REPAIR TO INTERNAL ELECTRIFICATION FITTING FIXTURE BUILDING SECURITY LIGHT ENERGY SAVING FITTING AND WELCOME MAINTENANCE OF EM SERVICES AT TECH AREA DSC WATCH TOWER STN HQ MAIN GUARD ROOM AREA OFFRS MD ACCN 8 ASC SMC NO1 SNCO MESS AIRMEN BILLETS GIS

Amount

M&L required for attending electrical complaints of point/submain wiring (except fittings and fixture) of any type,rating etc in position including testing of serviceability of point wiring, finding of fault/ defect and repairing the same by proper jointing of wires/ cables including required jointing materials and making wiring functional complete all as specified and directed. Note for Sl.item No 1:- Quoted rate shall be inclusive for following provisions: (i) Contractor shall collect the complaints from MES complaint cell on daily basis (ii) Insulation tape, pieces of wires/ cables etc as required for rectifying complaints (iii) Contractor shall submit the details of rectification /non retification of complaints to Engineer-in-Charge after attending complaint.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, regulators, sockets etc to be measured tely) and making good disturbed surface of wall, floors etc all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed for the following :-

One light point controlled by one switch.

One light point controlled by one switch 5 Amps Two way switch

One ceiling fan/Exhaust fan point controlled by one switch 5 Amps, one way

One 3/5 pin 5 Amps socket outlet on independent board

One call bell point controlled by one bell push

One 3 pin 5 Amps socket outlet on same board

All as per item No 3 above but for one 3/5 pin socket outlet 15 Amps independent with cable 2.5 Sq mm size FRLS copper cable.

Attending electrical complaints with Supply and fix in repairs the following items including disconecting, removing, and connecting into electric circuit and testing:-

Switch piano flush type 5 Amps, Single Pole one way.

Switch piano flush type 5 Amps, Single Pole two way.

Switch socket flush type 2 in 1, 5 pin 5 Amps 240 V

Switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal.

Fan regulator stepped type electronic flush/switch type, suitable for 1200mm /1400 mm sweep fan.

PVC ceiling rose two to three terminal plate and jumbo type

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Call bell 230 volts single pole A/C multimusic fancy type ding dong bell.

Bell push Flush type 5 Amps

MCB DB SPN double door, 4 way 230 V neutral link, earth link.

MCB DB SPN, double door, 8 way 230 V with 200 A rated bus bar neutral link, earth link.

MCB DB TPN 4 way vertical type double door complete including 200A rated copper bus bar, and netral and earth link suitable with MCB TPN as incommer.

MCB SP 05 to 32 Amps 10KA 230 volts

MCB SPN 05 to 40 Amps 10KA 230 volts

MCB TP 63 Amps 10KA 415 volts

MCB TP 100 Amps 10KA 415 volts

Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volts

MCCB 25 to 100 Amp 3 pole 16 KA breaking capacity 415 Volts

Modular switch 1 way 6A 1 module

Modular switch 1 way 16A 2 module

Modular socket 6A 2/3 pin combined 2 module

Modular socket 6A/16A 2/3 pin combined 2 module

Modular type fan regulator 120W ,2 Module suitable for 1200mm/1400mm sweep fan

Taking down sub main wiring of any description along with PVC conduit/ Casing capping and made good the disturbed surface all as specified and as directed.

M&L for sub main wiring complet with two runs of 4.0 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through PVC conduit and accessories on surface of wall roofs etc with One runs of 4 Sqmm of PVC FRLS copper cable for earth continuity all as specified, dismantling existing circuit/ sub main wiring and making good disturbed portion complete all as specified and as directed.

All as per item No 7 here in before but with PVC casing caping.

M&L for sub main wiring complet with two runs of 6.0 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through PVC conduit and accessories on surface of wall roofs etc with One runs of 6 Sqmm of PVC FRLS copper cable for earth continuity all as specified, dismantling existing circuit/ sub main wiring and making good disturbed portion complete all as specified and as directed.

S&F in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 18 W LED (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing all as specified and as directed. Make : Bajaj : Product code : 112409 Cat part No : BCLSB 18 WH or other equivalent cat Part No of approved make as specified in particular specification .

S&F in replacement of Bulkhead light fitting LED luminares Environmental friendly, energy efficient,aesthetically designed, decorative round moulded body, wall/ceiling light LED fixture with opal diffuser to give glare free light. with 10W LED lamp including disconecting, removing, and connecting into electric circuit and testing all as specified and as directed. Make : Bajaj : Product code : 112334 Cat part No : BLBWP10 W LED or other equivalent cat Part No of approved make as specified in particular specification .

S&F in replacement of Mirror light fitting LED luminares New generation energy saving IP65 Mirror light luminaire with opal diffuser with 10W LED including disconecting, removing, and connecting into electric circuit and testing all as specified and as directed. Make : Bajaj : Product code : 112408 Cat part No : BCLSB 10 NW or other equivalent cat Part No of approved make as specified in particular specification .

NOTE for Ser No 10 to 12: (a) LED light fitting of make/brand specified above if not available in the market, other equivalent make as specified in list of makes shall be provided without any extra cost to the Govt. (b) The payment shall only be allowed after production of original GST purchase vouchers from Manufactures/Authorised dealers.

S&F GI bracket bend to shape in cold or hot 40mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, to fixing security light fittings into building complete including taking down the existing GI bracket all as specified and as directed.

Taking down of flame proof tube light fitting 36/40Watt and dismantling the fitting by unscrewing of all nuts and bolts to carryout repair/replacenment, including cleaning, reassembling the fitting after rectifiing the defects and re- fix in position including necessary electrical connection complete all as specified. Note:- (i) Quoted rate shall deemed to include for the accessories such as Bi-pin-holder, side stand for holders,hook up wire inside wiring of fittings and cord flexible twin core copper conductor from ceiling rose to fitting, connectors etc (ii) Fluorescent lamp and Electronic ballast 36/40 watts shall be measured separately as supply only under relevant items of this schedule.

Repairing to light fixture flame proof/ reccess/surface mounting/ Flourescent tube light any rating/ make/ model/ type in position including testing of serviceability of connected accessories, and wiring upto respective switch/control unit including replacing unserviceable items such as choke, capacitor, etc. and making light functional complete all as specified and as directed. Note:- (i) Quoted rate shall deemed to include for the accessories such as Bi-pin-holder, side stand for holders,hook up wire inside wiring of fittings and cord flexible twin core copper conductor from ceiling rose to fitting, connectors etc (ii) Fluorescent lamp 18/20/28/36/40 watts and Electronic ballast suitable for18/28/36 watts shall be measured separately as supply only under relevant items of this schedule:-

Supply only flourescent tube light 36W

Supply only flourescent tube light 28W T5

Supply only flourescent tube light 14 ( 2 Feet)

Supply only electronic ballast suitable for36/40 watts fluorescent lamp 240 volts 50 Hz, (Make: Bajaj/Havell's/phillips)

Supply only electronic ballast suitable for 28 watts T5 fluorescent lamp 240 watts 50 Hz, (Make: Bajaj/Havell's/phillips)

Supply only electronic ballast suitable for 18 watts fluorescent/CFL lamp 240 watts 50 Hz, (Make: Bajaj/Havell's/phillips)

Supply and fix in replacement of security light fittings LED luminaire new generation energy saving and environmental friendly long life versatile pressure die cast aluminium IP 65 protection road way luminaire with high power LED as light source with 25W LED 5000K lamp including disconnecting, removing and connecting into electric circuit and testing complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work shall inclusive of necessary earth work and PCC chamber 1:3:6 in type CI with 8mm CTD bar reinforcement both ways at 140 mm bents to centre complete all as specified and as directed including taking down old unserviceable earthing .

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes all as specified and as directed.

Supply and fix in repair laminated hylum sheet 3 mm thick as per the size required at site including cutting holes for fixing the switches/sockets etc and transfering all the switch/sockets including disconecting and reconnecting into electric circuit and testing all as specified and as directed.

S&F in replacement of Crystal glassLED tube light 18W (Double side connection) suitable to existing T8 fitting including modifying of existing elect connection to tube holders complete all as specified and as directed. Make : Havells cat part No : CRYSTAL 1213T8 DSTL 18W LEDS865 GLASS or other equivalent cat Part No of approved make as specified in particular specification .

S&F in replacement of Crystal glassLED tube light 20W (Double side connection) suitable to existing T8 fitting including modifying of existing elect connection to tube holders complete all as specified and as directed. Make : Havells cat part No : CRYSTAL 1213T8 DSTL 20 LED 865S GLASS or other equivalent cat Part No of approved make as specified in particular specification .

S&F in replacement of Crystal glass LED tube light 16W (Double side connection) suitable to existing T5 fitting including modifying of existing elect connection to tube holders complete all as specified and as directed. Make : Havells cat part No : CRYSTAL 1149 T5 DSTL 16W LED 865SG GLASS or other equivalent cat Part No of approved make as specified in particular specification .

NOTE for Ser No 27 to 29 : (a) LED light fitting of make/brand specified above if not available in the market, other equivalent make as specified in list of makes shall be provided without any extra cost to the Govt. (b) The payment shall only be allowed after production of original GST purchase vouchers from Manufactures/Authorised dealers.

S&F LED driver 36 watts all as specified and as directed.

S&F in replacement of CFL 36 Watts 4 pin type all as specified and as directed.

S&F in replacemnt LED 36 Watt recessed mounting fittings aesthetically designed 2' X 2' LED flat panel suitable to false ceiling including provision of suitable flexible PVC wire from ceiling rose to the fitting complete all as specified and as directed. ( NOTE : Make shall be BAJAJ cat No. BZRSQL 36W GZI WH or other equivalent cat Part No of approved make as specified in particular specification .

UNIVERSAL ENGINEERING

S.M.THIYAGARAJAN AND CO

SREE VENKATESWARAS CONSTRUCTIONS

Varsa Constructions