GE/PNH-50/2020-21

Amount

Almirah Large Steel FD-351,339, 1031

Removing unsv shelves of almirah large steel, S&F of new shelves made out of 1 mm thick MS sheet with suitable clips/brackets/gas welding (any one) as per all specified and directed by Engr-in-charge.

Removing unsv foot rest of almirah large steel, S&F of new foot rest made out of 1.6mm thick MS sheet with continuous gas welding all as specified and directed by Engr-in -charge.

Removing unsv loock of almirah large steel, S&F of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by Engr-in-charge. Make Godrej/Harrison

Removing of unserviceable handle of almirah large steel, S&F of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by Engineer-in-charge.

Removing of unserviceable locking device of almirah large steel, S&F of new three way locking device (Chakra/locking rod and locking cover) made out of MS bar round 10mm dia all as specified and directed by Engineer-in-charge.

Removing of unserviceable key plate of almirah large steel, S&F of new key plate all as specified and shown on drg.

Welding per 5 cm wherever necessary, all as specified and directed by Engineer-in-charge.

M & L for two coat of synthetic enamal paint (1st grade quality shade/colour shall be approved by Engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by Engineer in-charge.

Almirah Med Steel (FD-243, 340, 1032)

Removing unsv shelves of almirah med steel, S&F of new shelves made out of 1 mm thick MS sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by Engr-in-charge.

Removing unsv foot rest of almirah med steel, S&F of new foot rest made out 1.6mm thick MS sheet with continuos gas welding all as spcified in and directed by Engr-in-charge.

Removing unsv lock of almirah med steel, S&F of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by Engr-in-charge. Make - Godrej/Harrison

Removing of unserviceable handle of almirah med steel, S&F of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by Engineer-in-charge.

Removing of unserviceable locking device of almirah large steel, S&F of new three way locking device (Chakra/locking rod and locking cover) made out of MS bar round 10mm dia all as specified and directed by Engineer-in- Charge.

Removing of unservicable key plate of almirah med steel, S&F of new key plate all as specified and shown on drg.

Welding per 5 cm wherever necessary, all as specified and directed by Engineer-in-charge.

M & L for two coat of synthetic enemal paint (1st grade quality shade/colour shall be approved by Engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by Engineer in-charge.

Locker Bed Side Steel (FD-1029)

Removing of old unsv hasp and staples of locker bed side steel, S&F of new MS hasp and staples as spceified in Drg and approved by the Engr- in- Charge.

Removing of old unsv conduit pipe of locker bed side steel, S&F of new CP steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by Engineer-in- Charge.

Removing of old unsv handle of locker bed side steel, S&F of new CP steel handle 150 mm long as approved by Engineer-in- Charge.

Removing of old unsv hinges of locker bed side steel, S&F of new MS hinges 75mm long as approved by Engineer-in- Charge.

Removing of old unsv foot rest of locker bed side steel, S&F new foot rest made out 1.6 mm thick MS sheet with continuous gas welding all as specified and directed by Engr-in-charge.

Welding per 5 cm as required and specified.

M & L for two coat of synthetic enemal paint (1st grade quality shade/colour shall be approved by Engineer-in-charge) including denting and painting of Locker bed side steel throughout inside and outside complete with spray machine after proper smoothing the surface all as directed by Engineer in-charge.

Form without back (FD-77)

Removing of unserviceable planks of seat form without back, S&F of new planks made of 2nd class hard wood of size 1525x255x25mm duly plained and polished complete all as specified and directed by Engineer-in-charge.

Removing of unserviceable MS square conduit pipe of from without back, supply and fix of new MS square conduit pipe of size 25mm thick where reqd complete all as specified and directed by Engineer-in-charge.

Welding per 5 cm of form without back where as required complete all as specified and directed.

Materials and labour of one coat of synthetic enamel black colour on all steel protion of form. Complete all as specified and directed by Engineer-in-charge.

Chair CB Steel with Arms (FD-75M)

Removing of unsv seat frame of chair CB Steel with arms including old screws, S&F new seat frame of well seasoned 1st class sheesham wood duly caned with 2 mm wide plastic cane half round in Godrej pattern fixed to frame with four numbers 75mm machine screws, all as specified and shown on drg.

Removing of unsv back frame of chair CB Steel with arms including old screws, S&F new back frame of well seasoned 1st class sheesham wood duly caned with 2 mm wide plastic cane half round in Godrej pattern fixed to frame with four numbers 75mm machine screws, all as specified and shown on drg.

Removing of unserviceable arms rest of chair CB Steel with arms, S&F of well seasoned 1st class sheesham wood duly painted one coat of synthetic enamelled black paint/ teak shade polished complete all as specified and shown on drg.

Removing of unserviceable rubber cap of chair CB steel with arms, supply and fix of new rubber cap of best quality, complete all as specified and directed by Engineer-in-charge.

Removing of unserviceable rubber shoes of chair CB steel with arms, supply and fix new hard rubber shoes of best quality complete all as specified directed.

Spot welding to broken joints/parts wherever necessary as specified and directedby Engineer-in-charge.

Painting of steel frames of chair CB steel with arms with two coat of synthic enamel OG paint of approved quality after preparation of surfaces all as specified and directed by Engineer-in-charge.

Removing of unserviceable flat rion strip from the bottom of seat and back of chair, supply and fix new flat iron strip of size 50mm x 20mm x 3mm two at bottom and two at back to provide support with welding the both ends of strip with conduit of chair, complete all as specified and directed by Engineer-in-charge.

Table office clerk steel (FD-84,381)

S&F of new locks 4 levers with duplicate keys, the locks shall be of approved quality incl removal of old unserviceable locks Make - Godrej, Harrison, Prakash, Chowdhary, Supreme, Rima complete all as specified and directed by Engineer-in-charge.

Supply and fixing of top with BWR 18/19 mm prelaminated particle board exterior grade natural teak shade on one side and ivory on another side with teak wood edging all round including removal of old UNSV Existing Top Make of particle board shall be NOVAPAN/BHUTAN/KITPLY confirming to IS-3097 & IS-12823.

S&F new best quality rubber shoes to four legs of each table, including removal of old broken shoes complete all as specified and directed by Engineer-in-charge.

Welding per 5cm to broken legs/stiffner complete all as specified and directed

Denting and painting of table clerk throughout inside and outside with one coat of synthetic enamel paint 1st grade quality (shade/colour) shall be approved by Engr-in-Charge after proper smoothening surfacing denting and repairing be carried out to drawer for fixing and smooth functioning of drawers complete all as specified and directed by Engineer-in-charge.

Table Office Officer Steel (FD-84,1003)

Welding per 5cm to broken legs/stiffner complete all as specified and directed.

S&F of new locks 4 levers with duplicate keys. The locks shall be of approved quality incl removal of old unserviceable locks. Make :- Godrej/Harrison/Rima/Prakash complete all as specified and directed

Supply and fixing of top with BWR 18/19 mm prelaminated particle board exterior grade natural teak shade on one side and ivory on another side with teak wood edging all round inclding removal of old UNSV Existing Top Make of particle board shall be NOVAPAN/ BHUTAN/KITPLY confirming to IS-3097 & IS-12823

S&F new best quality rubber shoes to four legs of each table, including removal of old broken shoes complete all as specified and directed.

Denting and painting of table Officers throughout inside and outside with one coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by Engr-in-Charge) after proper smoothening surfacing denting and repairing be carried out to drawer for fixing and smooth functioning of drawers complete all as specified and directed by Engineer-in-charge.

Rack Steel Adjustable 3 Tier (FD-106(M)

Removing of broken corroded shelf of rack after dismantling it from four angles of rack, S&F new shelf made out of 1mm thick MS sheet as per size mentioned in drg.

