Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable. | |
| 2 | L2₹38.8 L+₹3.9 L (11.1%)Rejected-Finance A 3 257 JANAKPURI NEW DELHI 110058 | WEST DELHI | DELHI | 110058 | L2 | Rejected-Finance Being lowest tenderer | |
| 3 | L3₹39.8 L+₹4.9 L (14.1%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹40.6 L+₹5.7 L (16.3%)Rejected-Finance A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹42.6 L+₹7.7 L (22.1%)Rejected-Finance WZ 1000 NANGAL RAYA PANKHA ROAD SOUTH WEST DELHI DELHI 110046 | DELHI | SOUTH WEST DELHI | DELHI | 110046 | L5 | Rejected-Finance Being not lowest tenderer |
| Sl No | Description | Qty | Unit | mayur enterprises L5 | Commercial Traders L3 | Ridhi engineers and builders L4 | Vijaypower Generators Limited L7 | BRIJ MOHAN LAL AND CO. L6 | M/S ADHIKARI CONSTRUCTION CO. L2 | Mani Control System L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and installation, testing and commisioning of 11 KV/0.433 V,250 KVA Copper double wound step down Transformer out door type oil immersed complete with standard fittings, HT 11 KV 3 Phase, LT 433 Volts, 3 Phase 4 wire with off load tapping on HT side to vary secondary voltage within limit complete all as specified and directed
Note:- 1:- The Transformer shall be complete with standard fittings all as specified conforming to IS: 1180 (part-I) 2014 BIS Level II- 4 Star and manufacturer shall hold licence/certificate from BIS to this effect.
2:- The Transformer will have its initial oil filling to appropriate level ( Cost of oil including testing with desired dielectric strength is included) | 1 | Each | 11,50,000 ₹11,50,000 | 7,88,486 ₹7,88,486 Lowest | 9,25,000 ₹9,25,000 | 13,80,000 ₹13,80,000 | 12,89,595 ₹12,89,595 | 7,99,999 ₹7,99,999 | 7,89,860 ₹7,89,860 |
| 2.00 | Supply and installation, testing and commisioning of 11 KV/0.433 V,200 KVA Copper double wound step down Transformer out door type oil immersed complete with standard fittings, HT 11 KV 3 Phase, LT 433 Volts, 3 Phase 4 wire with off load tapping on HT side to vary secondary voltage within limit complete all as specified and directed
Note:- 1:- The Transformer shall be complete with standard fittings all as specified conforming to IS: 1180 (part-I) 2014 BIS Level II- 4 Star and manufacturer shall hold licence/certificate from BIS to this effect.
2:- The Transformer will have its initial oil filling to appropriate level ( Cost of oil including testing with desired dielectric strength is included) | 1 | Each | 11,00,000 ₹11,00,000 | 7,46,396 ₹7,46,396 | 8,50,000 ₹8,50,000 | 11,30,000 ₹11,30,000 | 12,09,899 ₹12,09,899 | 6,99,999 ₹6,99,999 Lowest | 7,29,680 ₹7,29,680 |
| 3.00 | Taking down/dismantling and refixing of any capacity of stabilizer/LT equipments/transformer by using hydra machine/suitable crane complete and including transpotation shifting to safer place and provide the uninterrupted power supply to users by giving electrical connection to electrical equipment by providing temp plateform at his own arrangement and refixing the LT equiptment on the same place after repairing of plateform of transformer and stabilizer and other electrical equiptment.
