OHE Modification for elimination of LC gates no.19,37,89,90,315,319,356,436 by construction of RUBs in Hubballi Division.

01-PART A - Under Non Power Block

Supply of traction mast/other special masts (BFB/RSJ/B-series/S-series etc & Dwarf Mast as required)with 1000 gm/sq.m galvanisation

Supply of Small parts steel work other than the mast/TTC/Portal with1000 gm/sq.m galvanisation.

Supply(excluding supply of copper catenary wire) of anti creep with Cadmium Copper/pure copper Catenary Wire.

Supply of Guy Rod assembly

Supply of 3:1, 3 Pulley type Regulating Equipment with counterweight assembly of conventional OHE

Supply of materials for termination of single overhead equipment conductor (Excluding 9 Tonne insulator)

Supply of single bracket assembly

Supply of a Section Insulator assembly

Supply of copper jumper

Supply of Galvanized steel flexible wire bond for traction with lug asper RDSO's Drg (For Lug)TI/DRG/GTHLUG/RDSO/00001/04/0duly crimped on both ends of each bonds and RDSO SPCN No.TI/SPC/OHE/GALSTB/0040 with A&C slip no. 1/(8/2005) for various length of each bond complete withlugs- 3.0 Mtr.

Erection of Galvanized steel flexible wire bond complete with lugs.

Supply of MS flat (40x6mm).

Erection of MS flat.

Concrete for foundations and plinths --other than hard soil (M-15).

Supply of a 25 kV Single Pole Isolator without earth contact assembly.

Supply of TIRFOR - 3 TONNE CAPACITY- PULLING A N D LIFTING MACHINE - AS P E R R D S O SPEC.NO.TI/OHE/TOOL/PL/0990

Supply of Tirfor 5 tonne

Supply of Unbranded Hawser-laid Manila Ropes (diameter 8 mm to 128 mm )

Supply of Earth tester 04 terminal hand driven generator type range 0-10/100 ohm with testing leads, spikes, hammer complete kit.

Supply of Digital Earth Resistance Meggar with Three ranges 0 to 20 ohms, 0 to 200 20 ohms and 0 to 2000 ohms having LCD display of Size 70.6mm x 34 mm, measuring 0 to 200 ohms AC Earth Voltage, display count 2000 including supply of 1.5 V Alkaline Batteries, test leads of 5 mtrs, 10 mtrs, 20 mtrs, 30 mtrs, 3 Spikes of 10 mm dia, 450 mm long, hammer with carry bag.

Supply of Hand-held Digital Multimeter, Technical Specification: Volt- DC: 0-1000 Volt. Volt-AC: 0 -1000 Volt RMS, DC Current=10 to 20 Amps. AC RMS Current = 10 to 20 Amps, Resistance Up-to 50M OHM or more.

Supply & erection of retro reflective type neutral section switch OFF power Boards as per RDSO specification No. ETI/OHE/33A (12/97) Rev.8 (11/2012) or latest & drawing No. RE/33/348, Rev-B or latest as per scope for work and explanatory note.

Supply & erection of retro reflective type neutral section switch ON power Boards as per RDSO specification No. ETI/OHE/33A (12/97) Rev.8 (11/2012) or latest & drawing No. RE/33/349, Rev-B or latest as per scope of work and explanatory note.

Supply & erection of retro reflective type neutral section 500 mtr. Boards as per RDSO specification No. ETI/OHE/33A (12/97) Rev.8 (11/2012) or latest & drawing No. RE/33/349, Rev-B or latest as per scope of work and explanatory note.

Supply & erection of retro reflective type neutral section 250 mtr. Boards as per RDSO specification No. ETI/OHE/33A2/97) Rev.8 (11/2012) or latest & drawing No. RE/33/355, Rev-B or latest as per scope of work and explanatory note.

02-PART B - Under Power Block

Erection of Galvanised rolled/fabricated traction mast, main mast of switching post and LT supply transformer station.

Erection of galvanised small parts steel work other than mast.

Erection of single pole isolator without earth contact assembly.

Erection of Guy Rod assembly

Erection 3:1, 3 Pulley type Regulating Equipment with counterweight assembly of conventional OHE

Erection of Section insulator assembly

Erection of a single bracket assembly

Erection of materials for termination of single overhead equipment conductor

Erection of copper jumper.

Dismantling of anti-creep.

Dismantling of single pole isolator.

Dismantling of SPS.

Dismantling of Section Insulators.

Dismantling of Cantilever assembly/ OHE support.

Dismantling of portal/TTC boom including cutting of upright.

Cutting of old Mast / Head Span Mast.

Slewing & put back of OHE for crane work.

Adjustment of OHE and Tower wagon checking.

Transfer of equipments from one mast or support to another

Undertaking work under power block on item No.B.1

Undertaking work under power block on item No.B.2

Undertaking work under power block on item No.B.3

Undertaking work under power block on item No.B.4

Undertaking work under power block on item No.B.5

Undertaking work under power block on item No.B.6

Undertaking work under power block on item No.B.7

Undertaking work under power block on item No.B.8

Undertaking work under power block on item No.B.9

Undertaking work under power block on item No.B.10

Undertaking work under power block on item No.B.11

Undertaking work under power block on item No.B.12

Undertaking work under power block on item No.B.13

Undertaking work under power block on item No.B.14

Undertaking work under power block on item No.B.15

Undertaking work under power block on item No.B.16

Undertaking work under power block on item No.B.17

Undertaking work under power block on item No.B.18

Undertaking work under power block on item No.B.19