GE I R AND D/CHD-10/2023-24 REPAIR/MAINTENANCE OF STEEL FURNITURE, WOODEN FURNITURE AND MISC WORKS AT DIHAR LEH

Amount

REPAIR TO ALMIRAH LARGE STEEL : Removing unserviceable 3 way locking device complete excluding lock & handle and S&F new 3 way locking device made to shape as required all as specified and directed.

Removing existing unserviceable lock of Almirah Large steel & S&F new lock of brass five levers with duplicate keys and fixing in proper functional position as original shape all as specified and directed. Make : RAINA/REENA/BAJRANG

Removing of existing unserviceable handle of Almirah Large Steel & S&F new handle of CP Steel heavy duty including necessary nuts, bolts, washers etc all as specified & directed by Engr-in -Charge.

Removing of existing unserviceable legs of Almirah large steel & S&F new leg made of 1mm thich MS sheet made to shape and provideing two coats of olive green or silver grey paint over a coat of red oxide primer all as shown on drawings and directed by Engr-in -Charge.

REPAIR TO ALMIRAH MEDIUM STEEL : All as per serial item No 1.00 here-in-before but Almirah Medium Steel.

All as per serial item No 1.01 here-in-before but Almirah Medium Steel

All as per serial item No 1.02 here-in-before but Almirah Medium Steel

All as per serial item No 1.03 here-in-before but Almirah Medium Steel

Repair of almirah medium steel by using wooden plank of min thickness 2 inches on side of almirah and making doors using wooden ply/plank of min thickess 2 inches including 1 pair SS handle and key and lock arrangement including two key lock complete.

REPAIR TO TABLE OFFICE OFFICERS/CLK STEEEL Repair of almirah medium steel by using wooden plank of min thickness 2 inches on side of almirah and making doors using wooden ply/plank of min thickess 2 inches including 1 pair SS handle and key and lock arrangement including two key lock complete.

Removing of existing old unserviceable drawers of table office clerk steel / officers and replacing with new drawer made out of 1mm thick MS sheet made to shape all as spd and directed by Engr-in-charge.

REPAIR TO TABLE TOP : Removing existing unserviceable top of table dining Ors and providing new top of size 1920x680mm made out of 18/19 mm thick commercial block board (BWR) medium density covered with 24 gauge aluminium sheet 12 Nos screws wood steel CSK of sizes 40mm for fixing the table top all as shown in drgs and as directed by Engineer-in-Charge.

Replacement of unserviceable top of table office officer/ clerk/ typist steel, Teapoy Varandhah, Table 900 x 900 x 760 mm steel (with or without drawer) and Table 900 x 900x760mm steel with new 18mm thick prelaminated particle board (exterior grade) one side decorative choice lamination and other side balancing white with teak wood beading 4mm thick alround the top all as specified and directed by Engr-in-Charge.

REPAIR TO CHAIR TUBULAR WITH ARMS /WITHOUT ARMS : Removing existing unserviceable seat from chair Tubular Steel with arms S&F new seat made of hard wood (teak) duly canned with 2mm wide half round white plastic cane of Brand "Shah" in Godrej Pattern cross bands and borders, fixed with suitable nuts, bolts and washers all as specified and as shown in Drgs.

Removing existing unserviceable seat from chair Tubular Steel without arms S&F new seat made of hard wood (teak) fixed with nuts, bolts washers etc duly canned with 2mm wide half round white plastic cane of Brand "Shah" in Godrej Pattern cross band and borders all as specified and as shown on Drgs.

Provision in replacement of Flat iron Stiffener two numbers at required place on each chair tubular steel size 430 x 25x 3mm to rest the seat. Flat iron shall be fixed with gas welding all as specified and directed.

PAINTING : Material and labour for denting where ever required making the surface smooth after removing the old paint, filling putty at required places and M&L spray paint (two coats of synthetic enamel paint) externally to Almirah Large steel of OG/grey/white shade of 1st quality synthetic enameled paint make : Shalimar /Johnson/ Nicholson make and brand as approved by GE all as specified and directed.

All as per serial item No 6.00 above but internally and externally both

All as per serial item No 6.00 above but Almirah Medium Steel

All as per serial item No 6.00 above but both internally and externally

All as per serial item No 6.00 above but Locker steel (internally and exteranally)

All as per serial item No 6.00 above but Table office officer (complete)

All as per serial item No 6.00 above but Table office Clk (complete)

All as per serial item No 6.00 above but Table Dining OR's (Steel portion only)

All as per serial item No 6.00 above but table 900 x 600 x 760 mm steel (with or without drawer) (complete)

All as per serial item No 6.00 above but Chair CBA steel with arms (complete)

All as per serial item No 6.00 above but Chair CBB steel without arms (complete)

CHAIR DINNING : Taking out existing unserviceable broken wooden rear leg from chair dining and supply & fixing new leg of required size and shape made of seasoned teak wood, all as shown in drg and directed.

All as per serial item No 7.00 above but front leg

All as per serial item No 7.00 above but rail of seat duly holed for canning.

All as per serial item No 7.00 above but back member

Polishing of chair dining with french polish completed all as specified and directed.

CHAIR WRITING / CHAIR EASY : Taking out existing unserviceable / broken wooden real leg from chair writing and supply and fixing new leg of required sizse and shape made of seasoned teak wood, all as shown in drgs and as directed.

All as per serial item No 8.00 above but front leg

All as per serial item No 8.00 above but rail of seat duly holde for canning

All as per serial item No 8.00 above but back member of chair writing

All as per serial item No 8.00 above but arm rest of chair writing

Polishing of chair writing with french polish completed all as specified and directed.

Repair/replacement of old wooden/iron,wheeled /non wheeled chair with new chair all as specified and directed by Engineer-in-charge complete.Note-model ,colour of chair will be decided by Engineer-in-charge available in leh market.

TABLE DINING SIX/EIGHT PERS : Taking out existing unserviceable / broken wooden real leg from table dinning 6 pers / 8 pers and S&F new leg of required size and shape made of seasoned teak wood, all as shown in drgs and as directed.

All as per serial item No 9.00 above but front/back rails of table dining (8 Persons)

Polishing of table dinning 6/8 person with french polish completed all as specified and directed.

TABLE CENTRE : Taking out existing unserviceable / broken leg from centre table and S&F new leg of required size and shape made of seasoned teak wood all as shown in drgs and as directed.

All as per serial item No 10.00 above but Front/rear rail

Polishing of table centre complete with french polish all as specified and directed.

PEG TABLE : Taking our existing unserviceable/ broken leg from peg table and S&F new leg of required size and shape made of seasoned teak wood all as shown in drgs band as directed.

All as per serial item No 11.00 above but side rail.

All as per serial item No 11.00 above but front/rear rail.

Polishing of table peg with french polish complete all as specifed and directed.

BED PLYTOP : Taking out existing unserviceable / broken head board from bed ply top and S&F new head board. Frame of the head board shall be made of teak wood duly covered wit 6 mm thick plywood one side teak faced (ISI Marked) in front & 6 mm thick commericial ply wood (ISI Marked) in back, with beading of required size alround the head board made of teak wood all as shown in Drgs and as directed.

All as per serial item No 12.00 above but foot board

All as per serial item 12.00 above But ply wood top 12 mm thick commercial, 7 ply BWR Gde tupe BB ISI Marked of approved Make on the top of Bed, all as shown on Drgs and as specified.

Polishing of Bed plywood top / Bed Newar with french polish complete all as specifed and directed.

Removing of existing unserviceable broken cane of various furniture articles, cleaning of holes, recanning of there articles with white colour plastic cane 2mm wide 0.3 mm thick half round with beading of 4mm wide plastic cane partially rounded & cross bands at centre to centre of seat. Canning shall be as per Godrej parttern all as specified & shown on drgs. Cane of Shah/ Kohinoor make.

Removing existing unserviceable / broken top ot tables of different size and supply and fixing new tops of prelaminated particel board 18/19mm thick interior grade of natural teak face prelaminated one side with declorative choice lamination and other side balancing white provided with 4x18/19 mm teak wood beading alround and fixed with screw wood steel of appropriate size complete all as shown on drg and duly polished with french polich all as specified and directed.

REPAIR TO SOFA SETS : Removing of exisitng old unserviceable legs from sofa sets and S&F new legs of seasoned teak wood duly polished as per drg and directed by Engr-in-Charge.

All as per serial item No 15.00 above but arms

All as per serial item No 15.00 above but front/back long rail of 3 seater.

Removing of old unserviceable cloth from sofa cushion and S & F new tapestry cloth (upholstrey) as approved by GE/Engr-in-Charge. The cost of tepestry cloth not less than Rs 250/- per mtr all as specified and directed by Engr-in-Charge.

Removing of old unserviceable cushion of sofa set and supply and fixing cushion of size 560 x 530 x 100 mm of cool foam of 32 density duly covered with best quality tapestry cloth as approved by GE/ Engr-in-Charge. The cost of tepestry not less than Rs 300/- per mtr. Cushion shall be make of : Sleepwell /Kurlon all as specified and directed by Engr-in-Charge.

Polishing of Sofa set 3/5 seater with french polish complete all as specified and directed by Engr-in-Charge.

Polishing of Sofa set single seater with french polish complete all as specified and directed by Engr-in-Charge.

CHAIR COMPUTER / REVOLVING : Removing of old unserviceable rolling wheel and S&F of new wheel of Godrej make as directed & approved by Engr-in-Charge.

Removing of old unserviceable revolving, tilting mechanishm and S&F of same of Godrej make as directed & approved by Engr-in-Charge.

Removing of old tapestry /Rexine cloth of seat & back of chair and S&F (upholstery) of new tapestry cloth / rexine of existin cushion not less than Rs 200/- per mtr as approved by Engr-in-Charge.

CHAIR DINNING LONG BACK : Removing of old unserviceable rear legs with back and S&F of new legs with back of seasoned teak wood all as per drg.

All as per srl item No 17 (a) above but front leg

All as per srl item No 17 (a) above but rails

Removing of old tapestry cloth and foam of cushion for both seat and back of chair and S&F (upholstery) of new tapestry cloth and foam of cushion make 50mm thick of 32 density of Make - Sleepwell / kurlon as directed and as per drg. Note :- Cost of tapestry cloth should not be less than Rs 350/- per mtr as approved by Engr-in-Charge.

Polishing of chair dining long back with french polish, complete all as specified and directed.

Modification / conversion of charpoy GI pipe & Nylone Neewar into hard ply top by providing 12mm thick ply wood, ISI marked, BWR grade, commercial both side.including High Density PU Foam min of 6 inch thick Mattress with 36 month warranty Comfort level : Extra Soft Make :- Sleepwell/Kitply/ Century/ National of size 1950 x 900 mm complete all as specified and as directed by the Engr-in-Charge

national engineering

M/S SK TRADERS