(Note:- Dismantling and disconnecting HT Cable and LT Cables and refixing after necessary repair works and transportation of existing place to temporary site for commissioning of electrical equipment will be paid as one job. | 1 | Each Job | 25,000 ₹25,000 | 15,000 ₹15,000 | 9,000 ₹9,000 | 15,000 ₹15,000 | 4,995 ₹4,995 | 9,999 ₹9,999 | 500 ₹500 Lowest |
| 4.00 | Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for indoor/outdoor type termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 to 120 sqmm, 3core ISI marked complete all as specified and directed | 2 | Each | 2,500 ₹5,000 | 2,500 ₹5,000 | 3,500 ₹7,000 | 6,000 ₹12,000 | 3,499 ₹6,998 | 4,999 ₹9,998 | 2,000 ₹4,000 Lowest |
| 5.00 | Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm ISI marked complete all as specified and directed | 1 | Each | 8,000 ₹8,000 | 9,000 ₹9,000 | 4,500 ₹4,500 | 4,500 ₹4,500 | 9,999 ₹9,999 | 4,999 ₹4,999 | 4,000 ₹4,000 Lowest |
| 6.00 | Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor type termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm,3core ISI marked complete all as specified and directed | 3 | Each | 2,500 ₹7,500 Lowest | 2,500 ₹7,500 Lowest | 3,500 ₹10,500 | 4,500 ₹13,500 | 3,999 ₹11,997 | 4,999 ₹14,997 | 3,500 ₹10,500 |
| 7.00 | Supply and installation of 11KV, 630 A,20kA/3-sec, Outdoor load break switch suitable of Ring main Unit comprising of one incomimg two out going 3Nos fixed type SF 6 filled all as per BoM encl. | 2 | Each | 5,75,000 ₹11,50,000 | 7,60,000 ₹15,20,000 | 5,95,000 ₹11,90,000 | 8,80,000 ₹17,60,000 | 7,69,999 ₹15,39,998 | 7,99,999 ₹15,99,998 | 3,75,000 ₹7,50,000 Lowest |
| 7.0101 No. Incoming Load Break Switch module consisting of following accessories: 11 KV, 630A Load break switch module and integrated earthing switch, both with full making capacity. Short time current- 20kA/sec, making capacity-50kAp Auxiliary contacts - 01NO+1NC Spring assisted snap action mechanism driven via shaft that remains un-inhibited after motorization, if required in future. Cable boxes with double door arrangement for enhanced safety (IP54+IP3X) interlocked to prevent access to 3Cx300sqmmXLPE AL cable termination in live condition, Right angle boots(push on type) Suitable site replaceable cable bushing situated not beyond 300 mm from cable cover to allow ease of access for installation/testing/replacement purpose. Arc proof cable covers with self interlocking mechanism with earth switch capacitive voltage indication fixed type system as per IEC 61243 (complete all as specified and directed) | ||||||||||
| 7.0202 No. Outgoing SF6 module consisting of following accessories: 11 KV, 630A Fixed type SF6 module with series disconnector cum earthing switch of making capacity. Short time break current/withstand-20kA/3 Sec, making capacity- 50kAp Auxiliary contacts - 01 NO+1NC Stored Energy spring mechanism with integrated manual spring charging handle to prevent theft at site and mechanical life of 5000CO operations achieved using single high endurance mechanism or multiple mechanism supplied as spare. Cable boxes with double door arrangement for enhanced safety (IP54+IP3X) interlocked to prevent access to XLPE AL cable termination in live condition, Right angle boots(push on type) Suitable Site replaceable Cable bushing situated inside cable cover to allow ease of access for installation/testing/replacement purpose. 2O/C + 1E/F self powered numerical protection relay with low and high set for over current and earth fault. Relay should have facility to diplay the maximum facility to display the maximum loaded face current also. Relay should record minimum 5 fault records with time stamping. Associted ring core cast-resin insulated CTs of appropriate ratio. Arc proof cable covers with self interlocking mechanism with earth switch Capacitive voltage indication fixed type system as per IEC61243 | ||||||||||
