CONSTRUCTION OF VARIOUS TRANSMISSION ELEMENTS (CONSTRUCTION OF VARIOUS 220KV AND 132KV TRANSMISSION LINES) ASSOCIATED WITH 220KV GSS KHOHRAMULLA-MATASULA(DAUSA)IN RAJASTHAN WITH INSTALLATION OF OPGW NETWORK ON EXISTING LINE(TURNKEY) BN-9018002528

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

70 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

120 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

Hardware Fittings for ACSR Zebra Conductor

Single Suspension H/W fittings for ACSR Zebra Conductor

Single Tension H/W fittings for ACSR Zebra Conductor

Double Tension H/W fittings for ACSR Zebra Conductor

Accessories for ACSR Zebra Conductor

Mid Span Compression Joint for ACSR Zebra Conductor

Repair Sleeve for ACSR Zebra Conductor

Preformed Armour Rod for ACSR Zebra Conductor

Vibration Damper for ACSR Zebra Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box (++)

Joint box (48Fibre)

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard rock (with blasting subject to permission or without blastins)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(iii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

(i) Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Zebra including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Installation of OPGW

Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE

Installation Hardware set for above 48Fibre OPGW cabling including of al cable fittings and accessories exept joint Box (++)

JOINT BOX (48 FIBER) OPGW CABLE

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(C) Random rubble dry pitching including preparing surface etc. complete with raised & cut pointing in cement sand mortar 1:3 curing etc.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thick nominal size aggregate

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Sub Station Structures all types

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

70 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

120 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

Hardware Fittings for ACSR Panther Conductor

Single Suspension H/W fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Suspension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSR Panther Conductor

Preformed Armour Rod for ACSR Panther Conductor

Vibration Damper for ACSR Panther Conductor

G I Earth wire7/3.15

Strain Assembly for earth wure 7/3.15 with copper earth bond

Suspension Assembly for earth wure 7/3.15 with copper earth bond

Vibration Damper for Earth wire 7/3.15

Mid span compression joint for Earth wire7/3.15

Repair sleeve for earth wure 7/3.15 with copper earth bond

Post insulator (132 kV)

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard rock (with blasting subject to permission or without blastins)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(iii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

(i) Erection of tower (with extension upto 9 Meters)

Ereection of sub station structures including leveling, setting of stub & tightning, punching of bolts and tack welding upto beam level as per specifications.

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

EarthwireStringing :- (A) Stringing of galvanised steel stranded wire including laying,jointing & tensioning, clamping,clipping and fixing vibration damper and earth bond etc.

(i) One No. 7/3.15 mm galvanised

Erection of Post insulator already erected structure including transportation of PIS , Nut and bolts , clamp and connectors , etc. from site store to location , febrication of base frame and assembly if required fixing of clamp etc

132 KV Post insulator

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(C) Random rubble dry pitching including preparing surface etc. complete with raised & cut pointing in cement sand mortar 1:3 curing etc.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thick nominal size aggregate

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Sub Station Structures all types

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

70 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

120 KN Disc Insulators

Long Rod Insulators

Composite Long Rod Insulators

Hardware Fittings for ACSR Panther Conductor

Single Suspension H/W fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Suspension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSR Panther Conductor

Preformed Armour Rod for ACSR Panther Conductor

Vibration Damper for ACSR Panther Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box (++)

Joint box (48Fibre)

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Post insulator (132 kV)

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard rock (with blasting subject to permission or without blastins)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(iii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

(i) Erection of tower (with extension upto 9 Meters)

Ereection of sub station structures including leveling, setting of stub & tightning, punching of bolts and tack welding upto beam level as per specifications.

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Installation of OPGW

Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE

Installation Hardware set for above 48Fibre OPGW cabling including of al cable fittings and accessories exept joint Box (++)

JOINT BOX (48 FIBER) OPGW CABLE

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Erection of Post insulator already erected structure including transportation of PIS , Nut and bolts , clamp and connectors , etc. from site store to location , febrication of base frame and assembly if required fixing of clamp etc

132 KV Post insulator

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(C) Random rubble dry pitching including preparing surface etc. complete with raised & cut pointing in cement sand mortar 1:3 curing etc.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thick nominal size aggregate

Any Other Item

Description of Work / Item(s)

Amount

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box (++)

Joint box (48Fibre)

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Destringing of Earthwire (7/4.0mm) with depositing in nearest RVPN Store with E/W 7/4.0 mm SUS ASS with CU E/B, Vibration Damper for E/W 7/4.0 mm , Damper E/W 7/4.0 mm for E/W 7/4.0 mm Strain Assembly CU E/B.

Earth wire 7/4.0 mm

Installation of OPGW

Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE

Installation Hardware set for above 48Fibre OPGW cabling including of al cable fittings and accessories exept joint Box (++)

JOINT BOX (48 FIBER) OPGW CABLE

FODP 48 F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approcah Cable

48 Fiber (DWSM)

Installation hardware set for above 48 Fiber, Fiber Optic Approach Cable (++)

Any Other Item

INVENTIVE SOFTWARE SOLUTIONS PVT LTD (BID ID -3322291)

Vikran Engineering Limited (BID ID -3361197)

Vikran Engineering Limited (BID ID -3361197)

Kintech Synergy Private Limited (BID ID -3333034)

INVENTIVE SOFTWARE SOLUTIONS PVT LTD (BID ID -3322291)

Vikran Engineering Limited (BID ID -3361197)

Vikran Engineering Limited (BID ID -3361197)

Kintech Synergy Private Limited (BID ID -3333034)

INVENTIVE SOFTWARE SOLUTIONS PVT LTD (BID ID -3322291)

Vikran Engineering Limited (BID ID -3361197)

Vikran Engineering Limited (BID ID -3361197)

Kintech Synergy Private Limited (BID ID -3333034)

INVENTIVE SOFTWARE SOLUTIONS PVT LTD (BID ID -3322291)

Vikran Engineering Limited (BID ID -3361197)

Kintech Synergy Private Limited (BID ID -3333034)

Vikran Engineering Limited (BID ID -3361197)