Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC AT PO BHEJAPUT DAMANJODI KORAPUT 763008 | KORAPUT | ODISHA | 763008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.4 L+₹4,363.79 (0.18%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹26.1 L+₹1.7 L (7.12%)Rejected-AOC AT BHEJAPUT PO DAMANJODI DIST KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L3 | Rejected-AOC L3 | |
| 4 | L4₹27.2 L+₹2.8 L (11.7%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹28.8 L+₹4.5 L (18.4%)Rejected-AOC ARABINDA VIHAR BHEJAPUT DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L5 | Rejected-AOC L5 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
3 Apr 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM,T and C
REFINERY
CONSTRUCTION OF TRIBAL MUSEUM AT NALCO TOWNSHIP, DAMANJODI
2024_NALCO_801332_1
TnC/AR/03/eC- 2660
Limited
Miscellaneous Works
Item Rate
365 days
Refinery Unit, Nalco, Damanjodi
As per Tender Document
7 documents required · 7 mandatory
₹0
₹40,000
Yes
20 May 2024
18 Mar 2024
4 Apr 2024
18 Mar 2024
3 Apr 2024
18 Mar 2024
18 Mar 2024 - 3 Apr 2024
Amount
2.8.1,Earthwork in excavation in foundation, trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed etc. all compolete as per the specification or instruction of Engg-In-Charge. For depth up to 1.5 mtrs.in all kinds of soil.
2.9.1,For soft rock up to 1.5 mtrs depth.
2.9.3,For hard rock up to 1.5 mtrs depth.( Blasting prohibated)
2.1.1,Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed in all kind of soil etc. all complete as per the direction of Engg-In-Charge.
1.1.1,Transportation/carriage of balance excavated earth after back filling,building debrish,waste material,other garbage materials for disposal at the specified locations/areas,lead up to 2km as per the instruction of Engg-In-Charge.
2.27,Filling of sand under floors in trenches, sides of foundations etc. including supply of sand and watering, ramming, consolidating and dressing etc. all complete as directed by the Engineer-in-Charge.
4.1.3,Providing and laying plain cement concrete (using Nowrangpur or approved quality sand)at all depths below ground level,and up to plinth level, in foundations, fillings, non-suspended floors,for flooring,septic tank,plinth protection,pavement, including tamping, dewatering, curing etc. But excluding the cost of centering and shuttering etc. as specified or directed by E-I-C.in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete [CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE] 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4.1.13,P.C.C.1:2.5:4:11 (1 cement: 2.5 fly ash:4 course sand: 10 graded 40mm stone aggregate).
5.1.2,Providing and laying reinforced cement concrete of (1cement:1.5 sand:3graded stone aggreagates of 20 mm and down size) using Nowrangpur or approved quality sand, work in foundations up to plinth from any depth below ground level, beams,coloums,walls in vertical or horizontal, landing, pillars,piers,abutments,posts and struts etc. including necessary curing, as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. complete ( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).
5.2.2,Providing and laying reinforced cement concrete of (1cement:1.5 sand:3graded stone aggreagates of 20 mm and down size) using Nowrangpur or approved quality sand, work in superstructure up to floor V level,roofs, slabs, lintels, beams,chajjas, coloums,walls in vertical or horizontal, fins,bressummers,shelves, suspended floors, landing, balconies, pillars,piers,abutments,posts and struts etc.in super structure at all heights including necessary curing, as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. complete( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).
5.9.1,Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillars, posts, struts and stair cases and all types of RCC work at any depth below ground level/up to all heights above ground level in any floor as directed by Engineer-in-Charge. Foundation,footings,bases of columns..
5.9.3,Suspended floors,roofs,landing
5.9.5,Lintel beams,plinth beams,cantilevers..
5.9.6,Columns,pillars, piers
5.22.4,Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C. work at all height and depths, carting the same from store / issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details, including supplying and binding with contractor's own soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused / scrap / unserviceable steel to owner's storage point etc. all completed as per the direction of E-I-C. [REINFORCEMENT STEEL / TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE]
4.17,Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth,etc. all completed as per the instruction of Engg-In-Charge (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
5.3, Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
5.15,Providing, hoisting and fixing upto all floor level pre-cast reinforced cement concrete in lintels, beams, bressummers, jalis,mouldings as in cornices, window sills, posts, struts and shelves etc. including finishing and plastering withcement mortar 1:3(1 cement: 3 fine sand) of thickness not exceeding 6mm on exposed surfaces to give a smooth & even surface,including centring, shuttering, and curing etc. but excluding cost of reinforcement with 1;2:4(1 cement:2 finesand: 4 graded stone aggregate of 20mm & down size) etc. all completed as per the direction of E-I-C. . [CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.]