| 7.03Note:- (i) Each cable boxe will have capacitive voltage LED indication to indicate cable live condition inside the cable box. (ii) Necessary interlocking arrangement shall be provided for safety and operations. (iii) One No. Operating Handle for Manual isolator/Disconnector/Earthing Operation and one No. manometer shall be proveded. (iv) Above switch gear shall confirm to relevant IEC(6227-200) for design, manufacture and internal arc compliances. (v) Foundation PCC for the installing the outdoor RMU as per manufactur of the drawing 1 mtr above the ground level will be installed as work site by tenderer and the cost of the same deem to be included in rates quoted and nothing extra on this account will be admissible. | ||||||||||
Tender Value
₹40.0 L
EMD Value
₹80,000
Closing Date
19 Dec 2025, 6:00 pmClosed
CWE (AF) Tughlakabad
HQ CWE AF TUGHLAKABAD AF STATION, TUGHLAKABAD PO SANGAM VIHAR NEWDELHI-110080
PROVISION OF TRANSFORMER ALONGWITH HT CABLE AND OTHER ALLIED WORKS FOR AIRMEN MESS AND MADHUR MILAN MAP QTRS AT 13 BRD UNDER GE (AF) GURGAON NO.1
2025_MES_742631_1
CWE/TKD/GUR/TOKEN-52 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) Gurgaon No 1
as per tender condition
7 documents required · 7 mandatory
₹0
₹80,000
6 Feb 2026
3 Dec 2025
22 Dec 2025
3 Dec 2025
19 Dec 2025
13 Dec 2025
Supply and installation, testing and commisioning of 11 KV/0.433 V,250 KVA Copper double wound step down Transformer out door type oil immersed complete with standard fittings, HT 11 KV 3 Phase, LT 433 Volts, 3 Phase 4 wire with off load tapping on HT side to vary secondary voltage within limit (complete all as specified and directed) Note:- 1:- The Transformer shall be complete with standard fittings all as specified conforming to IS: 1180 (part-I) 2014 BIS Level II- 4 Star and manufacturer shall hold licence/certificate from BIS to this effect. 2:- The Transformer will have its initial oil filling to appropriate level ( Cost of oil including testing with desired dielectric strength is included)
01 No. Incoming Load Break Switch module consisting of following accessories: 11 KV, 630A Load break switch module and integrated earthing switch, both with full making capacity. Short time current- 20kA/sec, making capacity-50kAp Auxiliary contacts - 01NO+1NC Spring assisted snap action mechanism driven via shaft that remains unhibited after motorization, if required in future. Cable boxes with double door arrangement for enhanced safety (IP54+IP3X) interlocked to prevent access to 3Cx300sqmmXLPE AL cable termination in live condition, Right angle boots(push on type) Suitable site replaceable cable bushing situated not beyond 300 mm from cable cover to allow ease of access for installation/testing/replacement purpose. Arc proof cable covers with self interlocking mechanism with earth switch capacitive voltage indication fixed type system as per IEC 61243 (complete all as specified and directed)
Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm (complete all as specified and directed)
(a) MCCB four pole 320 Amps, 36 KA at 415 Volts.- 01 Nos . (b) MCCB four pole 250 Amps, 25 KA at 415 Volts- 02Nos . (e) Spare Box suitable for fixing of 100 Amps 25 KA MCCB - 01Nos .
(a) MCCB four pole 320 Amps, 25 KA at 415 Volts.- 03 Nos . (b) MCCB four pole 160 Amps, 25 KA at 415 Volts- 03Nos . (e) Spare Box suitable for fixing of 200 Amps 25 KA MCCB - 01Nos .
M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.
Supplying and laying reinforced precast concrete cable cover, Class HV, Type I, flat, size 300 mm x 180mm x 40mm → as perpendicular to the direction of underground cable complete all as specified and as directed.
M&L for brick protection with sub class 'B' Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundtion of PCC for Transformer plateform/ poles/struts as specified including necessary form work all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundtion of plateform of Transformer/stay assembly etc including necessary form work , all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles/Transformer plateform top surface , including necessary form work finishing even and smooth without using extra cement , all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tender_condition.pdf
Tender Documents • 2.34 MB
BOQ_831596.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .