CERTAIN B/R MAINT WORKS FOR TOILETS SUNKEN TREATMENT AND PLUMBING WORKS ETC AT 7 AFH KANPUR CANTT

Amount

S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down existing pipes and connection complete all as specified and directed.

Taking down existing pipes and connection and Re fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors after cleaning complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down existing pipes and connection complete all as specified and directed.

Taking down existing pipes and connection and Re fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors after cleaning complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair bib tap 15 mm bore fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete.

S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange complete all as specified and directed.

S&F in repairs fancy type chromium plated angle cock 2-way double handle with flange complete all as specified and directed.

S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed.

S&F in repair jet spray (butterfly) with 1 mtr felexible tube complete all as specified and directed.

S&F in repair chromium plated overhead shower multiflow of 75 mm size complete all as specified and directed.

S&F in repairs brass chromium plated grating of size 127 mm dia complete all as specified and directed.

S&F in repairs brass chromium plated towel rail of 450 mm long complete all as specified and directed

S&F in repairs health faucet cock brass chromium plated including 1M long flexible pipe complete all as specified and directed

S&F in repair wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper size connecting legs & wall flange, fixed with 15 mm GI pipe complete all as specified and directed. Make : Cat No FLR-CHR-5273UPR of Jaquar or equivalent of make as mention in Appx of PS.

S&F in repair cabinet mirror of size (500x400) mm Cat No 556 of make Prayag or equivalent in Cera or Essco.

S&F in repair toilet paper holder of Chromium plated complete all as specified and directed.

S&F in repair corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent in Cera/Essco.

S&F in repairs chromium plated soap dish complete all as specifed and directed.

S&F in repairs PVC waste pipe 32 mm dia, 800 mm long, complete all as specified, Cat No 3271, Make Prayag or equivalent make as specified in Appx of PS.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repair PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to WC including PVC flush pipes ,brackets complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair one piece wall hung snow white extended with PP Seat cover and twin flush fittings of size EWC (655x365x755)mm, Cat No S1031103 P/S trap, comprising of cistern Cat No S1060103, campbell soft close seat cover Cat No B 1520106, twin flush fittings Cat No B 1810106 of Campbell model of Cera or equivalent in Jaquar, Kohlar complete all as specified and directed.

S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin oval type white size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa ' pan pattern size 580x440mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) including making good to disturbed surface complete all as specified and directed.

S&F in repair plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device complete all as specified and directed.

S&F in repair brass CP waste coupling of size 32 mm dia for WHB with long screwed shanks and fly nut complete all as specified and directed.

All as per item No 32 here-in-before but 40mm size.

S&F in repair stainless steel kithen plate rack size 600X750X250 mm including all screws and fitings complete all as specified and directed. Make- Prayag Cat part No P-330 or equivalent of make specified in PS.

S&F in repair 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and as directed. Make Prayag cat No 1231 or or equivalent of make specified in PS.

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and as directed. Make Prayag cat No 1311 or equivalent of make specified in PS.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and as directed.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and as directed.

S&F in repair rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position complete all as specified and as directed.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F in repair 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms) complete all as specified and as directed.

S&F in repair 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 25mm-455 gms) complete all as specified and as directed.

S&F lid for PVC tank for 500/1000 ltr capacity of tank with complete arrangements of fixing with existing tanks like as nuts and bolts, hasp and staple etc complete all as specified and directed.

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L 25mm thick cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor complete all as specified and as directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified

M&L Coloured Glazed digital ceramic tiles (300x450)x7 mm thick or as required size of 7 mm thick on vertical surface as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed..

M&L vitrified double charge/ultra charged digital ceramic coloured tiles 10 mm thick (square/ rectangular), light shade area of each tile exceeding 0.36 sqm but n exc 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, shade/coloured over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L for 16-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillers, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed.

M & L Brick work with fly ash bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc.complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete masonary of wall in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonary of wall in CM (1:4) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish even annd smooth without using extra cement complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over and including a coat of primer and 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of cement based paint over and including a coat of primer complete all as specified and directed.

M&L for preparation of surfaces and applying three coats of white wash on ceilings, all as specified and directed.

S & F in repair cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S & F in repair 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors complete all as specified and directed.

Ditto all as per item No.67 here-in-before but for 100 mm bore.

S&F in repair CI bends 100 mm dia complete all as specified and directed.

All as per item No 69.00 here-in-before but 75 mm dia.

S&F in repair CI branch piece,single (single Y) equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 71.00 here-in-before but 75 mm dia.

S&F in repair CI single T equal or unequal 100 mm dia complete all as specified and directed.

All as per item No 73.00 here-in-before but 75 mm dia.

M&L 32 mm galvanised tubing medium grade as in spout pipe each 70 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC 1:2:4 tpe B-1 making god the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified and directed.

Taking up asbestos cement pressure pipes, 100/75 mm (including all fittings), including disconnecting pipes and fittings complete all as specified and directed.

S&F PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete all as specified and directed.

All as per item No 77.00 here-in-before but 75 mm dia.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

All as per item No 79.00 here-in-before but 75 mm dia.

S&F PVC (SWR) branch piece,single (single Y) equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 81.00 here-in-before but 75 mm dia.

S&F PVC (SWR) single T equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 83.00 here-in-before but 75 mm dia.

S & F in repairs 450 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

S & F in repairs 600 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of white wash complete all as specified.

All as per item No 89 here-in-before but on ceiling.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over and including a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of wall including filling wall care putty wherever required and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 93 here-in-before but applying on steel surfaces.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 95 here-in-before but applying on steel surfaces.

M&L preparing old plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L preparing old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment of wall preparing the surface and applying two coats of exterior emulsion weather proof paint with anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish complete all as specified and directed.

M&L for preparing the surface and applying one coats of exterior emulsion weather proof paint with anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish compete all as specified and directed.

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor compete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 Mixed with and including water proofing compound on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for providing and applying two component cementitious elastomeric water proofing coating Damp Block 2K manufactured by M/s Asian paints Ltd or equivalent product of Sika, Fosrock, Berger, Shalimar in two coats @1.4 kg/sqm to build 1.00 mm thickness as per manufacturers specification. The first coat shall be applied @ 0.7 kg/sqm and while 1st coat still green the second coat shall be applied with a suitable and stiff brush @ 0.7 kg/sqm. The treatment shall be carried out both horizontal and vertical surface as per site requirement. Substantially curing to be done by ponding for 48 hours compete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection finish even and smooth without using extra cement with construction joints complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) including cutting holes for taking out hold fast complete all as specified and directed.

All as per item No 105 but exc 1.5 sqm but n.exc 4sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exec 2 sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors , plateform and similar work including cutting to shape, drilling holes, fixing clips, screw required. complete all as specified and as directed.

M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter including guard bare of 10mm MS square bar frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame will be measured and paid separately.

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

S&F SS wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F Butt Hinges medium weight SS 100mm long complete all as specified.

S&F 200 mm long Barrel tower bolt aluminium anodized of extruded section complete all as specified.

S&F Aluminum anodized sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

All as per item No 120 above but 250 mm long.

S&F 150 mm handle extruded aluminium anodized fabricated type complete all as specified.

S&F in repair 250mm size mild steel door springs, all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod incl brackets, decorative finials at both ends complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

S&F in repairs MS galvanized wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

Taking down easing and adjusting wooden shutters of any description n.exc 1 sqm each refixing in same opening, all as specified and as directed.

All as per items 126, here-in-before, but exc 1 sqm and n.exc 2 sqm each refixing in same opening.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F tinted glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified.

M&L for PCC (1:3:6) type B1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

S&F in repair Aluminum anodized sliding door bolts of 250mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair door bottom seal with alluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications including 35 mm PVC cover fillets and corner complete all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F in repair vitreous china pedestal for wash hand basin of required size and colour including fixing bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified.

Note:- (1)-Cost for all taking down/refixing internal electrification as per site requirement is deemed to be included in quoted rates. (2) all painting/distempering/ preparation/removal/white wash etc works will be carried out after proper covering of doors/windows/ventilators/ glasses/all type bath fittings & electric fittings etc.also cleaning of splashes will be done by contractor . (3) Measurement will be done after complete removal of debris of related item. (4) Rate included for necessary scaffolding and arrangments for working upto 20m height)

M/S K.P. ENTERPRISES

M/S MAA TARA TREATMENT PROJECT