PERIODICAL SERVICES AND REPAIRS TO RCC CHAJJAS FACIA COLUMNS BEAM AND CONNECTED ITEMS TO INTERNAL EXTERNAL SURFACES OF BLDGS AND REPAIR TO COMPOUND WALL FENCING CONCERTINA COIL DRAIN CULVERT AND MISC B R ITEM UNDER C1 AND C1A AREA UNDER GE E MATHUR

Amount

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of cement primer including preparation of surface of wall & including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ceilings and applying one coat of weather proof acrylic exterior paint (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for prepration of old wooden surfaces, exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-In-Charge.

M&L for prepration of old steel surfaces, exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-In-Charge.

M&L for complete removal of exisiting treatment on wall and applying two coat of oil bound distemper including prepration of plaster surface complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coats of white wash complete all as specified and directed by Engineer in charge.

M&L for providing wall care putty on surfaces of wall/ceiling not less than 1mm thick complete all as specified and directed by engineer in charge.

Taking down cement plaster on brick or stone masonry wall incl racking out joints hacking for key , scrubbing down with water etc also as in internal and external surfaces including removing debris off the primes.

M&L rendering 15mm thick on fair face of brick work/concrete surface in CM 1:6 and finishing the surface even and smooth complete all as specified and directed by engineer in charge.

M&L for 10mm thick rendering in cement Mortar 1:3 on ceiling, finishing the surface even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of Oil bound distemper on wall complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash on wall surface complete all as specified and as directed by Engineer-in-Charge.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work/concrete in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L rendering 15mm thick plaster on fair face of brick work/concrete in CM 1:4 and finishing surface even and smooth by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer including preparation of surface of wall and including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed by Enginner in charge.

M&L for obliterating old writing of any description with synthetic enamel paint n.exc 0.10 sqm each to match the existing work complete.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 Cm high complete.

S&F in repair 110mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

S&F in repair 75mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

Demolition of reinforced concrete (cutting reinforcement as required to facilitate demolation of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.

M&L for 50mm thick sand stone slab set and jointed over supports as in chajjas of ground and first floor's windows & doors in cm 1:4 complete.

M&L for Joist, channel, angle, or tee sections, fixed independently,as in chajja of ground and first floors for support of Sandstone slab complete all as specified.

M&L for PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist, angle Channel section for stone slab in chajja upto G+2 floor and shaping horizontal face of groove with cement mortar 1:3 complete.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for repairing the edge / corner of Chajja / roof projection and similar work by removing plaster width / girth exceeding 200 mm but not exc 300 mm and making good with plaster in two coat comprising 10mm thick dubbing coat in CM 1:3 & finishing with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified.

M&L for use & waste of steel form work (rough finished flat) to side and soffits of floor or roof beams, lintels, contilevers sheves including supports etc.

M&L for RCC M-25 grade (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span & similar RCC works all as specified and directed.

M&L for providing precast cement concrete M-15 grade (Nominal mix) using 12.5 mm graded stone aggregate as in louvers and jallies 40mm thick including all mouldings set in CM 1:4 complete.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking nends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per item No 37 above but TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.

M&L for use & waste of steel form work (rough finished surfaces) to soffits of suspended slabs such as roof slabs, landing and similar work n exc 200 mm thick, curved, plain in running condition complete all specified.

M&L for use & waste of steel form work (rough finished surfaces) to edges of concrete flat, roof slabs not exceeding 200 mm thick shelves etc for rough finished surfaces.

M&L for Providing reinforced cement concrete M-25 grade (Design Mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Taking down steel gate by dismantling of pintol hinges replacing by new hinges of MS angle 50x50x6 mm 450 mm long and 16 mm dia MS round 100 mm long pin by welding and fixing with PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate bed block of 200 x 200 x 400mm size and making good including one coat of synthetic enamel paint etc. complete all as specified and as directed by Engineer-in-Charge.

S&F for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintol hinges or steel hanging door etc, (exclusive of steel sheeting or other covering running rails & guides) also fastening and fixing complete.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F MS work as in posts and struts in fencing posts and struts in fencing including cutting tops to shape as directed driling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolt or riveting etc including nut & bolts and similar work confirming to Fe-290 Gde E-165.

M&L for PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate as in foundations filling and mass concrete of manholes etc, complete all as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Dismantling fencing wire mesh, any type.

Supply only chain link MS galvanised fencing any size or type.

Fixing only chain link fencing including line wire mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.

M&L for PCC M-15 grade (Nominla mix) using 20mm graded stone aggregate as in Surface channels and drains etc complete all as specified and directed.

Dismantling galvanised 2 strand, steel barbed wire in fencing.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repair. Note :- Each line wire shall be measured separetely.

Supply and fix galvanised punched type concertina coil of loop dia 600 mm (dia of coil when upstretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire all as specified and directed by Engineer in Charge

Restraining and resecuring including making good staples etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. Note :- Each line wire shall be measured separetely.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) complete all as specified

M&L for 100 mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded aggregate) as in floor sub base complete.

M&L for Chequred Cement concrete coloured tiles glossy finish, rubber moulded with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, over and including 20 mm thick screed bed in CM 1:4 all as specified and as directed.

M&L sand filling under floors including consolidation complete for receiving paver blocks.

S&F Machine pressed precast concrete interlocking paver block with grey cement and pigments of any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 Grade laid over sand cushioning Note:- Sand cushioning shall be measured and paid separately under relavant item of this BOQ.

M&L non skid coloured ceramic ENDURA tiles 10 mm thick, exc 0.06 Sqm but n. exc. 0.11 Sqm set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in CM 1:4.

M&L for 75 mm thick avg thickness PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in floor finishing the surface even and smooth without using extra cement.

M&L for preparing new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members n exc 4 Kg

JWALA ELECTRIC CONTRACTORS

SHRI JI ENTERPRISES

mh enterprises

SHRI RADHAYSHYAM JHA

M/S PREETI CONSTRUCTION

Ahmed constructions

M/s Hoti Lal Contractor

BHARDWAJ CONSTRUCTIONS