N.I.T. No. 29 2022 23 Item No.5

Providing/fixing of Pump Control Panels for Delhi gate filling point with alarm system in case of any failure occurs in operation of motor pump sets, to control the operation of the 2 Nos. Sub. Pump sets having capacity 15 HP installed in the effluent pump house by sending the wireless signal from transmitter panel to be installed near filling point to each starter panel to be installed in Delhi gate filling point and the motor pump sets should be operable from both panels as per requirement comprising of the following- Transmitter panel near filling point having suitable arrangement of transmitting the signal to starter panel by making connection with existing supply consisting of following - 04 Nos. ON/OFF indication Make: - L&T / ABB / Schneider/DJB Approved, 10 Nos. Start/Stop PB Make: - L&T / ABB / Schneider/DJB Approved, installation of the panel having size 500x300x150mm, MS sheet size of 16 SWG mounted on the frame of MS angle iron size 50x50x6mm having height 900mm by making foundation on surface/grouting.

Starter panel having suitable arrangement of receiving the signal from transmitter panel to each starter panel consisting of following: - 15 HP Star / Delta Starter with automatic phase sequence correction and phase failure protection Qty -2nos to be connected with existing main supply panel with following total material for 1 Nos. MCCB with spreader terminals and operating handle TP 100 Amp, 36 kA Motor Duty Suitable for 15 HP Make:-Siemens/L&T/ABB/ Schneider / Havells/DJB Approved, 6 Nos. Contactor TP 40 Amps AC3 Duty 220 VAC Make: - Siemens/L&T/ABB /Havells /Schneider/DJB Approved, 2 Nos. Thermal Overload Relay 17-21 Amps and 2 nos contactor TP 70Amp AC3 , 1 no. on delay timer Make: - Siemens/L&T/Havells /ABB/Schneider/DJB Approved, 1 Nos. Single Phase / Phase Reversal Protection Make:- Minilec / L&T/DJB Approved, 2 Nos. Start / Stop PB Make: - L&T / ABB / Schneider /DJB Approved, 2 Nos. Star / Delta Timer Make: - Siemens/L&T/ABB/Schneider/ Havells/DJB Approved. Size of each starter panel 1000x800x400 mm of MS Sheet size 16SWG on frame of MS angle iron size 50x50x6 mm having height 450mm by dismantling the existing system and placing the starter panel on the same by making suitable arrangement and connection with the individual motor pump set Control consisting of following: - 5 Nos. Control MCB DP 10 Amps Make: - Siemens/L&T/ABB/Schneider /Havells/DJB Approved, 5 No. Control On Indication Make:- L&T/ ABB/ Schneider/ DJB Approved.

Miscellaneous Material - Powder Coated Panel Enclosure with accessories Make: - DJB Approved, Suitable Control wire as per requirement and direction of engineer in charge Make: - DJB Approved, Suitable Power Wire Make: - DJB Approved, Lugs / Glands as required for connections.

Installation, Testing & commissioning of the panel as above mentioned & other accessories with relevant IS as follow Check equipments specification, Continuity and earthing, MCCB mechanism and alignment, Meggaring of all equipments for phase to phase, neutral to earth and phase to earth, All functional tests, Checking for all tightness of nuts and bolts, Alignments of doors etc, Interlocking tests as per requirement of site and direction of engineer in charge

M/S AMIT GAUTAM