REPAIR / REPLACEMENT OF ALUMINIUM DOOR, WINDOW, CEILING AND OTHER ALLIED B/R E/M WORKS UNDER GE (AF) SRINAGAR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm, complete all as specified and as directed by the Engineer-in-Charge.

Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sqm and not exc. 2 Sqm each and refixing in same opening complete all as directed by Engr-in-charge.

M&L for Easing of Aluminium Door /shutters/CB (One unit shall comprise of one window/CB/Showcase irrespective of numbe of leaves) for properly closing/opening, tightening of Nut, Bolt and screws, adjustement of tower bolts, sliding bolt etc replacement of rubber beading complete all as specified and directed.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed by Engineer-in-Charge

M&L for Powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, 150 mm handles 2 Nos in each door shutter, 100 mm hinges-03 Nos, 150mm tower bolt -02 nos in each shutter anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21, 100mm long (2 no) suitable handle (1 no), complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium composite panels, 5mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified.

S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty/wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair Figured Glass pin head type 4mm thick n exc 0.5 Sqm and glazing with oil putty, Complete all as specified and directed by Engineer-in-Charge

S&F 100 mm size butt hinges, Stainless Steel complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete .

S&F 150 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repair stainless steel lock for aluminium door, size 100 mm , 2 levers complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular including hacking out old broken glass, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of Overall length of cover plate 140 mm all as specified and directed by Engineer-in-Charge

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair Aluminium (Extruded Section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

M&L for wooden panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coat of french polishing on all the exposed surfaces wooden panelling including taking down existing Boarding and also taking down existing electrical fittings and re-fixing the same locations as directed complete all as specified and as directed by Engineer-in-Charge.

M&L for ACP wall cladding 4mm thick fixing with 25x40mm aluminium tube section or as per manufacturer instruction including joint filling and taping, necessary arrangement and colour will be as approved by GE including taking down existing PGI sheets complete all as specified and directed.

S&F stainless steel alphabets letters Hollow type, glossy finished, fabricated with 1.00 mm thick stainless steel sheet of grade 304 of Letter height exc 300mm but not exc 450 mm and letter thickness 25 to 30 mm including fixing arrangements (Font of letters as directed by Engr-in Charge) complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F in repair Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engineer-in-Charge.

M &L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including necessary jointing and taping, and applying 1mm thick putty to receive finishes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 12mm thick Particle board for insulation purposes as in false ceiling, fixed with nails to timber framework design and pattern of board as approved by Engr-in-Charge.

M&L for second class hardwood fillets bullnosed, splayed, chamfered or rounded on one edge or face of exc 13 Sqcm but not exc 25 sqcm in repairs, secured with nails or screws in repairs , complete all as specified and directed by Engineer-in-Charge.

M&L for clean sawn second class hardwood in scantling timber, complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick Non asbestos fibre cement building fixed or laid/inserted to timber/GI/Aluminium framework with screws to ceiling flat or sloping, fixed in repair complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previouly untreated plaster/ AC sheet/Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour/tint complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thick cement concrete (1:3:6) type C-1(using 20mm graded stone aggregate) as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement.

M&L Cement concrete Type D2 1:4:8 (40 mm graded aggergate) in foundations, filling and mass concrete

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc incl removal of rubbish out of defence land complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1: 6, using old size bricks complete all as specified and as directed by Engineer-in-Charge.

All as per item No 39 above here-in-before but except bricks.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by the Engineer-In-Charge. (The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg).

M&L for rendering 15 mm thick on other than fair faces of brick wall finished fair & even in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:4 complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filling including preparation of surfaces on walls as specified and directed .

M&L preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L Preparing of new surface of wall and applying two coats of cement based paint over one coat of primer, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises.

M&L Coloured digital Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat,complete all as specified and directed.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.

M& L double Charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed.

All as per item No 53 here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4 complete all as specified and directed.

Material and labour for 1st quality 400mmx 400mm vitrified parking tiles in approved shade in minimum 10 mm thickness, in floors etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Make :Johnson Endura meteor (Korneto Biege) or equivalent.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern) suitable for children, white (excluding fixing bolts, flushing cistern and flush pipe), etc complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, shelves and similar suspended work complete.

M&L RCC 1:1.5:3 type A-1 (using crushed stone aggregate)as in chajjas / cooking shelves / platform etc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the surface in contact with form surface complete all as specified and as directed by Engineer-in-Charge (The rate quoted by the contractor shall included forform work.)

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed.

S&F in repair Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete all as specified and as directed by Engineer-in-charge

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F in repair sinks board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed

Taking down 15 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

Refixing old GI tubing and connections, 15 mm dia, in old or new position. (walls, ceiling, floors, etc.) completed all as specified and directed.

M&L tubes 15 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old GI tubing and connections, 20 mm dia, in old or new position. (walls, ceiling, floors, etc.) completed all as specified and directed.

M&L tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F grating doom 100mm dia size with PTMT complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

S&F in repairs 15 mm dia Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water with leg for shower mixture, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Jet Spray of Standard size for EWC alongwith CP connection pipe and all fittings as fixed Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP Health faucet fixed with spring action and lever along with health faucet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs two way stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs two way bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F in repair Glass Shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms), complete all as specified and directed.

S&F in repair Corner Glass Shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms), complete all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including trap set complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm aps, waste, chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe complete all as specified and directed.

S&F in repairs, Toilet paper holder of brass CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge

S&F in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China urinal half stall type suitable for children, white , with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colour for fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete.

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F Magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-In-Charge.

S&F Piano type hinges of brass with 30 mm flap width complete all as specified and directed by Engineer-In-Charge.

S&F 20 mm Stainless steel curtain rod with stainless steel bracket and satinless steel finols, fancy type as approved by GE, as in curtain rods including taking down the old unserviceable pelmet box/curtains rods complete all as specified and directed by Engineer-In-Charge.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

S&F in repair 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in Kitchen drawers etc complete all as specified and directed.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions , complete all as specified and directed.

S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004. complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F second class hardwood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

S&F second class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats , complete all as specified and directed.

S&F 1 st class hardwood small fittings such as brackets of any type,latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 cucm each including 50 mm butt hinge, complete all as specified and directed.

M&L for Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded , complete all as specified and directed.

All as per item No. 116 above but with out Glazing bars complete all as specified and directed.

S&F Steel ventilators with top Hung shutter including hinges, Steel peg stay, complete all as specified and directed.

S &F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane , complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and as directed by Engineer-in-Charge

M&L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142 gms) complete all as specified and directed by Engineer-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

All as per above Srl item No 129 but except Sheets

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work, complete all as specified and directed.

S&F rolled mild steel Fe 410-W (Gde-E-250 quality A) rolled section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius with acess door, complete all as specified and directed.

S&F in repair 1.5mm thick Polycarbonate sheet fixed with self tapping stainless steel screw and washer complete all as specified and directed by Engineer-in-Charge.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed by Engineer-in-Charge.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed by Engineer-in-Charge.

M&L for etching on toughened glass designed and pattern as approved by Engr-in-Charge

S&F stainless steel handle 450mm size & 25mm dia suitable for toughened glass door complete all as specified and directed by Engineer-in-Charge.

S&F 2 levers stainless steel floor lock suitable for toughened glass door complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated superior quality venetian blinds horizontal or vertical type complete all as specified and directed by Engineer-in-Charge.

S&F in repair viterous china counter type top wash hand basin of size 550mmx 400 mm including, CP coupling, rubber washer etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittingS&Fixtures and making good disturbed surfaces of wall , floor etc and matching with original colour of wall, complete, all as specified & directed.

Material and labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistranded) PVC insulated ISI marked unsheathed cable 1100 volts grade in and including concealed/surface , non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories including PVC insulated ISI marked unsheathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly concealed in wall/ceiling, modular MS box with modular cover plate and frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan/bell point controlled by one way switch 6 amps 240 volts

S&F modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc complete as specified and directed. Make- Legrand/ ABB/ Havells or equivalent approved by GE

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed. Make- Legrand/ ABB/ Havells or equivalent approved by GE

Lamp holder PVC/polycarbonate type with back plate suitable for batten fitting incl 10 watt LED lamp etc complete all as specified and directed

S&F in repair decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 16 watt luminaire ,complete all as specified & approved by Engr-in-charge .Make:-Wipro /Havells /Crompton

S&F in repair Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser with 10 LED lamp etc complete as specified and directed by Engr-in-charge Make:- Wipro / Havells/ Crompton

S&F recess/ surface/ suspended mounted LED 36 watt ultra slim ceiling light with extruded aluminium housing and milky diffuser complete as specified and directed. Make: Wipro Cat Part No CRCO10R038HP57GL1 or equivalent in Havells /Crompton

S&F recess/ surface/ suspended mounted LED 18 watt ultra ceiling light with extruded aluminium housing and milky diffuser complete as specified and directed. Make: Wipro Cat Part No LD96-221-XXX-60-XX*** or equivalent in Havells /Crompton

M/S TARIQ AHMAD SHEIKH

NAJAR ENTERPRISES