Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
30 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (AF) PALAM DELHI CANTT 10
GE (AF) PALAM DELHI CANTT 10
PROVN OF EARTHING AT AFNET SITE I and II AT 3 WG AND PROVN OF GEYSERS IN CERTAIN SMQs AT 3 WING UNDER GE (AF) PALAM DELHI CANTT-10
2026_MES_797977_1
8026/A/T-73/E8
Open Tender
Civil Works
Item Rate
90 days
GE (AF) PALAM DELHI CANTT 10
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) PALAM DELHI CANTT 10
₹97,000
Yes
9 Nov 2026
9 Nov 2026
7 Dec 2026
9 Nov 2026
30 Nov 2026
23 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing & commissioning of maintenance free earth (grounding) Elancrete electrode of size100mm Dia x 30.5 Mtr long with 17.2 mm Cu bonded MS conductor precast or cast-in-situ cast in high purity electrically conductive granular material having ultra low resistive value of 0.001 Ohm-m. Electrode made of conductive earth enhancing material mixed with cement in the ration (3:1) to achieve result of earth resistance less then 1 Ohm encase or backfill the voids surrounding the 17.2mm Cu bonded MS conductor or other metal components placed in augured bore hole of 100mm dia x 30.5 Mtr depth, resulting to increase in the effective surface area of the earth electrode or grids to lower the resistance. Earth enhancing material should not leach chemicals into the adjascent soil or underground water channels and should be in pH neutral range. Earth enhancing material should permanently protect the encased metal components of the earthing systems, copper bonding on MS rod should be minimum 250 microns. All hardware like nuts, bolts and washers should be of SS. Electrode should withstand fault current upto 35 kA for 1 second. Electrode's top terminal be sealed permanently packed with conductive concrete and Cu bonded MS / copper strip taken out be terminated on to earth test point and equipment terminal. Test certificate of NABAL laboratory shall be submitted by the contractor, test link of size 50 mm X 6 mm X 200 mm, RCC pit cover including brazing of all the joints upto test point complete all as specified and as directed by Engr-in-Charge. Make:- Elancrete/Marconite/SN Engineering.
Note:- (i) The maintenance-free earthing shall provide an earth resistance of less than 1 Ω. In case the required earth resistance is not achieved, the contractor shall execute new maintenance-free earthing at no extra cost to the department until the specified value is obtained. (ii) Desired Earth Pit Resistance of less than 1 ohm in case the resistance value increases above 1ohms during the guarantee period the necessary maintance shall be carried out without any extra cost for a period of 3 Years. | 12 | Each | - | - |
| 2 | M&L of test point terminal block made of gun metal or phosphorus bronze size (75 x 75 x 25)mm drilled and screwed including 3 nos. 8 mm dia 25mm long hexagonal head screw complete all as specified and as directed. | 12 | Each | - | - |
| 3 | M&L for copper strip (20 x 3.15)mm with saddles and fixing screws and joints with brazing including porcelain holder insulator for separation of strip as required at site etc for roof conductor, down conductor above ground complete all as specified and as directed. | 170 | RM | - | - |
| 4 | M&L for GI pipe medium grade 40mm dia complete with all fittings and welding works complete all as specified and as directed. | 130 | RM | - | - |
| 5 | Supply, fixing, connecting and testing energy efficient BEE 5 star rated electric water heater, vertical storage type of 25 Ltrs capacity with stainless steel inner tank, brass assembly, pressure release valve, heating element 2 KW complete with all accessories with high quality external finishes single phase with working voltage 240 volts 50 Hz ISI marked complete all as specified and as directed. Note:- The cost of NRV, stud / nuts / fasteners, bolts, washers and making good the disturbed surface to match with the existing surface shall be deemed to be included in unit rate. | 145 | Each Job | - | - |
| 6 | Supply, fixing, connecting and testing energy efficient BEE 5 star rated electric water heater, horizontal storage type of 25 Ltrs capacity with stainless steel inner tank, brass assembly, pressure release valve, heating element 2 KW complete with all accessories with high quality external finishes single phase with working voltage 240 volts 50 Hz ISI marked complete all as specified and as directed. Note:- The cost of NRV, stud / nuts / fasteners, bolts, washers and making good the disturbed surface to match with the existing surface shall be deemed to be included in unit rate. | 20 | Each Job | - | - |
| 7 | S&F GI tubes 20mm bore 'medium grade' fixed on wall including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, nipple, elbow and union of required size including fasteners, bolts, washers making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. | 500 | RM | - | - |
| 8 | S&F GI tubes 15mm bore 'medium grade' fixed on wall including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, nipple, elbow and union of required size including fasteners, bolts, washers making good the disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. | 750 | RM | - | - |
| 9 | S&F stop valve fancy type cast copper alloy chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge. | 330 | Each | - | - |
| 10 | S&F PVC connection 15mm size with brass nuts of length upto 600mm suitable for Hot / Cold water supply complete all as specifed and as directed. | 330 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
tender.pdf
Tender Documents • 0.71 MB
BOQ_895160.xls
BOQ • 0.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .