Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹15.0 L+₹45,663 (3.14%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹16.4 L+₹1.9 L (13.2%)Rejected-Finance R G BARUAH ROAD NEAR SHIV MANDIR GUWAHATI AIRPORT GUWAHATI 781015 | KAMRUP METRO | ASSAM | 781015 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
10 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyesh Srivastva
GE (AF) SURATGARH
COMPREHENSIVE MAINT WORKS IN ZONE B AKASH VIHAR IN DOMESTIC AREA AT AF STN SURATGARH
2022_MES_568845_1
8021/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹30,000
Yes
25 Jan 2023
13 Dec 2022
12 Jan 2023
13 Dec 2022
10 Jan 2023
27 Dec 2022
Amount
BOQ (COMPREHENSIVE MAINT WORKS IN ZONE 'B' AKASH VIHAR IN DOMESTIC AREA AT AF STN SURATGARH.)
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Glazed colour ceramic tiles in vertical surface 300mm x 450 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.
M & L for non-skid coloured tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement to match the shade laid over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for vitrified Ceramic tiles Light shade 10mm thick( square/rectangle) Polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.
M&L machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over 15 mm thick screed bed in CM 1:6complete all as specified and directed.
M&L PCC type B1 1:2:4 (using 20mm graded aggregate) 25 mm thick as in floor finished surfaces fair and even to receive tile, complete all as specified and as directed by Engr-in-Charge.
M&L for heavy duty vitrified coloured paving tiles of size 300 mm X 300 mm x 9-10 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles, laid over 15 mm thick screed bed in CM 1:6 complete all as directed and directed.
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4 Sqm each, complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each, complete all as specified and directed.
Taking down shutters of any description but exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm complete all as specified and directed.
S&F pressed steel frames of size 105x60 mm for doors with one or more rebated including necessary fixing lugs, hinges, strike plate etc, complete all as specified and directed.
S&F pressed steel frames of size 125x60 mm for doors with one or more rebated including necessary fixing lugs, hinges strike plate etc, complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work, complete all as specified and directed.
S&F Framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing, complete all as specified and directed.
S&F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and directed.
S&F 30mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge
S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.
S&F mild steel barrel tower bolt 300 mm, stove enamelled black with bright bolts, complete all as specified and directed.
S&F mild steel pressed handles 250mm, oval type, stove enamelled black, complete all as specified and directed.
S&F 100 mm size MS butt hinges medium weight cold rolled all as specified and directed.
M&L for two coats of synthetic enemel painting to wood and wood surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer, complete all as specified and directed.
S&F steel ventilator fixed type with glazing bars, complete all as specified and directed.
M&L for two coats of synthetic enemel painting to iron and steel surfaces of any description, not otherwise described over 10cm width or girth including preparation of new steel surfaces over a coat of red oxide primer, complete all as specified and directed.
Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring, complete all as specified and directed.
S&F, forsted glass 3 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.
S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections,or removal to store complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, removal to store complete all as specified and as directed.
Supplying and laying of CPVC pipes 20mm outer dia SDR 11 and plain CPVC SDR 11 including necessary fitting on walls/ceiling or laying in floors complete all as specified by Engr-in-charge.
S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.
Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.
M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in CM 1 : 3 width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm grade aggregate) 75 mm thick as in plinth protection / paving finished fair and even without using extra cement, complete all as specified and as directed.
Dismantling existing water tank of capacity exc 250 and n exc 500 ltrs capacity and removing to store
S&F rotational moulded polyethylene water storage tank ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs, complete all as specified and directed.
Dismantling existing water storage tanks exc 500 litres but n.exc 1000 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge
S&F, Rotational moulded PVC, triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.
S&F, Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge.
S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate, complete all as specified and as directed.
M&L 5.5 mm thick tinted glass including necessary clips, rubber packing & aluminium beading (aluminium frame ), complete all as specified and as directed.
Supply fabricating and fixing of aluminium door powder coated of extruded aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces, complete all as specified and as directed by Engineer-in-Charge at site. (Cost of sheet glass Plain/frosted shall be measured and paid sepearately )
S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, complete all as specified and as directed.
M&L 18 mm thick Medium density fibre board, exterior grade, fixed to timber framework as in cupboard shutters including leeping/beading fancy type with screws, complete all as specified and as directed.
S&F soft closing clip on hinge, full / half overlay type, of stainless steel, complete all as specified and as directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type anodiseed, complete all as specified and as directed.
S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified and as directed.
S&F toughened glass frameless partition (area of single partition upto 10 sqm )with fixed portion of 12 mm thick glass including cutting holes edges rounded and etching works etc and all kind of SS patch fitting & fixture spinder patch etc complete all as specified and directed .Make : Modiguard . Saint Gobin , Triveni float glass.
Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
M/s JUGAL KISHORE MISHRA AND SONS
M/S VISHNU ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .