PROVISION OF PAVEMENT PLATFORM BEHIND BUILDING NO. P 177, WATER SUPPLY IN WASH ROOM OF SRE BUILDING AND CERTAIN REVENUE AND MINOR WORK AT AF STATION TAMBARAM

Amount

Excavating in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out in hard/dense soil complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L Precast cement concrete block masonry with solid blocks type C1 (1:3:6) using 20mm graded stone aggregate , exceeding 10 cm in width and setting in mortar 1:6 complete all as specified and as directed

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M&L for hardcore with broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate, 75mm thickness as in sub base floor complete all as specified and as directed

M&L for screed bed or bedding layer of cement mortar 20 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and as directed

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors complete all as specified and as directed

Removing excavated material of soil to a distance exceeding 250 meter but not exceeding 500 meter and depositing where directed at a level not exceeding 1.5 meter complete all as specified and as directed

S&F in repairs rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position of height exceeding 24 meter and not exceeding 27 meter all as specified in SSR Part I complete all as specified and as directed

S&F in repairs 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified ans as directed

S&F in repairs 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 40mm bore all as specified and as directed.

S&F 3-layer PPR polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stablised and antimirobial fushion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed Outer diameter of the pipe is 25mm complete all as specified and as directed

All as per item No.15 above but outer diameter of the pipe is 40mm , fixed at a height not exc 7.50m complete all as specified and as directed Note: (a) The contractor shall make propper and necessay scaffolding work including staging etc., to fix the pipe line in the external walls etc, since the work shall be carried out in high raised structure. The rate quoted by contractor deemed to include in the above lumpsum rate (a) The contractor shall make proper and necessary safety arrangements as per standard Engineering practise since work shall be carried out in high raised structure

All as per SI item No. 16 above but height exeeding 7.50m but not exceeding 15m.

All as per SI item No. 16 above but height exeeding 15m but not exeeding 18m.

All as per SI item No. 16 above but height exeeding 18m but not exeeding 21m.

All as per SI item No. 16 above but height exeeding 21m but not exeeding 24m

All as per SI item No. 16 above but height exeeding 24m but not exeeding 27m

S&F 3-layer PPR P o l y p r o p y l e n e random copolymer concealed pipes SDR 7.4 (PN 16) UV stablised and antimirobial fushion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed Outer diameter of the pipe is 50mm complete all as specified and as directed

S &F in repairs vitreous china wash basins angle back,size 600mmx480mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene fush pipe, PVC connections 15mm size with PTMT nuts of length 600 mm, waste pipe screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,flush pipe 600mm long, grating and Union for discharge pipe etc complete all as specified and as directed

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed

S&F tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F in repairs Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repairs Pillar taps 15mm bore, cast copper alloy, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs Stop valves 15mm bore, cast copper alloy,fancy type, chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

S&F waste pipe including coupling of PTMT 32mm dia bore for WHB complete all as specified and as directed

Taking down cement or cement lime plaster, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed

M&L for brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified

M&L for preparation of new surfaces of walls and applying three coats of white wash complete all as specified

M&L for complete removal of exiting treatment and applying three coats of white wash on walls complete all as specifed and as directed

M&L for complete removal of exiting treatment and applying three coats of white wash on ceiling complete all as specifed and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed and as directed.

BLANK

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as in backing coat of Skirting/Dado etc complete all as specified and as directed

S&F Joint free glazed ceramic tiles in vertical surface 300x 450x 7mm/ 350X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame complete all as specified and directed

S&F Aluminium anodised,125mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, 100mm thickness as in staging for water tank and the like etc., including necessary formwork complete all as specified and as directed

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thickness as in floor finishes including necessary formwork complete all as specified and as directed

M&L for cement concrete 1:3:6, type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brickwork/stone masonry or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping and the like etc including necessary formwork all as specified and directed

M&L for plain cement cement concrete 1:2:4 , type B1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and as directed

M&L for reinforced concrete pipes, class NP3, 300mm dia laid and jointed complete with collars etc complete all as specified and as directed

M&L for concrete bed to drain pipes 300mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested, complete all as specified and as directed

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified

M&L for brickwork with fly ash bricks in one brick thick honeycomb walling, built in cement moratar cement mortar 1:4 complete all specified and as directed

M&L for loose filling with broken bricks bats of gauge 80 to 150 mm in soakage pits, soakage wells and the like etc., complete all as specified and as directed

M&L for reinforced cement concrete 1:2:4 , type B1, using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. NOTE: Reinforcement and form work shall be measured and paid separately under relevant item.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished complete all as specified.

M&L for RCC 1:1.5:3 type A1 using 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compplete all as specified and as directed. NOTE: Reinforcement and form work shall be measured and paid separately under relevant item.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick fair finished complete all as specified and as directed

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor ,sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,fair finished complete all as specified and as directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F TMT steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per Sl.item No. 67 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 150mm including necessary excavation if required complete all as specified and as directed

S&F 150mm dia salt glazed stoneware drain pipes laid in trenches and joints as specified complete all as specified and as directed

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, type C2 using 40mm graded stone aggregate for 150mm dia pipes complete all as specified and as directed

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 150mm dia as required

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate , 25mm thickness as in floor finishes etc complete all as specified and as diretced

M&l for screed bed or bedding layer of mortar 15 mm in cement mortar 1:6, thick for laying floor finishes complete all as specified and as directed

S&F Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

S&F aluminium alloy, anodised,sliding door bolt of 150mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S &F in repairs vitreous china water closet Squatting Orissa patern white size 580mm x 440mm with integral foot rest with P or S trap including, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified (excluding cost of flush tank) including provision of lime concrete bedding fixed in repairs

S&F in repairs PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed

Taking down GI steel tubing and connections, 15mm bore including cleaning for refixing or removal to store all as specified and as directed

Taking down GI steel tubing and connections, 25 or 32mm bore including cleaning for refixing or removal to store all as specified and as directed

S&F GI tubes medium grade galvanised with all fitting concealed in walls and fixed complete to walls and ceilings or laid in floors 15mm bore all as specified and as directed

S&F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore all as specified and as directed

M&L for preparation of old surfaces and applying one coat of white wash on walls complete all as specified and as directed

M&L for preparation of old surfaces and applying one coat of white wash on ceiling complete all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove duest etc complete all as specified and as directed

M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, 75mm thickness as in plinth protection and the like etc., finishing even and smooth without extra cement complete all as specified and as directed

S&F in repairs Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

S&F in repairs CP health faucet with hose & hook including all necessary fittings complete all as specified and as directed (Make: Parryware, Model: T9941A1or other equivalent as approved by GE)

S&F in repairs chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

Refixing old steel tubing and connections obtained from taking down in new or old position (Walls, ceiling,floors, etc.) of size 15mm bore all as specified and as directed

Refixing old steel tubing and connections obtained from taking down in new or old position (Walls, ceiling,floors, etc.) of size 25mm bore all as specified and as directed

M&L for brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, as in kerb stone etc., built in cement mortar 1:4 complete all as specified and as directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L for machine pressed rubber moulded precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed

Taking down Shutters of any description n exc 1 sqm each and refixing in same opening after easing and adjusting the shutters complete all as specified and as directed

S&F Powder coated aluminium anodised window sliding shutter shutters without sash bars, aluminium section 45.2 x 35 x 1.30mm (for frame, Jindal section No. 20664) and 37.5 x 15 x 1.60mm (for shutter, Jindal section No. 20597) of make JINDAL or equivalent including rubber packing anodised aluminium snap beading etc, with 4mm thick plain glass including necessary locking arrangement and all fittings such as hinges, handles, stays etc, complete all as specified and as directed. Note :- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S&F Aluminium anodised grills (Pattern DG-104) bull nosing and polishing of edges 10mm thick with weight not less than 2.5 Kg/sqm for windows, ventilators etc., including 'F' section of size 23.4 x 15.3 x 1.4mm thick, joining cleats etc., complete all as specified and as directed

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Linoleum, plain coloured,3.20/3.30mm thick laid and sealed down with an approved adhesive in floors including stretching, cutting and fitting etc., complete all as specified and as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brickwork/stone masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab set in cement mortar 1:4 including necessary formwork required complete all as specified and as directed. NOTE:Reinforcement shall be measured and paid separately under relevant item

M&L for precast cement concrete louvres and jallies with cement concrete 1:3:6 , type C0 using 12.5mm graded stone aggregate ,set in cement mortar 1:6, 50mm thick (measured solid), including all mouldings and frame complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed

RAVI ENTERPRISE

Raju Builders

kcs builders

vrk constructions