Repair/Replacement of motor pump, starter of various capacities including connected accessories and allied work at BB Cantt Srinagar.

Amount

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 125HP/100HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- (i) Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, shaft with keys, shaft sleeves with nuts, coupling set, gland and gland packing, eye of impeller, water thrower, suction and delivery covers etc all as directed . (ii) After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. (iii) All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items as supply only.

Supply only Bush bearing made out of bronze for Srl Item No 1.00 above, complete all as specified and directed.

Supply only Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 1.00 above, complete all as specified and directed.

Supply only for Re-metaling of shaft by using brass material for srl item No.1.00 above, complete all as specified and directed.

Supply only Set of pins and Gaskets made out of Mild Steel for Srl Item No 1.00 above, complete all as specified and directed.

Supply only Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 1.00 above, complete all as specified and directed.

Supply only Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 1.00 above, complete all as specified and directed.

Supply only eye of impeller for Srl item No 1.00 above, complete all as specified and directed.

M&L for Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No 1.00 above, complete all as specified and directed.

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 40HP/30HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- (i) Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc all as directed .. (ii) After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. (iii) All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items as supply only.

Supply only Bush bearing made out of bronze for Srl Item No 2.00 above, complete all as specified and directed.

Supply only Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 2.00 above, complete all as specified and directed.

Supply only for Re-metaling of shaft by using brass material for srl item No.2.00 above, complete all as specified and directed.

Supply only Set of pins and Gaskets made out of Mild Steel for Srl Item No 2.00 above, complete all as specified and directed.

Supply only Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 2.00 above, complete all as specified and directed.

Supply only Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 2.00 above, complete all as specified and directed.

Supply only eye of impeller for Srl item No 2.00 above, complete all as specified and directed.

M&L for Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No 2.00 above, complete all as specified and directed.

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 20HP/12.5HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- (i) Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc all as directed . (ii) After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. (iii) All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items as supply only.

Supply only Bush bearing made out of bronze for Srl Item No 3.00 above, complete all as specified and directed.

Supply only Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 3.00 above, complete all as specified and directed.

M&L for Re-metaling of shaft by using brass material for srl item No. 3.00 above, complete all as specified and directed.

Supply only Set of pins and Gaskets made out of Mild Steel for Srl Item No 3.00 above, complete all as specified and directed.

Supply only Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 3.00 above, complete all as specified and directed.

Supply only Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 3.00 above, complete all as specified and directed.

Supply only eye of impeller for Srl item No 3.00 above, complete all as specified and directed.

M&L for Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No 3.00 above, complete all as specified and directed.

M&L for disconnecting the electrical and mechanical connections of motor, and taking out motor for rewinding of centrifugal pump set/non clogging sewage type submersible electric motor by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/fire proof sleeve, varnishing, heating complete and refixing the motor with existing position including testing and commissioning complete all as specified and directed for the following capacities:-

M&L for taking out submersible pump set 60/35HP capacity with 100mm/80mm dia MS coloumn pipes from the bore well of depth upto 100 metres for carrying out repairs and lowering the same in position with new rubber washers, nut and bolts suitable for MS coloumn pipe 100mm/80mm dia after carrying out the repairs including testing and commissioning complete all as specified and directed.

M&L for rewinding of submersible electric motor by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/fire proof sleeve, varnishing, heating complete and refixing the motor with existing position including testing and commissioning complete all as specified and directed for the following capacities. Note for srl item No 1 to 6 (i) The required transportation, Crane and tools shall be arranged by the contractor and cost shall be deemed to be included in the quoted rate. (ii) If any damage occured during repair/testing of pumpset then the responsibility lies with the contractor for rectification without any extra cost.

Supply and fixing following spares suitable for submersible pump set 35 HP including taking down unserviceable spares complete all as specified and directed.

Stainless steel pump shaft

Gun metal pump drive end bush

Gun metal impeller

Stainless steel bush for coupling of motor and pump

Supply and fixing following spares suitable for submersible pump set 60 HP including taking down unserviceable spares complete all as specified and directed.

Gun metal impeller

Stainless steel bush for coupling of motor and pump

S&F of bearing No. 3309 including taking down unserviceable bearing complete all as specified and directed.

All as per srl item No. 9 here-in-before but of bearing No. 6309

S&F of iron rubber coupling set TC 17/16 (ISI marked) including taking down unserviceable rubber coupling complete all as specified and directed.

Description all as per srl item No.11 here-in-before but of rubber coupling TC 15/14

Description all as per srl item No. 11 here-in-before but of rubber coupling TC 13

Description all as per srl item No. 11 here-in-before but of rubber coupling TC 11

S&F gland packing of size 8 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F gland packing of size 10 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F gland packing of size 12 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 150 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 100 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed

S&F manually operated oil immersed star delta motor starter, 60 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed

S&F manually operated oil immersed star delta motor starter, 40 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed

Supply, install, testing and commissioning fully automatic star delta starter with M-5 contactor type, pneumatic timers, overload relay of range 84.6-135 A and having contactor rating 225A to 250 A suitable for 75 HP SUBMERSIBLE pump set including taking down unserviceable starter complete all as specified and directed

Description all as per srl item No. 22 here-in-before but of 40/30 HP

Description all as per srl item No. 22 here-in-before but of 10/12.5/ 20 HP

Supply and fixing DOL starter upto 5 HP including taking down unserviceable starter complete all as specified and directed.

Supply and fixing single phase preventor including taking down unserviceable single phase preventor complete all as specified and as directed .

Supply and filling starter oil for oil immersed starter including draining out the old unserviceable oil complete all as specified and dlirected

Supply and filling of bearing grease suitable for pumpset complete all as specified and directed.

Supply and fixing pressure booster pump 0.5 HP, Head range 35 - 6M, discharge range 900-4200LPH, 230V including taking down unserviceable pressure booster pump complete all as specified and directed.

Supply, laying, connecting & testing in replacement of UG cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heave duty) with aluminium conductor, 1100 Volts grade cross sectional area 3.5 core 25 Sqmm all as specified and as directed.

Supply and fixing in replacement of LT off load change over switch- AC 21(side handle) of 630/400amps ,CPPI approved single door enclosed weather and vermin proof suitable ventilated 415 volts 50 cycles AC supply,factory made fully compartmentalised made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non load bearing protection of enclose and powder coated of approved colour including suitable size angle iron/flat iron frame work/support etc nstallaion, testing and commissioning all as specified and directed.

Repair of servo stabilizer by replacing of burnt core copper winding ,PCB or any other item parts of size 50 to 75KVA by disconnecting with LT Panel and making it functional in all respect maintaining required output voltag e. Price quotated include shifting and transportation to workshop and back to station.

S&F Digital voltmeter 0-500V including taking down unserviceable voltmeter complete all as specified and directed.

S&F Digital ampere meter 0-200A including taking down unserviceable ampere meter complete all as specified and directed.

Supply and filling servo stabilizer oil grade IS : 335 - 1993 including taking down unserviceable oil complete all as specified and directed.

DPD Testing Kit to measure residual free chlorine available in water sample.

Repair of the scrapper mechanism of the Clarifocculator tank of 1.5 lakh gallon capacity by changing coupling ,bearing and gear reduction system including motors replacement of capacity from1to5 hp /repairs including welding work to repair the channel of scrapper either the old or by new channel of required size there by making it operational to avoid settling of dust or floating particles on the floor of the tank and proper sturning action for alum mixing.

Supply only in repair of MCCBs, 4 pole 415 V, adjustable type, 200 Amps with breaking capacity 36 KA all as specified and directed.

Supply only in repair of MCCBs, 4 pole 415 V, adjustable type, 400 Amps with breaking capacity 36 KA all as specified and directed.

Supply only in repair of MCCBs, 4 pole 415 V, adjustable type, 630 Amps with breaking capacity 56 KA all as specified and directed.

Supply only in repair of MCCBs, 3 pole 415 V, fixed type, 25 to 100Amps with breaking capacity 16 KA all as specified and directed.

M/S VALLEY ENTERPRISES

VEDA INFRASTRUCTURE

RISING SUN ENGG WORKS

M/S BILAL CONSTRUCTION AND CO.