REPAIR AND MAINT OF FLOORING, JOINERY, PLASTEREING AND CONNECTED B/R WORKS FOR OFFICERS MD ACCN UNDER GE (SOUTH) PATIALA.

Amount

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 C-0) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc, of size 105x 60mm, complete all as specified and direcetd, including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 C-0) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc, of size 125x 60mm, complete all as specified and direcetd, including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

Taking down old chowkhats or frames any type incl shutter exc 1.5 sqm but not exc 4 sqm, including removal of old material from site, complete all as specifed and directed.

Taking down of shutters only any description exc 1.0 Sqm but not exceeding 2.00 sqm, including removal of old material from site, complete all as specifed and directed.

S&F factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with veneer with 6mm thick lipping frame to match, complete all as specified and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf (Note:- Steel Mongery shall be paid as supply only against respective item.)

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf. (Note:- Steel Mongery shall be paid as supply only against respective item.)

S&F powder coated 50 micron aluminium glazing/ doors & shutters made out of aluminium anodised section 63.5x38.10x1.29mm in chowkats / frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3x44.45x.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf ( Note :- (i) Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item. (ii) Note:- Mongery shall be paid as supply only against respective item.)

Providing and fixing factory made aluminium casement windows with 80 micron powder coating doubled panelled and double shutters consisting of frame of 127X38.10X1.74 mm and shutters made of 45X45X1.63mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 32 Gauge in inner shutters and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf ( Note :- (i) Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item. (ii) Note:- Mongery shall be paid as supply only against respective item.)

Providing and fixing factory made aluminium ventilator with 50 micron powder coating frame of 63.5x38.10x1.29mm and including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed including taking down existing shutter with frame in all respect as specified

S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect all as specified including taking down existing damaged shutter and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 1 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 1 nos per leaf (c) Stainless Steel (304 Grade) Finished magnetic Catchers - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Hapse and staple - 1 nos (e) Continuous ( Piano Hinges30 mm l )304 Grade) Stainless Steel (304 Grade) - 1 Nos per leaf. (Note:- Steel Mongery shall be paid as supply only against respective item.)

S&F 8mm thick glass fixing in aluminium door/ window including gubber gaskit & beading complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden or steel frame glazed with putty or fixed wih beads, complete all as specified and directed.

S&F of 3 mm thick plain glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F of 3 mm thick pin headed glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in replacement MS CP drapey curtain rod of approved quality of 25mm dia,1.6mm wall thickness as in curtain rod complete incl 02 Nos matching bracket fancy type, stops etc all as specified and directed as in repair. (For the purpose of measurement and payment running length of curtain rod only shall be considered).

Dismantling floor hearth wall tilling incl CM (beading bud not backing), removing serviceable tiles to store & rubbish off the premises.

M &L for Rubber moulded Machine pressed precast coloured concrete interlocking paver block(available in different colour for making patterns) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment laid over and including 25mm thick sand cushioning complete all as specified and directed.

M & L in repair Mild steel as in cooler stands made of square or rectangular hollow MS tube with provision of welding or drilling holes incl MS anchor bolts fasteners of required size including preparing the steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified .

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark shade tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

Demolition of cement concrete (un-reinforced) in any thickness (below or above ground level), including removal of debris from site, complete all as specified and directed.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris from site, complete all as specified.

10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in two layers (10 mm and 5mm respectively) cement plaster in cement mortar 1:4 (mixed with integral liquid water proofing compound of approved make as per manufacturer's instructions but not less than 125 gms per bag of cement) on fair faces of brick work or concrete external surfaces finished even & smooth without using extra cement complete all as specified and directed. Note: - Integral liquid water proofing compound shall be measured and paid for separately against respective item.

Rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

GI wire netting 0.90mm dia and 12 mm mesh lathing to wood or metal studing, joists, etc. in walls, ceiling, stanchions, beams, etc., incl all laps, cutting & waste.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant cement priming paint complete all as specified and directed

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 1mm th wall putty complete all as specified and directed

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on ceilingcomplete all as specified and directed

Supply only water proofing liquid compound

Supply only brass mortice lock 4 lever complete all as specified

Supply only Stainless Steel (304 Grade) Finished Butt Hinges 150mm, complete all as specified.

Supply only Stainless Steel (304 Grade) Finished Tower Bolt 200mm long, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Handles 200 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Floor Door Stooper, complete all as specifed.

Supply only 200 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified.

Supply only Powder Coated Aluminium Tower Bolt 200mm long, complete all as specified.

Supply only Powder Coated Aluminium Tower Bolt 150mm long, complete all as specified.

Sipply only Powder Coated Aluminium Handles 150 mm, complete all as specified and directed.

Supply only magnetic Catchers for cupboards, complete all as specified.

Supply only Stainless Steel (304 Grade) Finished Hapse and staple, complete all as specified.

Supply only Continuous Piano Hinges 30 mm Stainless Steel (304 Grade) complete all as specified.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

AR CONSTRUCTIONS

m/s panchmukhi builders