Works Contract for Transportation of poles, replacement of poles Erection of 33KV lines, dismantling of exst 33KV lines and other allied works towards augmentation 33KV Poottuthakku feeder from 110/33-11KV Karnambut ss under RDSS at Rathinagiri

Amount

Excavation and Erection of RCC, REC, PSC poles above 8.00m length by using JCB/Manual with base plate.

Excavation and Erection of stay set complete with fixing up stay wire Eye, Bow,Guy Shackle, Binding, Stay Plate etc.

Fixing of HT Tapping X arm / V Cross arms 3 1/2, 4 1/2 & 5 feet

Fixing of HT / LT TI Fitting

Fixing of HT Pin Insulators (11/33KV)

Fixing of HT 33 KV stain disc

Fixing of Two Tapping cross arm per cut point upto 33KV line including fixing of Discs, insulators and Jumpering etc

Clamp alteration

Paving and stringing of conductors of sizes 6/4.72 & 7/1.57 mm Dog Conductor. (route length)

Transportation of all types and sizes of poles and other associated material from road side to pole pit and vice versa upto 0.50KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) for a lead upto 5KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) Above 5KM of lead of every KM

Transporting of Distribution Transformer / Line materials from Sub stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Transporting of Distribution Transformer / Line materials from stores to office/ site above 10KM distance by engaging 1 ton capacity Minidor(lorry)

Loading/Unloading of variouse size of REC, RCC,PSC Poles above 8.0m length

Loading of conductor

Unloading of conductor

Loading/Unloading of line material

Dismandling of RCC, REC, PSC & Metal poles of all sizes including the closing of pit

Dismandling of conductor of upto 7/3.35/AB Cable including Transporting the conductor to the nearest road side and stocking in coils

Dismandling of Cross arm clamps, TI fittings hardwares, insulators etc.

Earthing of poles with GI wires 4/ 6/8 SWG by coil earthing

Cement Concrete of ratio for individual poles shall be in the ratio of 1:2:4 (1 part Cement, 2 parts coarse sand and 4 parts 20mm aggregate stones chips)(material +labour) sleeve concreting of poles

Cement Concrete of ratio for stay set foundation shall be in the ratio of 1:3:6 (Cement concrete in mixture 1 part cement, 3 part coarse sand, 6 part 40mm size aggregate stone chips).

Numbering of each Poles with black letters in Yellow base by using stencils/skilled painters (including cost of paint per pole).The height of the lettering shall be 40mm for numbers and 50mm for alphabets.

Painting of all types of X arm and TI fitting with Aluminium Paint (including cost of paint)

Tree cutting

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder