Provision of Toilet Block Near Building No. T-07 (TRG HALL) at MH Varanasi Under GE (East) Allahabad.

Amount

Surface excavation not exceeding 30cm deep & averaging 15 cm deep in soft / loose soil and getting out complete all as specified & directed.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth exceeding 1.5 m and not exceeding 3.0 m deep in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Material & Labour for hard core broken stone of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, levelling and rammed to a true surface complete all as specified & directed.

Material & Labour PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed.

Material & Labour for reinforced cement concrete M-25 grade design mix using 20mm graded crushed stone aggregate as in foundation including rafts, footing, foundation beams, plinth beam, base of coloumn etc & mass concrete complete all as specified & directed.

Material & Labour for reinforced cement concrete M-25 grade design mix using 20mm graded crushed stone aggregate as in beam, cantilever beam or lintel over 1.5m span or similar works complete all as specified & directed.

Material & Labour for reinforced cement concrete M-25 grade design mix using 20mm graded crushed stone aggregate as in coloumn, pillars, piers, posts & struts or similar works complete all as specified & directed.

Material & Labour for reinforced cement concrete M-25 grade design mix using 20mm graded crushed stone aggregate as in slab supported on walls, beam and coloumns, landing cover, beams, cantilever beam or lintel / lintel bands or similar works complete all as specified & directed.

Material & Labour for reinforced cement concrete M-25 grade design mix using 20mm graded crushed stone aggregate as in chajjas supported on walls, beam and coloumns, landing cover, beams, cantilever beam or lintel / lintel bands or similar works complete all as specified & directed.

Material & Labour formwork to sides & soffits of concrete foundation, footings, bases of columns, rafts, raft beams of foundation and plinth beams; and similar work; vertical or batter; rough finished surfaces of concrete complete all as specified & directed.

Material & Labour formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings slab and similar work; not exceeding 200 mm thick (Horizontal or slopping) fair finished flat surfaces complete all as specified & directed.

Material & Labour form work to side & soffits of beams such as roof beams, floor beams, landings beams & similar work (Horizontal or slopping) fair finished flat surfaces complete all as specified & directed.

Material & Labour formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular fair finished surfaces of concrete complete all as specified & directed.

Material & Labour formwork to soffits of chajjas including its edges flat rough finished flat surfaces complete all as specified & directed.

Material & Labour formwork to sides or edges of concrete flats and similar works exceeding 100 mm & not exceeding 150 mm wide with rough finished flat surfaces complete all as specified & directed.

Material & Labour mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Material & Labour mild steel TMT bars 6 to 8 mm dia used as in stirrups, spacer bars & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Material & Labour for brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed.

Material & Labour for brick work in half brick thick wall with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] built in cement sand mortar 1:4 complete all as specified & directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even and smooth without using extra cement complete all as specified & directed.

Material & Labour for 15 mm thick rendering on fair face of brick wall or concrete surface surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement mixed with water proofing compound @ 3% weight of cement complete all as specified & directed. Note : Water proofing compound shall be measured & paid seperately.

Material & Labour for 15 mm thick rendering or screed on roof surface mixed with water proofing compound @ 3 % weight of cement, surface finished even and smooth when surface is wet / green without using extra cement complete all as specified & directed. Note : Water proofing compound shall be measured & paid seperately.

Supply only Integral water proofing compound ISI marked

Material & labour for three coats of white wash on newly plastered surface of walls after preparation of new plastered surface complete all as specified & directed.

Material & labour for three coats of white wash on newly plastered surface of ceilling after preparation of new plastered surface complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls with sand or emery paper and apply two coats of cement base paint over one coat of cement / alkali resistant primer complete all as specified & directed.

Material & Labour 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base to floor or paving or similar work complete all as specified & directed.

Material & Labour 75 mm thick PCC 1:3:6 type C-1 using 20 mm crushed stone aggregate as in plinth protection laid in panel or change in direction or paving or similar work complete all as specified & directed.

Material & Labour forming dummy construction joints 65 mm deep & 10 mm wide filled with sealing compound Grade 'B' complete all as specified & directed.

Material & Labour 40 mm thick PCC 1:2:4 type B-1 using 20 mm crushed stone aggregate as in floors laid in panel or similar work complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

Material & Labour for Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx7mmm or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Material & Labour for exterior designer tile of size 304x304x18-20 mm thick heavy duty and combination with 101x101x18-20 mm thick approved colour and shade, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick screed bed or bedding layers as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Supply & Fixing 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 15mm bore bib tap cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly headed handle screwed both ends for securing iron pipe or for union complete all as specified & directed.

Supply & Fixing 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly headed handle screwed both ends for securing iron pipe or for union complete all as specified & directed.

Supply & fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density PVC float valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-1 complete all as specified & directed.

Supply & Fixing 15 mm bore Angle Valves brass chromium plated fancy type screwed down high pressure with capstan head handle screwed two ends for iron pipe or for unions complete all as specified & directed.

Supply & Fixing vitreous china wash hand basin white flat back of size 550x400mm excluding chain & plug and porcelain stopper but including brackets, PVC waste pipe 32 mm bore 600mm long, chromium plated waste coupling 32 mm dia long shank complete as specified & directed.

Supply & Fixing 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed.

Supply & Fixing in repair position vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making good to match with the existing surface of floor complete all as specified & directed.

Supply & Fixing in repair 10 litre capacity PVC valveless syphonic action type low level flushing cistern white colour including 32 mm bore flush pipe 600 mm long, cantilever brackets PVC ball valve, float and PVC handle, PVC connection 15mm dia 450 mm long complete all as specified & directed.

Supply & Fixing PVC connection 15mm size with PTMT nuts on both ends of length 450mm complete all as specified & directed.

Supply & Fixing vitreous china urinal bowl type white of size 465mm x 355mm x 265mm complete including providing and fixing plugs embedded urinal against walls in cement mortar 1:2 securing urinal to plug with including long steel screws & pointing around urinal back in white cement fixing or connection to flushing cistern with bracket, flush pipe, CP grating and union for discharge pipe (excluding of fixing supply pipe to flushing cistern, trap and waste pipe) including 15 mm PTMT PVC connection pipe 450 mm long complete all as specified & directed.

Supply & Fixing 600 mm long 20 mm dia "D" type chromium plated tubular towel rail between flanges fixed with steel screws complete all as specified & directed.

Material & Labour 125 mm round steel chromium plated with or without centre hole grating fixed with adhesive or cementy solvant complete all as specified & directed.

Material & Labour PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls complete all as specified & directed.

Supply & Fixing PVC (SWR) bends ISI marked with out accessed door of any radius of 110 mm bore pipes jointed with cement solvent or adhesive complete all as specified & directed.

Supply & Fixing PVC (SWR) 110 mm bore single 'T' equal or un equal of jointed with cement solvent or adhesive complete all as specified & directed.

Supply & Fixing PVC (SWR) 110 mm bore branch pieces single 'Y' equal or un equal or un equal jointed with cement solvent or adhesive complete all as specified & directed.

Supply & Fixing PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified & directed.

Supply & Fixing PVC (SWR) floor trap 110 mm dia of out let plain with CP grating jointing with cement solvant or adhesive complete all as specified & directed.

Supply & Fixing PVC (SWR) floor / nahani trap 75 mm dia of out let plain with CP grating jointing with cement solvant or adhesive complete all as specified & directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed.

Material & Labour for 30 mm thick Factory made PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed.

Supply & Fixing 100 mm long butt hinges made with stainless steel with steel pin hinges type B-21 and fixed with steel screws complete all as specified & directed.

Supply & Fixing 150 mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 200 mm long extruded aluminium anodised alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing aluminium anodised window shutters side hung fabricated with 16 gauge aluminium fram e of H section size 34x43.5x1.5 mm [weight not less than 0.57 Kg per RM] and shutter of Z section of size 34x43.5x28 mm [Weight not less than 0.5 Kg per RM] glazzing with 4 mm thick tinted glass sheet, 150 mm long handle and jointing cleats glazing clip, rubber packing aluminiooum beading tower bolt 125 mm long and sliding hinges 180 mm long two number including 75x75 mm diagonally squared grill fitted on window complete all as specified & directed.

Material & Labour for reinforced concrete drain pipes NP-2, laid in trenches of 150 mm Internal diameter of pipe and jointed with cement or jointing material like spun yarn complete all as specified & directed.

Material & Labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate complete all as specified & directed.

Material & Labour cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channel in drain complete all as specified & directed.

Material & Labour precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in drain cover, cover slab (for manholes) and similar work including necessary form work and set in CM 1:4 complete all as specified & directed.

Material & Labour for Cutting into existing manholes for connecting new drains pipes & making good to pipe and surrounding and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore of pipe complete all as specified & directed.

Material & Labour for concealed Point wiring with PVC Insulated 1.5 Sqmm multi-stranded copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm dia (ISI marked) including all fitting and fixings accessories including 1.25 mm thick factory fabricated sunken pressed steel terminal boxes duly painted with one coat of anti-corrosive paint outside and two coats of aluminium paint inside with and including 2.8 mm thick top cover hylam brand plastic laminated white sheet cover for mounting switches, sockets, fan regulators fixed with steel screws with cup wahsers and including PVC Insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed for following poit wirings:---

(a) One light / fan point controlled by one switch

(B) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board.

Supply & Fixing switch piano flush type single pole one way 5 Amps flush type complete all as spicified & directed.

Supply & Fixing socket out let 3 pin 5 Amps complete all as spicified & directed.

Supply & Fixing Ceiling rose surface bakelite type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.

Supply & Fixing lamp holder / pendent holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

Supply & Fixing sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.

Supply & Fixing MCB Single Pole 240Volt, 6 to 32Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed.

Supply & Fixing MCB Single Pole and Neutral 240Volt, 32 Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed.

Supply & Fixing 1x20 watt cool white four feet long decorative box type [Ultra slim] linear LED [6000K] batten retrofit light fittings with extruded aluminium body heat shrink, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire 1.0 RM long & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge. Make : Endura Linear NEO 20 Watt of Havells or equivalent make in Philips Cat Paert No. Smart Bright : BN021C LED 20S PSU CDL GR / Crompton or Bajaj Cat Part No. BLRB 18 W CW as approved by GE.

Supply & Fixing 1x15 watt retrofit LED light ball lamp fiitings, fitted B-22 holder of polycarbonate body and making necessary electric connection with 23/.0076 flexible copper wire 1.0 RM long & fixed to wall firmly complete all as specified & directed.

Supply & Fixing 300 mm sweep exhaust fan with louvers high speed copper wound motor suitable for 230 volt AC supply heavy duty complete with steel body and making necessary electric connection with ceiling rose with copper wire of suitable size complete all as specified & directed.

Supply, laying, fixing or passing through pipe commissioning & testing of XLPE PVC insulated, steel strip or wire armoured heavy duty, electric power cable with stranded aluminium conductor 1100 Volts grade cross section area 10 Sqmm 2 core complete all as specified & directed.

Supply & laying 25 mm bore galvanized steel tubing "medium grade" pipe in trenches / under roads for protection of cable complete all as specified & directed.

Supply & laying 25 mm bore galvanized steel tubing "medium grade" pipe fixed along pole / wall for protection of cable complete all as specified & directed.

Material & Labour for making horizontal bore in through road by trenchless technology under road / PCC path or hard standing for passing of cable including galvanised iron pipe of suitable depth not less than 1.0 metre from ground level including all necessary T&P man power required complete all as specified & directed by Engineer-in-Charge.

Supply & fixing PTMT epoxy coated aluminium rod & high density PVC float valve 20 mm dia screwed for iron pipe complete all as specified & directed.

Material & labour for Local sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified & directed. Note : Punned thickness of sand shall be measured & paid.

Material & labour for Best quality locally available, sub class B bricks (Old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of the cable complete all as specified and as directed by Engineer-in-charge.

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth strip 25x4 mm as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 40mm dia GI pipe light grade for protection of GI eaarthing strip including PCC pit 1:2:4 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm dai # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete. Note :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

M/s Deeksha construction