Annual Maintenance of borewell, pumpset, panel boards and cables From Ward no 13 to 23 Chandapura TMC Limit

Annual Maintenance of borewell, pumpset, panel boards and cables From Ward no 13 to 23 Chandapura TMC Limit

Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...

13.1.8 For all types of submersible pumpsets above 7.5 HP and upto 8.0H.P.

13.1.13 For all types of submersible pumpsets above 10 HP and upto 11 H.P

13.1.15 For all types of submersible pumpsets above 12 HP and upto 13 H.P.

13.1.18 For all types of submersible pumpsets 15HP to 20 HP

Replace the components of submergible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

13.2.2 The Intermediate piece (IP) with IP leaded bronze brush.

13.2.3 The Oil Seal.

13.2.4 The Oil Seal.and steel bush

13.2.5 The Guide Vane

13.2.6 The Impeller (Shell moulded with aluminium and bronze.)

13.2.7 The discharge outlet (DO) bearing DO steel bush DO bearing.

13.2.8 The steel bearing bush (DO steel bush)

13.2.9 The allen screw

13.2.10 The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for each stage @ Rs.40/-.

13.2.11 The pump key (stainless steel)

13.2.12 The pump coupling (stainless steel)

2.13 The Non Return Valve (NRV) assembly complete with rubber"O" ring.

13.2.14 The cable guard

13.2.15 The strainer

13.2.16 The brass filter

13.2.17 The Labour Charges for overhauling of the pump set.

Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...

13.3.3 The STATOR of motor 4 to 5 H.P

13.3.4 The ROTOR of motor upto 3.0 H.P

13.3.5 The ROTOR of motor 3 to 4 H.P

13.3.6 The ROTOR motor 4 to 5 H.P

13.3.7 The upper flange

13.3.8 The lower flange

13.3.9 upper/ lower housing

13.3.10 The Lock Ring

13.3.11 The Carbon Housing

13.3.12 The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.

13.3.13 The Carbon Housing (Top carbond / ferrodo padding)

13.3.14 The Stud and Nuts

13.3.15 The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing brush

13.3.16 The Circlips

13.3.17 The Motor base with pin

13.3.18 The Transportation of pumping machineries

13.3.19 The Re-errection charges of pumping machineries including overhauling and painting

13.3.20 The lifting of submergible pumpset from well

13.3.21 The Labour charges only for overhauling