REPAIR TO WALLS, CEILING ETC INCLUDING SURFACE FINISHES, PAINTING ETC IN OTM ACCN OF 508 ABW AT CHHEOKI PRAYAGRAJ

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for preparing new plaster surfaces of ceiling and applying two coats of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surface and applying two coat of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for preparing new plaster surfaces of wall and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 sqm over minimum 2 mm thick wall care putty in two coat, Each coat should have 1 mm thick complete all as specified and directed.

M&L for preparing new plaster surfaces of Walls and applying two coats of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removing existing treatment on wall and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 sqm over minimum 2 mm thick wall care putty in two coat, Each coat should have 1 mm thick complete all as specified and directed.

M&L for complete removal of existing treatment on Walls and applying two coat of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&l for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment on Walls surface of wall and applying two coats of cement base paint over a coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed.

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L for preparation of old painted steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red Oxide, zink crome primer complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair for fully glazed 12 mm thick Toughned glass as in , fixed partitions, automatic doors and similar work including cutting to shape, drilling holes including all necessary fittings & fixture like hinges, joint cleat etc complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F in repair for Main entrance/ other doors in double shutter “fully glazed” of 10.mm thick toughened glass to be fixed with patch fittings including locks, with SS 304 TGDIH 600 X 32 SSS length 600mm brush finished “D” Type door handle 04 Nos, Floor springs 02 Nos The cost shall including cutting to shape, drilling holes including all necessary fittings & fixture like hinges, handle Floor springs etc complete all as specified and directed.

M&L for complete removal of existing treatment on wall for applying two coat of plastic emulsion paint over and including priming coat of interior primer applied @0.90 litre/10 sqm over minimum 2 mm thick wall care putty in two coat, Each coat should have 1 mm thick complete all as specified and directed.Note- Plastic emulsion paint and primer of same manufacturer to be applyed through mechenical mean only.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 18-20mm thick granite work table rubbed and polished for wall lining /kitchen platform over 12mm thick cement mortar 1:3 thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of PCC in ground floor & pavings n.exc 15 cm thickness below or above GL, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick including over 20 mm cement (1:6) screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including backing coat 10 mm thick in cement mortar 1:3 including rubbing and polishing complete all as specified and directed.

M&L for mirror polishing on old/ new marble / granite / Kota stone / stone work wherever is required to give high gloss finish complete all as specified and directed

M&L for 60mm thick rubber moulded glosy finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth noy less then 350 kg/sqcm as approved complete all as specified . complete all as specified and directed.

M&L for 25 mm Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar (1:6) including jointing with neat cement slurry mixing pigment to match the colour etc complete all as specified and directed.

M&L for non-skid Heavy duty endura tile 300x300x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) Cement concrete in sub floor, sub base, floor and paving etc complete all as specified as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub floor, sub base, floor and paving etc in size of panel 2X2 mtr minimum using with Glass dividing strips,complete all as specified as directed.

M&L for Plastic dividing strips, 1.5mm thick inserted in position,conform to design and 38mm wide complete all as specified and directed.

M&L for PCC type C-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection and sub floor, sub base, floor and paving etc etc complete all specified as directed.

M&L PCC 1:2:4 Type B-1 using 20mm graded crushed stone aggregate as in roof kerbs, Chajja of window/ventilator or mud stops and kerb stone in sides of inerlocking tiles including slightly rounded or chamfered angles and throating as complete all as specified and directed.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Supply only smart care normal tile ahhesive for floor and wall.technical specification appended below, Make : Asian/Berger/Birla care) complete all as specified and directed. Note :- 1- Coverage 2-2.50 sqft/kg for a bed of 3 -4 mm thick 2- kind of tiles can be installed in floor or wall 3-Curing Time 24 hour

M&L for coloured elevation tiles in verticat surface 9 to 10 mm thick joint less tiles ( rectangular ) area of each tiles exceeding 0.12 sqm but not exceeding 0.38 Sqm in wall etc including fixing with neat cement based approved chemical adhesive reqd for tiling as backing coat complete all as specified and directed.note; material of adhesive will be supplied and measured separately.

M&L for ceramic tiles coloured 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc.including fixing with neat cement based approved chemical adhesive reqd for tiling as backing coat complete all as specified and directed.note; material of adhesive will be supplied and measured separately.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick joint less tiles set and including fixing with neat cement based approved chemical adhesive reqd for tiling as backing coat complete all as specified and directed. Note : Material of adhesive will be supplied and measured separately.

M&L for double charged Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.32 Sqm but not exceeding 0.72 Sqm each in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 14,912.50 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

M/S AVANI TRADERS (BID ID -3469197)

MS BHAVANA ENTERPRISES (BID ID -3473554)

Vijay Builders (BID ID -3469163)