Providing, Supplying, Erection, Testing and Commissioning of Pole and Light at Nathu Baba Mandir Ward 63.File No.73/26X6/4.

Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire. (EARTHING OF PER POLE LT & HT)

Supplying, drawing and testing of XLPE insulated covered aluminium conductor of approved make, stringing,makingoffcompletewithbindingatexisting insulator, jointing, jumpering, tearingoff, connecting etc. as required and clearing of obstacles (if any) etc 70 Sqmm XLPE 11KV grade

Supplying and erection of galvanised stay set for 11kV overhead line complete with 19/20mm dia x 1.8 meters long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mmx 600mm), 7/4.00mm dia G.I. stay wire and 11kV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40mm. nominal size) foundation including excavation and refilling etc. as required. (FOR HT END POLE & TRIANGLE)

Supplying of 50mmx 8mm M.S. Flat iron pole top bracket/cross arm for single 11/22/33kV overhead line conductor complete with fixing bolts, nuts and washers drilling holes for insulator pins, painting with primer and finish paint as required. top clamp (FOR OVERHEAD LINE)

Erection of stay set complete (Galvanized) in cement concrete1:3:6(1Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6graded stone aggregate 40mm nominal size) foundation,base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.) (ERECTION OF LT POLE)

Painting of poles Prima coat over new steel and other metallic surface with red oxide zinc chromide paint complete with supply of material labour etc. including preparation of surface.

Painting of poles Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250 mm withclamp on existing HT/LT structure/ poles

M.S. Nuts and Bolts