Loading…
Loading…
Tender ID
Tender Value
₹90.6 Cr
EMD Value
₹46.8 L
Closing Date
26 Feb 2026, 11:00 amClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
RSP
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- B-2(d) - Any "Railway/Metro/Road Bridge work having steel / Composite / Bowstring girder and/or PSC girder in super structure".
25 conditions · 11 needing a document upload
For the tender value above Rs.20.0 crores, the tenderers should submit Bid capacity statement in the prescribed proforma (As per GCC) duly verified by Chartered Accountant. In case, the tenderer/s failed to upload Bid Capacity Proforma along with offer, their /his offer shall be considered as incomplete and will be rejected summarily
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)10% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Guntur Division: GNT-KCC- Construction of 4-lane ROB in lieu of LC No.14 at km 19/7-9 between Namburu - Mangalagiri stations
CONST-CAO-RSP-26-002
CONST-CAO-RSP-26-002
Open
Works - General
18 Months
Unknown (Unspecified Location)
₹0
₹46.8 L
26 Feb 2026
4 Feb 2026
166 items across 9 schedules · ₹91,40,23,520.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Exploratory drilling of boreholes down to required depth, drilling of 150mm dia. boreholes in all type of soils except hard rock & large boulders (boulder core more than 30cm) including refilling, reinstating surface and disposing off surplus material including use of mechanical rigs with power operated winches as well as percussion/chiselling tool for advancing through occasional seams of hard strata to be employed, where necessary in Dry area. | — | — | — | — | |
| 1 | 0m to 10m | Metre | 230.00 | 1,065 | 2,44,950 |
| 2 | 10m to 20m | Metre | 230.00 | 1,118.52 | 2,57,259.6 |
| 3 | 20m to 30m | Metre | 230.00 | 1,177.39 | 2,70,799.7 |
| 4 | 30m to 40m | Metre | 230.00 | 1,277.73 | 2,93,877.9 |
| 5 | Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720. | Each | 69.00 | 137.81 | 9,508.89 |
| 6 | Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge | Each | 230.00 | 802.76 | 1,84,634.8 |
| Conducting laboratory Tests on collected soil samples as per relevant IS code | — | — | — | — | |
| 7 | Moisture Content/Dry Density | Each | 69.00 | 267.59 | 18,463.71 |
| 8 | Atterberg Limits | Each | 69.00 | 535.18 | 36,927.42 |
| 9 | Specific Gravity | Each | 69.00 | 535.18 | 36,927.42 |
| 10 | Grain size analysis including Hydrometer analysis | Each | 69.00 | 735.87 | 50,775.03 |
| 11 | Direct Shear Test | Each | 69.00 | 2,006.91 | 1,38,476.79 |
| 12 | Natural Density | Each | 69.00 | 602.07 | 41,542.83 |
| 13 | Consolidation Test | Each | 69.00 | 6,689.69 | 4,61,588.61 |
| 14 | Unconfined Compression Test | Each | 69.00 | 2,006.91 | 1,38,476.79 |
| 15 | Tri-axial Test | Each | 69.00 | 2,006.91 | 1,38,476.79 |
| Conducting Laboratory tests on collected ROCK SAMPLES as per relevant IS code | — | — | — | — | |
| 16 | Density Test | Each | 69.00 | 267.59 | 18,463.71 |
| 17 | Water Absorption & Porosity | Each | 69.00 | 267.59 | 18,463.71 |
| 18 | Hardness | Each | 69.00 | 133.79 | 9,231.51 |
| 19 | Unconfined Compression Test | Each | 69.00 | 2,006.91 | 1,38,476.79 |
| 20 | Point Load Test | Each | 69.00 | 1,070.35 | 73,854.15 |
| 21 | Modulus of Elasticity | Each | 69.00 | 5,351.75 | 3,69,270.75 |
| 22 | Abrasion Testing | Each | 69.00 | 602.07 | 41,542.83 |
| 23 | Conducting chemical analysis of ground water samples to determine suitability for c o n c r e t i n g and aggressiveness in relation to attack on concrete / reinforcement including determination of pH value. | Each | 69.00 | 1,337.94 | 92,317.86 |
| Schedule total | ₹30,84,307.59 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument01-01-2025.pdf
RevisedlistofApprovedBrands.pdf
JVAgt.pdf
JVMOUFormat.pdf
GCC2022ACS10.pdf
DLPDT.29.12.2025_1.pdf
Mastertenderbooklet1.pdf
Mastertenderbooklet2.pdf
SpecialConditions14.pdf
LC14NOC.pdf
LC14GAD.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .