82538/Addn/Altrn/Updradation of certain toilets at AFS Sulur

Amount

M&L Brick work with modular fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed

Demolition of brick work built In cement mortar, including all quoin, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles and rubbish off the premises complete all as specified and as directed

Taking down cement plaster on brick or stone walls, or concrete or ceilings, roof in any position including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. (Note:- The quoted rate shall include for removal of debris outside MD land)

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 5 mm thick cement plaster on concrete (ceiling) surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed

M&L Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

M&L Granite 18 to 20mm thick (table rubbed and polished) in steps, Jambs, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed (Incl demolition of stone slabs)

Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed

M&L Glazed ceramic coloured tiles in vertical surface 350x250x7 mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

Taking down Chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats or frames with shutters exceeding 1.5 Sqm each but n exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed (Stile and rails feathered at edges)

S&F 100mm long stainless steel, butt hinges complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repair 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs 100mm long stainless steel, butt hinges complete all as specified and as directed.

S&F in repairs 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F in repairs 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white with fixing bolts including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed

S&F in repair PVC valveless syphonic action type flushing cistern,10 Ltr capacity low level white with inlet ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cistern complete all as specified and as directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

S&F CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge Make:- CAT Part No-QT F2006163, HT 3001163 of CERA or equivalent model of other manufactureres from the list.

S&F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed

S&F in repairs vitreous china urinals bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back with cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F in repairs Chromium plated urinal spreader suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repair Pillar tap 15 mm cast copper alloy, with capstain heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair Stop valves 15 mm fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

M&L in repairs grating doom 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Chromium plated brass shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed

S&F in repairs CP Soap dish complete all as specified and as directed. Make:- CAT Part No- F 5007106 of CERA or equivalent model of other manufactureres from the list.

S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

M&L in repair PVC (SWR) floor trap (dia of outlet 75mm), plain with grating including jointing with solvent cement complete all as specified and as directed

M&L in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed

S&F in repairs aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed

S&F 3-layer 25 mm PP-R poly propylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls ceilings or in floors etc complete all as specified and as directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

S&F in repairs 25mm outer dia of pipe PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs 75mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F in repairs 75mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F in repairs Brass chromium plated bottle traps 32mm bore dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed

D.R ASSOCIATES (BID ID -3151975)

GMS Builders (BID ID -3151714)

Vishnu Infrastructures (BID ID -3150730)

LAKSHMI ELECTRICAL ENTERPRISES (BID ID -3149233)

K S MUTHU CONSTRUCTTIONS (BID ID -3151673)

p.chinnasamy (BID ID -3152154)

G Perumal and co (BID ID -3151762)

T C KARUNANITHI (BID ID -3151042)

CAK Enterprises (BID ID -3149860)

KRISHNA ENTERPRISES (BID ID -3146350)