Loading
Loading…
Loading…
Tender Value
₹12.7 Cr
EMD Value
₹25.5 L
Closing Date
21 May 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
+ Capital Works)
SOUTH
15 conditions · 4 needing a document upload
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Technical Eligibility Criteria:-The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(a)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at leastone work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs 50 lakh, no previous work experienceof subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Similar Nature of work- Any Civil Engineering work involving construction of bridges/foot-over bridges (FOBs)/sheds/cover-over platforms/workshops involving fabrication and launching/erection of steel 1.1.1 girder/composite girders/steel structures". Note: Cost component of such works in completed work shall be at least 30% of the advertised cost of the tender.
16 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be Submitted Along with Tender: (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(b)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(c)Partnership Firm: (i) All documents as mentioned in Para18 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 andPara17 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip
(d)Joint Venture (JV): All documents as mentioned in Para 17 of the Tender Form (Second Sheet)of General Conditions of Contract-2022 and Para16 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(f)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (v)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract- 2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip. (iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Sole proprietor/a company or a partnership firm/joint venture (JV)/registered society/registered trust / HUF/LLP, Power of Attorney etc: The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and f\lather to dealwith the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shallbe summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with allother contractualactivities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
Provision of Foot Over Bridge with ramp and staircase at Nagri and Babupeth stations under Nagpur division.
DRMWNGP-47-2026-03
DRMWNGP-47-2026-03
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹25.5 L
21 May 2026
29 Apr 2026
7 May 2026
102 items across 11 schedules · ₹14,74,35,646.48 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 2239 | 283.98 | 6,35,831.22 |
| 2 | All kinds of soil | cum | 1053 | 177.5 | 1,86,907.5 |
| 3 | Ordinary rock | cum | 51 | 498.9 | 25,443.9 |
| 4 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 96 | 215.6 | 20,697.6 |
| 5 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 256 | 352.15 | 90,150.4 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 334 | 196 | 65,464 |
| 7 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 404 | 700.5 | 2,83,002 |
| 8 | Concrete of M15 grade with minimum cement content of 240 kg /cum | cum | 37 | 8,986.15 | 3,32,487.55 |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 427 | 392.15 | 1,67,448.05 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1329 | 927.25 | 12,32,315.25 |
| 11 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 101 | 736.4 | 74,376.4 |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 22089 | 107.85 | 23,82,298.65 |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 13581 | 107.85 | 14,64,710.85 |
| 14 | Concrete of M55 grade with minimum cement content of 370 kg /cum | cum | 276 | 9,806.7 | 27,06,649.2 |
| 15 | Concrete of M35 grade with minimum cement content of 370 kg /cum | cum | 176 | 10,162.35 | 17,88,573.6 |
| 16 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 48 | 733.5 | 35,208 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 50 | 7,370.65 | 3,68,532.5 |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 7680 | 117.35 | 9,01,248 |
| 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 38016 | 133.7 | 50,82,739.2 |
| 20 | Electric resistance or induction butt welded tubes | Kg | 34272 | 194.4 | 66,62,476.8 |
| 21 | Providing and fixing bolts including nuts and washers complete. | Kg | 2304 | 159.35 | 3,67,142.4 |
| 22 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 17280 | 123.6 | 21,35,808 |
| 23 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 28800 | 772.4 | 2,22,45,120 |
| 24 | Light shade pigment using white cement | Sqm | 346 | 1,533.8 | 5,30,694.8 |
| 25 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 1323 | 3,186.7 | 42,16,004.1 |
| 26 | 1.60 mm thick with zinc coating not less than 350 gm/m2 | Metre | 102 | 1,863.9 | 1,90,117.8 |
| 27 | 100 mm dia Pipe | Each | 36 | 580.5 | 20,898 |
| 28 | 110 mm | Each | 4 | 136.15 | 544.6 |
| 29 | 110x110x110 mm | Each | 4 | 234.15 | 936.6 |
| 30 | 110 mm bend | Each | 4 | 150.35 | 601.4 |
| 31 | 110 mm Shoe | Each | 8 | 131.85 | 1,054.8 |
| 32 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 791 | 738.65 | 5,84,272.15 |
| 33 | Ridges plain (500 - 600mm) | Metre | 342 | 532.35 | 1,82,063.7 |
| 34 | Two or more coats on new work | Sqm | 856 | 146.8 | 1,25,660.8 |
| 35 | 150 mm diameter pipes | Metre | 116 | 121.35 | 14,076.6 |
| 36 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 132 | 2,434.25 | 3,21,321 |
| 37 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 2239 | 263.95 | 5,90,984.05 |
| 38 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in- Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.. | Metre | 320 | 3,439.5 | 11,00,640 |
| 39 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 168 | 2,017.6 | 3,38,956.8 |
| 40 | Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). | Sqm | 1247 | 1,525.6 | 19,02,423.2 |
| Schedule total | ₹5,93,75,881.47 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
PCECIR_1.pdf
ATTACHMENT
PCECircular208Mixdesignlimits.pdf PCE Circular for Mix design
ATTACHMENT
SpecialTechnicalCondition...pdf
ATTACHMENT
FOBNagriBabupeth.pdf
ATTACHMENT
PCECircular208Mixdesignlimits.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .