PROVIDING AND FIXING SIGNAGE BORAD AND ROAD SAFETY DEVICES AT I.A. BEGRAJPUR DISTT MUZAFFARNAGAR

Amount

Providing and erecting direction and place identifaction retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting the retro rflective sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian condition as per IRC-67 2012 & proof of the same in form of Government report shall be uploaded while quoting tender wide MoRTH clauses 801.3 fixed over 2 mm thick aluminium sheeting with area exceeding 0.90 Sqm. supported on a mild steel angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60cm below ground level as per approved drawing cmplete. as per direction Engineer-in-Chage. NOTE : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signages.

Providing and laying of hot applied thermoplastics compound 2.5mm thick including reflecto rising glass beads @250gms. Per sqm. Area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/Machine material and required for proper completion of work.

Supplying & Fixing of Reflective Raised Pavement Markers (Cat Eye) accordance with X-ASTM D-4956-04. Avery Dennision/3m (USA Make) having body moulded body of polycarbonate, ASA, HIPS or ABS able to support a load 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRTH Circular, its reflective lens made of micro Prismatic lens ( capable of providing total internal reflection of the light) electronically welded to body. The length , height and width iof the body shall not exceed 130mm, 20mm and 105mm respectively. The area of each retro-reflecting surface shall not be less than 13.00Sqcm/. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base to ensure maximum reflectively. It shall be comply to specificaion of category A of MoRTH circular no RW/NH-33023/10/*-DO-III Dated 11.06.1997. Lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P /Machine material and labour required for proper completion of work. NOTE : The Composite warranty jointly signed by original manufacturer & authourized converter of at least 7 years shall be furnished on non judicial stamps of required denomination.

Aluminium-backed flexible prismatic sheeting shall be made of yellow colored flexible prismatic sheeting with non metallic prismatic lens formed in a transparent, synthetic resin as retro reflective elements. This flexible prismatic sheeting shall have black and yellow stripes with aluminium backed flexible prsmatic Type VI sheeting conforming to ASTM: D4956 specifications and standards of coefficient of retro reflectivity, Flexibility and impact resistance applicabl;e for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern inblack color in a continuous roll format. Width of object marker shall be 300mm. The rate shall include all material, labour, T&P, Transportation, installaion and incidentals all complete as per direction of the Engineer-in-Charge.

Supply , Fixing& AMp erection of built up Cantilever Structure 2.40m span comprising of one vertical posts of 7.30mtr height made up of 150mm NB medium class MS Pipe as vertical member welded with 10 mm MS plate at top & amp, 10 mm MS plate at bottom fixing to vertical post as per structure design & amp drawing with one of steel primer and two coats of synthetic enamel paint ant the Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for retro reflection daytime colour and luminance, Shrinkage, flexinbility liner removal adhesion, impact resistance, specular gloss and fungus resisitance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboutatory/ Institute by the manufacturer of the sheeting and in case the certificates is obtained from International condition, Its should also be otained from Indian condition wthion 3 years of launching of product by the manufacture in abroad. Alternativly a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weatherig requirements from a reputed labouratory in India can be accepted provisionaly. In such a situation the Employer/Client if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the rquirement of three years outdoor weathering of the sheeting as per IRC67:2012. Legends, Letters, numerals and border etc should be as per MoRTH Specification No 801.3.7. The work includes construction of RCC Foundation of size 0.60x0.60x1.20m of required depth as per site condition for built up structure including Earth work on Excavation 100mm thick. Lean Concrete in 1:3:6 cement coarse sand and 40mm gauge stone balast. RCC M25 including supply and fixing of 25mm dia foundation bolts 600mm log as per provision of structure design including the cost of reinforcement & amp shuttering. The lateral vertical cleareances and complete. Insallation work shall be as per relvant clauses of MoRTH & amp H specfication section 800 and IRC 67 2012 complete in all respect. The rate shall include cost of design fabrication supply transportation. Local shifting Erection of Signage Structure using crane, inclusive of all taxes etc. all T&P/ machine material and labour required for proper completion of work as per direction o Engieer-in-Charge.