PROVN OF 01 x PARA PACKING SHED (36FT x18 FT) AT 725 (I) AD PL ASC UNDER GE TAWANG

Amount

Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in hard / dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) each N.exc 0.5 cum getting out in soft soil , returning filling in and ramming earth or broken rubble mixedwith earth around in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good the surface complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bdeeded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M & L 100mm for cement concrete type D2 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for layinf floor finishes (CM 1:4) complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0. 11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S& F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E-250) quality complete all as specified and directed.

M &L two coat of synthetic enamel paint over a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth incl complete all as specified and directed.

S & F pre-painted galvatume aluminium Zince coaing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws acomplete all as specified and directed.

S & F framed work as in gusset plae for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel haging door fitting etc of Fe-410 Gde 250A complete all as specified and directed.

S & F for second class hard-wood in scantlings for wall paneling and ceiling all complete all as specified and directed.

S & F for second class hard-wood in clean sawn with butt joint complete all as specified and directed.

M & L 4 mm thick ceiling for playwood grade BWR, type BB, fixed with screws to timber frame works deduct if fixed with nail and add if fexed in ceiling, flat of slooping complete all as specified and directed.

M & L 6 mm thick ceiling for playwood grade BWR, type BB, fixed with screws to timber frame works deduct if fixed with nail and add if fexed in ceiling, flat of slooping complete all as specified and directed.

M&L for preparation of new wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

M&F 4mm thick sheet glass ordinary quality and glazing with oil puty in square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F for 30mm thick 2nd class plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed.

S&F aluminium handles 125mm size, cast type, anodised all complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.

E&M Portion M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

All as per item No 27 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed.

All as per item No 27 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 27 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 4.0 sq mm cable as earth continuity complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts complete all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed.

Supply & fixing surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make Havells ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified.

S&F battern LED light fittings, 1x10W luminiaries with lamp holder, etc. Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Make Havells cat part No. LHLDERHEMD8X010 & equivalent make specified.

S&F security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed.

Supply and fixing MCB SPN 240V 63 Amps,10 KA complete all as specified and directed.

S & F XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 2corex10SQMM along the wall/Earth complete all as specified and directed. ( from LT panel to MT Shed SPN DB as incoming).

Excavation in trenches not exceeding 1.5m in width and 1.5m depth for laying LT Cable and getting out in hard/densesoil rock complete all as specified and directed.

Returning filling including spreading , leveling ,watering and well ramming in layers not exceeding 25 cm all complete all as specified and directed.

Removing excavated surplus soil not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting points in soil complete all as specified and directed.

M & L for sand filling under floors in foundations & in trenches including watering and consolidation complete all as specified and directed.

M & L for reinforced precast concrete cable cover, class LV Type 1, flat size 250mmx150mmx40mm complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

M/S ARUNACHAL VIKASH

M/S GOLANG CONSTRUCTION CO.

M/S KESANG CONSTRUCTION

M/S L G BUILDERS

M/S NAVA BHARAT BUILDERS

M/S P N ASSOCIATES