SPL RPR TO EXISTING BLACK TOP ROAD APPROX 900 M WITHIN THE UNIT AREA AT 3 PARA (SF) AND BITUMINOUS HARD STANDING OF ROAD MT AREA (85X17MTR) OF 251 FD WKSP COY EME AND SPL RPR TO ROAD 325X3.5 MTR AT MAIN MT LOC OF 90 FD REGT UNDER ZONE III AREA AT JPR

Amount

Surface dressing not exceeding 15 cm deep for the road side berm and getting out in soft/loose soil including removing grass/vegetation up to roads and removing to a distance not exceeding 50 metre all as specified and directed .

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm and depth not exceeding 50 mm all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50 mm but not exceeding 100 mm all as specified and directed.

Repair to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, but making good by applying tack coat at 5 Kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone chippering, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). Depth of potholes exceeding 30mm complete all as specified and directed.

M&L for preparing the black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying priming/tack coat with bituminous primer (VG-30) viscosity grade @ 5Kg/10 Sqm complete all as specified and directed.

M&L for laying bituminous asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or more) with paving bitumen 4%binder (viscosity grade VG-30) contents all as specified and directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width complete all as specified and directed.

S&F in repair a cat eye standered quality solar stud aluminium ally and PC construction solar powered by monocrystal solar panel type battery one high capacity Nicd rechargeable battery view distance approximately 1000 Mtrs, LEDs 010 mm, 3 PI model No SE 501 M/s Sun Traders or DA dark Eye and M/s Tata VPI as or equivalent all as directed by Engineer-in-Charge.

M&L for moorum/red bajri filing in floors or paving laid in layers n.exc 15 cm thick spread, levelled and rammed including watering all as specified and directed.

Schedule of Credit

Ms Hari Deva Builders

AMIT RISHABH BUILDERS PVT LTD

Shiv Construction Company

m/s nemichand contractor