Welding per 5cm as required whenevernecessary all as specified.

Materials and labour of one coat of synthetic enamel OG colour Paint including denting and painting of surface of rack steel, complete all as specified and directed by Engineer-in-charge.

Rack steel Adjustable 6 tier (FD-106(M)

Removing of broken corroded shelf of rack after dismantling it from four angles of rack, S&F new shelf made out of 1mm thick MS sheet as per size mentioned in drg.

Welding per 5cm as required whenever necessary all as specified.

Materials and labour of two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by Engr-in-Charge) including denting and painting of surface of rack steel, complete all as specified and directed by Engineer-in-charge.

Table dining ORs (FD-165(M)

Welding per 5cm to MS pipe of the frame as reqd complete all as specified and directed by Engineer-in-charge.

Painting to frames of table throughout with one coat of synthetic enamel black paint or as approved by Engineer-in-charge.

S&F of new top made out of 18/19mm thick pre-laminated particle board with 4mm teak wood beading alround its edges including removal of old UNSV top Make :- NOVAPAN/ BHUTAN/ KITPLY complete all as specified and as directed by Engineer-in-charge.

Removal of unserviceable legs of table dining ORs, supply and fix of new legs of 25mm square tube of MS 1.6 mm thick and 760mm long by continuous welding to table dining ORs all as per drawing complete all as specified and directed by Engineer-in-charge.

Removing the unserviceable centre stiffener of size 1360mm x 25mm x 25mm from table dining OR's without damaging the adjacent sides. S&F new centre stiffener of same size, complete all as specified and directed on drg.

Removing the unserviceable side stiffener of size 470mm x 25mm x 25mm from table dining OR's without damaging the adjacent sides. S&F new stiffener of same size, complete all as specified and directed on drg.

CHAIR DINING FD-262,1105

Dismantling of old unsv /worn out front legs from the chair without damaging the adjacent parts , Materials and labour for fixing the new front legs made out of first class sheesham wood, made to shape, fixed with bamboo pins and fevicol making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out rear legs from the chair without damaging the adjacent parts, Materials and labour for fixing the new rear legs made out of first class sheesham wood, made to shape fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out rails from the chair without damaging the adjacent parts, Materials and labour for fixing the new sides/back/front rails, made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out back stiffener from the chair without damaging the adjacent parts, Materials and labour for fixing the new stiffener of back, made out of 1st class sheesham wood made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out stiffeners legs (short/long), from the chair without damaging the adjacent parts, Materials and labour for fixing the new stiffeners legs (short/long), made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Polishing to chairs with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

CHAIR EASY (FD-229 &1108)

Dismantling of old unsv /worn out front legs from the chair without damaging the adjacent parts, Materials and labour for fixing the new front legs made out of first class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out rear legs from the chair without damaging the adjacent part, Materials and labour for fixing the new rear legs made out of first class sheesham wood, made to shape fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out sides/back/front seat railss from the chair without damaging the adjacent parts, Materials and labour for fixing the new sides/back/front seat rails, made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out back stiffener from the chair without damaging the adjacent partsMaterials and labour for fixing the new short stiffener of back, made out of 1st class sheesham wood made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out arms from the chair without damaging the adjacent parts, Materials and labour for fixing the new arms made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Polishing to chairs with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

CHAIR WRITING (FD-261 )

Dismantling of old unsv /worn out front legs from the chair without damaging the adjacent partsMaterials and labour for fixing the new front legs made out of first class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out rear legs from the chair without damaging the adjacent parts , Materials and labour for fixing the new rear legs made out of first class sheesham wood, made to shape fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out sides/back/front seat railss from the chair without damaging the adjacent parts, Materials and labour for fixing the new sides/back/front seat rails, made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out back stiffener from the chair without damaging the adjacent parts. Materials and labour for fixing the new short stiffener of back, made out of 1st class sheesham wood made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out arms from the chair without damaging the adjacent parts, Materials and labour for fixing the new arms made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out bottom stiffeners from the chair without damaging the adjacent parts, Materials and labour for fixing the new bottoms stiffeners, made out of 1st class sheesham wood, made to shape, fixed wih bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Polishing to chairs with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna/burnt seina (as per requirement) and make the surface again smooth with sand/emery paper to the entire satisfaction of Engineer-in-Charge.

