Operation and Maintenance of E and M Installation including Central AC Plant at Meteorology Centre and PSD Building at ITR, Chandipur, CCE(R and D)E/ENQ-102/OM/BLS/2021-22

Amount

OPERATION AND MAINTENANCE OF E&M INSTALLATION INCLUDING CENTRAL AC PLANT AT METEOROLOGY CENTRE & PSD BUILDING AT ITR, CHANDIPUR FY 2022-23 Scope of Work as per Part-III, at Para 4.1 Payment terms as per clause 5.19.1. Vendors are required to enter amount which is more than the minimum wages + GST (i.e. Rs 3,09,845.82) for the bid to be classified as responsive. Payment will be made on Prorate basis as per Manpower deployed at site, based on presence / absence report during the month. Manpower will be provided as given below :- (i) Supervisor (Highly Skilled) - 01 (ii) AC Plant Operator (Skilled) - 03 (iii)DG Operator (Skilled) - 03 (iv) Electrician (Skilled) - 02 (v) Plumber (Skilled) - 01 (vi) Helpers (Un-skilled, including - 05 Leave Reserve) Total - 15 Note : The contractor shall factor in anticipated increase in fare minimum wages by the Chief Labour Commisioner, Govt of India, Ministry of Labour (4.8.3), and quote accordingly. This office shall NOT amend the contract amount on account of wage, revision during the contract period including extension, if any. The contractor shall pay to the employees as per wages revised by the Chief Labour Commissioner, Govt of India, Ministry of Labour, from time to time.

B' Check of 320 KVA DG Set Make : Cummins including 'B' Check spares and Engine oil by OEM/Authorised dealer once in a year at Chandipur. Payment willbe made on prorata basis for 'B' check as per schedule.

B' Check of 100 KVA DG Set Make : Cummins including 'B' Check spares and Engine oil by OEM/Authorised dealer once in a year at Chandipur. Payment willbe made on prorata basis for 'B' check as per schedule.

Service Engineer visit for 11KV VCB Panel, Make-Schnider. Payment willbe made on prorata basis for visit as per schedule.

Service Engineer visit from Authorises Service Provider of Cummins for DG. Payment willbe made on prorata basis for visit as per schedule.

Bearing for Motors (6203) Make - TATA/eqvt

Bearing for Motors (6205) Make - TATA/eqvt

Bearing UCB-205-16 Make - TATA/eqvt

Fan Regulator Step, 2 Module, Anchor/Philips/Havells

Fan Blade for 1200 mm fans, white, (Set of 3), Havells/CG/Bajaj

Fan Clamp with Rubber for ceilin Fan

Capacitor for Fan, 2.5 MFD, Bajaj/Havells/CG

Capacitor for Exhaust fan, 4 MFD, Havells/CG/Bajaj

Capacitor for Exhaust fan, 6 to 10 MFD, Havells/CG/Bajaj

Outside cover for exhaust fan, 300 mm, Havells/CG/Bajaj

Exhaust Fan, 150mm, Plastic Body complete, Havells/CG/Bajaj

Exhaust Fan, 250mm, Plastic Body complete, Havells/CG/Bajaj

Ceiling Fan, 48", 1400MM, Make - CGL/Bajaj/Havells

Rewinding of Ceiling Fan/Exhaust Fan, Copper winding

Tube light Fluorescent Rod, T8, 36/40W, Code No-LHLFDLCENL7O036, Make-Havells

Tube Light 14W TL 5 (865), Make-Havells/Bajaj/Philips

LED Tube light Fluorescent Rotor Fit, T8, 18/20W, Make-Havells/Bajaj/Philips

LED Tube light Fluorescent, T5, 8W-10W, 1 feet long, Make-Havells/Bajaj/Philips

LED Tube light, T8, 20W, complete fitting, Code No-LHEXACP7IN1 W020, Model-E-Lite LED Pride Plus Neo, Make-Havells

Solor LED Street light, 35W, Make-Phillips/Sukam/Urja/Omega/Tata/Syska

Holder for Tube light, Pin Type, Bajaj/Anchor/Philips

Holder for Tube light, Push Type, Bajaj/Anchor/Philips

Starter for tube light, 18/36W, Code No-LHYF02000099, Make-Havells

Electronic Ballast for Tube Light, 40/36W, Code No-LHBF01904025, Make-Havells

Electronic Ballast for 2x18W Cross Pin PL Lamp, Make-Havells/Bajaj/Anchor/Philips

Electronic Ballast for 2x18W 4 Pin PL Lamp, Make-Havells/Bajaj/Anchor/Philips

Electronic Ballast for 4x14W TL 5 Tube Light, Make-Havells/Bajaj/Anchor/Philips

Lamp PL 2 Pin, 11 W, Bajaj/Anchor/Philips

Lamp PL Cross Pin, 18 W, Bajaj/Anchor/Philips

Lamp PL 4 Pin, 18 W, Bajaj/Anchor/Philips

LED Lamp, 9 W, Code No-LHLDEUHEML8R009, Make:Havells

LED Lamp, 20 W, Code No - LHLDEUEEML8R020, Make-Havells

Holder Bettan Brass, Philips/Bajaj/Anchor

Holder Bettan PVC, Anchor/Philips/Havells

Holders CFL lamp 4 Pin Type, Philips/CG/Anchor/Bajaj

Holder cross pin, Philips/CG/Anchor/Bajaj

Holder for PL Lamp, 11W, Philips/CG/Anchor/Bajaj

Switch Modular, 10A, ISI Marked, MK/Havells/Anchor

Switch Modular 2 Way, 10A, ISI Marked, MK/Havells/Anchor

Switch Modular, 16A, ISI Marked, MK/Havells/Anchor

Socket 5 pin, 6A, ISI Marked, Anchor/Philips/Havells

Socket 5 pin Modular, 6A, MK/Havells/Anchor

Socket 6 pin, 16A, Anchor/Philips/Havells

Socket 6 pin Modular, 20A, MK/Havells/Anchor

Switch & Socket combination, 6A , Anchor/Philips/Havells

Switch & Socket combination, 16A , Anchor/Philips/Havells

Plug Top, 2 Pin, 6A, Anchor/Philips/Havells

Plug Top, 3 Pin, 6A, ISI Marked, Anchor/Philips/Havells

Plug Top, 3Pin, 16A, ISI Marked, Anchor/Philips/Havells

Lamp MH, 70W, Havells/CG/Bajaj

LED Street Light, 45/50 W, Havells/CG/Bajaj

LED Street Light, 70 W, Havells/CG/Bajaj

LED Street Light, 100 W, Havells/CG/Bajaj

LED Driver for street light 45 to 70 W, Havells/CG/Bajaj

LED Flood Light, 50 W, Havells/CG/Bajaj

LED Flood Light,100 W, Havells/CG/Bajaj

LED flood Light, 150 W, Havells/CG/Bajaj

LED flood Light, 250 W, Havells/CG/Bajaj

LED Driver for Flood light 50 to 100 W, Havells/CG/Bajaj

Copper Ballast, 70W, Havells/CG/Bajaj

Capacitor, 20 MFD to 42 MFD, Havells/CG/Bajaj

Halogen lamp 500W (CGL / Philips)

Halogen lamp fitting 500W (CGL/ Philips)

PVC Box for STL DB, 300x200x100mm, Syntex/Havells/CG

Bolt connecter, 4 way, 32 Amp, Syntex/Havells/CG

GI Box (3-Way) for Modular Switches Make - Anchor/Havells/CG

PVC Box 150mm x 100mm, Anchor/Havells/CG

Screw for modular switch board, 2 in, SS, Pkt of 50 pc , MK/Anchor/Bajaj

Screw for modular switch board, 3 in, SS, Pkt of 50 pc , MK/Anchor/Bajaj

Casing capping PVC, 20mm, length of 3 mtr, Surya/Plasto/Vectus

Casing capping PVC, 25mm, length of 3 mtr, Surya/Plasto/Vectus

Casing Clip, Pkt of 100 pc, Surya/Plasto/Vectus

Wire Copper flexible, Single core, 1.0 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI

Wire Copper flexible, Single core, 2.5 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI

Wire Copper flexible, Single core, 4 Sqmm, Coil of 90 mtr, Havells/Finolex/KEI

Element Push Button (Red, Green) , Havells/CG/Anchor

MCB, SP, 10A, Havells/Finolex/KEI/L&T

MCB, SP, 16A, Havells/Finolex/KEI/L&T

MCB, SP, 32A, Havells/Finolex/KEI/L&T

MCB, DP, 32A, Havells/Finolex/KEI/L&T

MCB, DP, 40A , Havells/Finolex/KEI/L&T

MCB, DP, 63A, Havells/Finolex/KEI/L&T

MCB, 4P, 40A, Havells/Finolex/KEI/L&T

MCB Channels, Havells/Finolex/KEI/L&T

Relay MN-2.5 - 4 overload, Make-L&T/Havells

Cable Lugs Aluminium, 16 mm , Havells/Finolex/KEI

Cable Lugs Aluminium, 25 mm , Havells/Finolex/KEI

Cable Lugs Aluminium, 35 mm , Havells/Finolex/KEI

Amps Meter analog, 0 - 200 Amp/0 - 200 Amp/0 - 300 Amp, HPL/Techno/Flora

Volt Meter analog, 0-500 V, HPL/Techno/Flora

Industrial idicator LED, Red, Yellow, Blue, Havells/CG/Anchor

Contactor ML 1.5 Make - L&T/Legrand

Contactor 16 AMP 4 Pole, Make - Havells/Finolex/KEI

Contractor 2 NO/2 NC Make-L&T

Primer for Steel Surface, Make-Berger/Asian/Dulex

Synethic Enamel Paint (Red/Yellow/Blue/Black/Green) in 1 Ltr Container, Make-Berger/Asian/Dulex

PVC Cutting Box, 2way/3way/4way/6way

Bibcock Short body with Flange, 15mm, CP, Prayag/Hindware/Parryware

Bibcock long body with Flange, 15mm, CP, Prayag/Hindware/Parryware

Pillar cock, 15 mm, CP, Prayag/Hindware/Parryware

Angular Stop Cock with Flange, 15mm, CP, Prayag/Hindware/Parryware

Waste Coupling for Wash Basin, CP, Prayag/Hindware/Parryware

Waste Pipe for Wash Basin, 50x800mmPVC, Prayag/Hindware/Parryware

Shower Overhead with Arm, 6", CP, Prayag/Hindware/Parryware

Looking Mirror 2.5 x 4 Ft, Prayag/Hindware/Parryware

Floor Trap Jali, SS, (05 pc per pkt), Prayag/Hindware/Parryware

Cistern, PVC, Prayag/Hindware/Parryware

Connection pipe for Urinal / Cistern / Wash Basin, 24"/600 mm, PVC, Prayag/Hindware/Parryware

Connection Pipe for Geyser Hot and Cold, 24"/600mm PVC, Prayag/Hindware/Parryware

