22,904.00

PRAGATI ELECTRICALS AND ELECTRONICS

M/S RAKESH TRADERS

UMESH ENTERPRISES