CHAIR WB (FD-285)

Dismantling of old unsv /worn out front legs from the chair without damaging the adjacent partsMaterials and labour for fixing the front legs made out of first class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/ groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out rear legs from the chair without damaging the adjacent parts , Materials and labour for fixing the new rear legs made out of first class sheesham wood, made to shape fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides

Dismantling of old unsv /worn out sides/back/front seat railss from the chair without damaging the adjacent parts, Materials and labour for fixing the new sides/back/front seat rails, made out of 1st class sheesham wood, made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Dismantling of old unsv /worn out back stiffener from the chair without damaging the adjacent partsMaterials and labour for fixing the new short stiffener of back, made out of 1st class sheesham wood made to shape, fixed with bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Removing old seat from chair ,S&F new seat make out of 6mm thick Plywood as specified and as shown in drg.

Dismantling of old unsv /worn out bottom stiffeners from the chair without damaging the adjacent parts, Materials and labour for fixing the new bottoms stiffeners, made out of 1st class sheesham wood, made to shape, fixed wih bamboo pins and fevicol by making tenon/groove joints as specified and as shown in drg duly wrought on all sides.

Polishing to chairs with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna/burnt seina (as per requirement) and make the surface again smooth with sand/emery paper to the entire satisfaction of Engineer-in-Charge.

SOFA SET 4/5 SEATER

Removing of UNSV cushion foam of sofa set and supply and fixing new cushion to sofa set 32 density, cool foam of size 560x530x100mm duly covered with best quality velvet cloth not less than Rs 180 per metre as approved duly stretched all as specified and directed :Make Kurlon or equivalent as approved by GE.

Removing unserviceable broken legs of sofa set carefully without damaging the adjacent parts and fixing new leg of teak wood of size 70 mm x 35 mm in section made to shape as shown on drawings complete all as specified and directed.

Removing unserviceable broken arms of sofa set carefully without damaging the adjacent parts and supply and fixing new arm of teak wood of size 35mm x 70 mm in section made to shape as shown on drawings complete all as specified and directed.

Removing unserviceable broken wooden battens of seat of sofa set carefully without damaging the adjacent parts and S&F new batten of teak wood of size 50 mm x20 mm in section made to shape as shown on drawings complete all as specified and directed.

Removing unserviceable broken wooden bearer from the bottom of wooden tension seat of sofa set carefully without damaging the adjacent parts and supply and fixing the bearer of teak wood of size 40 mmx 40mm in section made to shape as shown on drawing complete all as specified and directed.

Polishing to Sofa Set 4/5 seater with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

TABLE 900X600MM WITH DRAWER FD-283 & 223

Removing of old/broken top from existing table with drawer and in Lieu of providing new top table of 18 mm thick prelaminated particle board 4mm thick as directed by Enginner-in-charge and shown on drawing.

Removing of Old/broken leg from existing table 3'x2' with drawer and in Lieu of providing new leg to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken short rail from existing table 3'x2' with drawer and in Lieu of providing new sides rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken long rail from existing table 3'x2' with drawer and in Lieu of providing new front/rear rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken side stiffener from existing table 3'x2' with drawer and in Lieu of providing new side stiffener to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken centre stiffener from existing table with drawer and in Lieu of providing new centre stiffener to table as directed by Engineer-in-charge.

Polishing to chair with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

TABLE 900X600MM WITHOUT DRAWER FD-284 & 224

Removing of old/broken top from existing table with out drawer and in Lieu of providing new top table of 18 mm thick prelaminated particle board as directed by Enginner-in-charge and shown on drawing.

Removing of Old/broken leg from existing table 3'x2' with out drawer and in Lieu of providing new leg to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken short rail from existing table 3'x2' with out drawer and in Lieu of providing new sides rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken long rail from existing table 3'x2' with out drawer and in Lieu of providing new front/rear rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken side stiffener from existing table 3'x2' with out drawer and in Lieu of providing new side stiffener to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken centre stiffener from existing table with out drawer and in Lieu of providing new centre stiffener to table as directed by Engineer-in-charge.

Polishing to Table 900x600mm with out drawer with french polish after cleaning / smoothening the surfaces (old or new) with sand/ emery paper, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

TABLE DINING 6 PERSONS (FD-239 & 273) Removing of old broken parts of table carefully without damaging adjacent parts, supply and fixing of new parts made of well seasoned sheesham/teak wood, made to shape as per drawing, joints to be strengthened by using adhesive and bamboo pins complete and shown on drawing for the following parts of items :-

Supply and fixing top to the table made out of 18/19 mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4mm thick edging of teak wood, complete all as specified.

Removing of old/ broken legs from existing table dining 6person, providing new legs made out of first class Teak/sheesham wood as directed by Enginner-in-charge and shown on drawing.

Removing of old/broken long rail from existing table dining 6 person, providing new front /rear rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken short rail from existing table dining 6 person, providing new side rail to table as directed by Engineer-in-charge and shown on drawing.

L-Shape corner of flat iron as per drawing between legs and rail fixed with screws complete.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the table shall be polished with french polish after properly cleaned and smoothened the surface complete, all as specified and directed.

Table writing FD-33, 84,381 :- Removing old broken parts of table carefully without damaging adjacent parts. Supply and fixing of new parts made of well seasoned sheesham/teak wood, made to shape as per drawing, joints to be strengthened by using sdhesive and bambbo pins complete all as spoecified and directed bye the Engineer-in-Charge and shown on drawing for the following parts of items:-

Removing the broken shutter of the box without damaging the adjacent part and supply and fixing the new shuttter made out of Pre-laminated particle board 18mm thick veneered to be fixed with piano hinges as per drawing.

Supply and fixing the top to the table made out of 18/19 mm thick prelaminated particle board exterior grade. Natural teak color, edges duly covered with thick edging of teak wood.

Removing of Old/broken leg from existing table writing and in Lieu of providing new leg to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken long rail from existing table writing and in Lieu of providing new long rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken short rail from existing table writing and in Lieu of providing new short rail to table as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken long stiffener from existing table writing and in Lieu of providing new side stiffener to table as directed by Engineer-in-charge and shown on drawing.

Polishing to Table with French polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

TEAPOY :-

Removing of old/broken top from existing teapoy and in lieu of providing new top to teapoy of 18 mm thick prelaminated particle board as directed by Engineer-in-charge and shown on drawing.

Removing of Old/broken leg from existing teapoy and in lieu of providing new leg to teapoy as directed by Engineer-in-charge and shown on drawing.

Removing of old/Broken long rail from existing teapoy and in lieu of providing new side rail to teapoy as directed by Engineer-in-charge.

Removing of old/broken short rail from existing teapoy and in Lieu of providing new front/rear rail to teapoy as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken side stiffener from existing teapoy and in lieu of providing new side stiffener to teapoy as directed by Engineer-in-Charge and shown on drawing.

Polishing to Teapoy with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paperto the entire satisfaction of Engineer-in-Charge.

PEG TABLE :-

Removing old broken top from existing table peg and in lieu of providing new top to table peg of 18 mm thick prelaminated particle board as directed by Engineer-in-charge and shown on drawing.

Removing of old/broken leg from existing table peg and in lieu of providing new leg to table peg as directed by Engineer-in-Charge and shown on drawing.

Removing of old/ broken side rail form existing table peg and in lieu of providing new side rail to table peg as directed by Engineer-in-Charge and shown on drawing.

Removing of old/brokn front/rear rail from existing table peg and in lieu of providing newfront/rear rail to table peg as directed by Engineer-in-charge and as shown on drawing.

Polishing to Peg Table with french polish after cleaning/smoothening the surfaces (old or new) with sand/ emery pape, refilling the borer holes/cracks with putty (wherever required) applying the raw sienna (as per requirement) and make the surface again smooth with sand/emery paper to the entire satisfaction of Engineer-in-Charge.

Table Dressing Gents FD-230 : Removing old broken parts of table carefully without damaging adjacent parts, supply and fixing of new parts made out of well seasoned sheesham/teak wood made to shape as per drawing joints to be strengthened by using adhesive and bamboo pins complete all as specified and directed by the Engineer-in-Charge and shown on drawing for the following parts of items.

Supply and fixing of plywood commercial 12 mm thick to the back side of table.

Supply and fixing of prelaminated particle board 18 mm thick to the side of the table.

Supply and fixing MDF board 18 mm thick veneered at the bottom of the table.

Supply and fixing plywood commercial 6mm thick to the bottom of the drawer.

Supply and fixing of prelaminated particle board 18 mm thick to the top of the table.

Supply and fixing looking glass 5mm thick of the table as per drawing with plywood commercial 6mm thick on the back.

CHAIR MOULDED PLASTIC WITH CUSHION:-

Remove old unsv seats of Chair and Supply and Fix new seats of 2" foam cushion and covered with best quality tapastory cloth as specified and directed by Engineer-in-charge.

Remove old unsv back of chair and Supply and Fix new one as specified and directed by Engineer-in-charge.

RECANNING OF WOODEN /STEEL FURNITURE :- Material and labour for re-canning of all types of wooden /steel chairs with 2 mm wide half round white plastic cane and border with 3 mm wide half round white plastic cane as per godrej Pattern all as shown and specified in drg and all as directed. Make of Cane :- Shah/Premier

CHARPOY GI PIPE,FD-220:-

Removing of old unserviceable nylon newar of GI Charpoy and supply and retaping of charpoy with 45/50 mm wide Superior grade light colour nylon newar Make :- USHA completed all as specified and directed by the Engineer- in-charge.

Taking out old broken unserviceable long rail and S&F with new long rails of GI pipe 32mm bore Med grade duly threaded both end to the required size fitted to the frame complete all as specified as shown on drg and all as directed. Make of Pipe:- RAMA, Parkash, Surya

Replacing with 2 Nos short rail of GI Pipe Made out of old long rail retrieved vide ser No 28.02 here-in-before duly threaded both end to require size fitted to the frame complete all as shown on drg and directed by Engineer-in-charge.

Taking out old broken unserviceable short rails and replacing with 2 Nos Legs made out of old short rail retrieved vide ser No 28.03 here-in-before duly threaded to required size ; fitted to the frame complete all as shown on drg and all as directed by Engineer-in-charge.

Taking out old unserviceable three way elbow from GI pipe by unscrewing and replacing with new three way elbow GI 32mm bore/dia ISI marked complete all as specified as shown on drg and as directed.

Taking out old unserviceable GI check nut from the frame by unscrewing and replacing with new check nut GI 32mm bore/dia as per sample kept in BSOs office and as directed.

CHARPOY DOUBLE BUNK

Taking out unserviceable Ply 12 mm thick from the frame of Charpoy ,S&F 12mm thick BWR Plywood of approved make and brand. Complete all as specified and directed by Engineer-in-Charge.

Taking out existing unserviceable nut and bolts from charpoy double bunk as per existing size 50 mm long , S&F new nut and bolt complete all as specified and directed by Engr-in-charge

Materials and labour of one coat of synthetic enamel silver colour paint to steel portion of double bunk charpoy, rest all as specified and directed by Engineer-in-charge.

M/S Ramgarhia Brothers

M/S BAKSHI VIDYA BHUSHAN AND BROS