Waste Pipe, PVC, Prayag/Hindware/Parryware

Connecting Pipe PVC 15mm, Make-Prayag/Hindware/Parryware

Cistern Float Valve 15mm, PVC, Make-Prayag/Parryware

Cistern Handle PVC

Hand shower, Make-Jaquar/Prayag/Hindware/Parryware

Bottle Trap, Make-Jaquar/Prayag/Hindware/Parryware

UPVC Ball Valve, 50mm, Make-Jaquar/Prayag/Parryware

1'' Garden Pipe, ISI Marked, Hariplast/eqvt

Cover for water tank, PVC, Syntex/Plasto/Vectus

Tank Nipple, 25 mm, GI, ISI Marked, Unik/Amco/Oswal

Tank Nipple, 50 mm, GI, ISI Marked, Unik/Amco/Oswal

Ball Cock, 15 mm, Brass, ISI Marked, Unik/Amco/Oswal

Ball Cock, 20 mm, Brass, ISI Marked, Unik/Amco/Oswal

Ball Cock, 25 mm, Brass, ISI Marked, Unik/Amco/Oswal

Ball Valve, 15 mm, Brass, Unik/Amco/Oswal

Ball Valve, 20 mm, Brass, Unik/Amco/Oswal

Ball Valve, 25 mm, Brass, Unik/Amco/Oswal

Gate Valve, 15 mm, Brass, ISI R Brand, Zoloto/Unik/Amco

Gate Valve, 20 mm, Brass, ISI R Brand, Zoloto/Unik/Amco

Gate Valve, 25 mm, Brass, ISI R Brand, Zoloto/Unik/Amco

Gate Valve, 40 mm, Brass, ISI R Brand, Zoloto/Unik/Amco

Foot Valve, 150 mm, MS, Flach Type, ISI Mark, Zoloto/Unik/Amco

Gland for Pump, Model No-CE-80/26

Bearing set for Pump, Model No-CE-80/26

Bearing set for Pump, Model No-DB 50/32K

Gland for Pump, Model No-CPHM 50/32K

Reducer Socket, 20mm × 15mm, GI, Unik/Jindal/Sun

Reducer Socket, 25mm × 15mm, GI, Unik/Jindal/Sun

Reducer Socket, 25mm × 20mm, GI, Unik/Jindal/Sun

Elbow, 15mm, GI, Unik/Jindal/Sun

Elbow, 20mm, GI, Unik/Jindal/Sun

Elbow, 25 mm, GI, Unik/Jindal/Sun

Reducing Elbow, 25mm × 20mm, GI, Unik/Jindal/Sun

Socket, 15mm, GI, Unik/Jindal/Sun

Socket, 20mm, GI, Unik/Jindal/Sun

Socket, 25mm, GI, Unik/Jindal/Sun

Plug, 20mm, GI, Unik/Jindal/Sun

Nipple, 15mm × 50mm, GI, Unik/Jindal/Sun

Nipple, 20mm × 50mm, GI, Unik/Jindal/Sun

Nipple, 20mm × 100mm, GI, Unik/Jindal/Sun

Nipple, 25mm × 50mm, GI, Unik/Jindal/Sun

Nipple bit, 15mm, GI, Unik/Jindal/Sun

Pipe, 15 mm, GI, Medium Grade B, Tata/Jindal/Zenith

Pipe, 20 mm, GI, Medium Grade B, Tata/Jindal/Zenith

Pipe, 50 mm, GI, Medium Grade B, Tata/Jindal/Zenith

PVC Pipe, 25mm, Schedule 40, Prayag/Plasto/Vectus

UPVC Reducer Socket, 20mm x 15mm , Prayag/Plasto/Vectus

UPVC Reducer Socket, 25mm x 15mm , Prayag/Plasto/Vectus

UPVC Union, 25mm , Prayag/Plasto/Vectus

UPVC Socket, 20mm , Prayag/Plasto/Vectus

UPVC Elbow, 20mm , Prayag/Plasto/Vectus

UPVC Tee, 20mm , Prayag/Plasto/Vectus

UPVC Brass FTA, 20mm x 15mm, Prayag/Plasto/Vectus

UPVC Brass MTA, 20mm x 15mm, Prayag/Plasto/Vectus

Bleaching Powder

Non return Valve 80mm to 150mm, Audco, CI Body Flanged

Flage MS, 20mm, Make-Sun/Zoloto/Audco

Flage GI, 25mm to 50mm, Make-Sun/Zoloto/Audco

Control Assemble Part No 03006014, Make-Cummins

Engine Oil 20W-40W, Item No-504626, Make-Valvoline Premium Blue 7800 Plus

Buy Back Battery 12 Volt 32AH, Exide/Amco/Luminous/Cummins

Buy Back Battery 12 Volt 25 Plate 100 AH, Exide/Amco/Luminous

Buy Back Battery 24 Volt, 32 AH, Exide/Amco/Luminous/Cummins

Rotatory Hand Operated Barrel and Oil Drum Pump, Steel, Heavy Duty

100 Ltr capacity PVC Barrel for Oil Storage, Heavy and Unbreakable, High Grade PVC

Measurement Cane 10 Ltr

Measurement Cane 5 Ltr

Measurement Cane 2 Ltr

R-22 Freon Gas for AC Plant

Coupling Set MS RRL-110/140 for Condonser Pump & Motor

Coupling Set MS L-110 for Chilled water Pump & Motor

Coupling Rubber L-110

Fan Blade (Condonser Motor 12.5 HP) (Plastic)

Fan Blade (Chilled water Motor 10 HP) (Plastic)

Pressure (Gas) Guage Meter 0-500 Kg complete set for AC Plant

AHU Blet Type A-32 to A-52, Make-Eggo/Fenner/Dunlop

Welding Work

Lateh Work

5 HP to 7.5 HP Moto Rewinding

10 HP to 12.5 HP Moto Rewinding

Servicing of 5 to 7.5 HP Motor

Servicing of 10 to 12.5 HP Motor

Contactor MNX 18 Coil 240Volt, Make-L&T

MNX A1 Auxiliary Contacts 10 Amp 415V, Make-L&T

MNX A2 Auxiliary Contacts 10 Amp 415V, Make-L&T

VSP-3, Single Phase, Preventer, (System Supply), 415V AC, 50Hz, Make-L&T

Connectwell, CTS, 10U, 5mm to 10mm

Timmer for AC Plant

Shaft Sleeve for Pump

LWT & EWT Sensor, Make-Blue Star, ISI Marked Termister Probe A/W 3 mtr WIR

HT Insulator, 11 KVA, ISI Marked

Non Schedule Items (Refer Para 4.7) Three (03) quotations from OEM's / Authorised Firm are required for NS items and lowest quotation will considered for procurement. Vendors are required to enter Rs 1,50,000/- against this item which is the budget for Non Schedule items in this contract. No other figure above or below this lumpsum can be entered.

Note:- 1) The Firm should quote for Spares will be inclusive of all taxes andService Charges. No extra payment will be admisible.

TRIMURTI ENGINEERS INDIA

MCC MECHANICAL AND ENGINEERING CORPORATION

CLYMATE CONTROL

HYDRO PNEUMATIC ENGINEERS HYD PVT LTD