6.1.2,Providing and laying brick masonry with fly ash bricks in foundation, up to all depth in cement mortar 1:6 ( 1 cement : 6 sand ) using Nawarngapur or approved quality sand with brick class designation 50 including curing and racking out joints,scaffolding etc. all completed as per the direction of E-I-C.( CEMENT WILL BE ISSUED FREE OF COST FROM NALCO'S STORE)
6.4.2,Providing and laying brick masonry with fly ash bricks in super structure up to all hight in cement mortar 1:6 ( 1 cement : 6 sand ) using Nawarngapur or approved quality sand with brick class designation 50 including curing and racking out joints,scaffolding etc. all completed as per the direction of E-I-C.( CEMENT WILL BE ISSUED FREE OF COST FROM NALCO'S STORE)
6.13.2,Providing half brick masonary work in partition walls etc. for any depth below ground level/all heights above ground level, using 50 class designation brick in cement mortar 1:4 (1 cement: 4 sand) including providing and fixing 2 nos. 8mm dia M.S.bars with binding wire at every fourth course in cement mortar,with necessary scaffolding staging, curing, raking out joints etc. all completed as per the direction of E-I-C.(CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
9.95.3,Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer in charge. aluminium butt hinges 100x75x4 mm
9.97.2,Tower bolt 250x10 mm sizes.
9.97.4,Tower bolt 150x10 mm sizes
9.96.1,Sliding door bolts 300mm x16mm sizes.
9.96.2,Sliding door bolts 250mm x16mm sizes.
9.100.1,Handles 125 mm sizes.
11.46.2,Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dados, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.ONLY GREY CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.] .
11.39, Providing and laying rectified Glazed Ceramic floor tiles (Johnson/kajaria/RAK or equivalent) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete as per the direction of Engg-in-Charge.[ ONLY GREY CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.] .
11.41.2,Providing and laying vitrified floor tiles/ antiskid vitrified floor tiles(Johnson/kajaria/RAK or equivalent) in 600x600mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.as per the direction of Engg-in-Charge.[ ONLY GREY CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.] .
13.16.1,Providing and laying 6 mm cement plaster in cement mortar 1:3 (1 cement: 3 sand) with Nawarangapur or approved quality sand on concrete/masonry surfaces including cleaning , hacking concrete surfaces, scaffolding , providing drip mould if required, watering, curing etc. complete for all heights etc. all completed as per the direction of E-I-C.. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
13.1.2,Providing and laying 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) using approved sand or including applying water to surface before plastering,scaffolding,curing up to 7 days etc. all complete for all height/depth etc. all completed as per the direction of E-I-C.. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
13.2.2,Providing and laying 15mm thick cement plaster(using Nowrangpur or approved quality sand) in cement mortar 1:6 (1cement:6 sand) on the rough sides of single or half brick wall or masonary work using approved type of sand including applying water to surface before plastering,scaffolding including curiing up to 7 days etc., all complete for all height etc. all completed as per the direction of E-I-C.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE )
13.26,Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engg-In-Charge.
13.42.1,Distempering with 1st quality acrylic washable distemper( ready mixed ) of approved make, after applying one coat of cement primer on walls and ceiling etc. of approved brand and manufacture on new work with approved shade to give an even shade complete up to the satisfaction of Engineer in charge, as per manufacture's specification,including scaffolding,all complete. Area must be cleaned off spilled paints etc. after completion of painting works.
13.46.1,Providing and applying arcylic paint New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm), to give an even shade after removing the foreign particle with wire brush etc. ( where ever required) on new work specified at all heights including all labour , tools , tackles scaffolding , consumables and materials required for the work and as directed by the Engineer-in-charge.
13.61.1,Painting two or more coats with synthetic enamel paint of approved brand and manufacturers in all shades on all types of surface like steel / wood / concrete / plaster / for letterings etc. all complete up to the satisfaction of Engineer-in-charge ,including the cost of all materials,scaffoldings, tools, tackles and labours.
17.2.1, Providing and fixing white vitreous china pedestal type water closet with ISI marked (Parryware/jaguar/cera/hindware/kohler/RAK or equivalent) (European type W.C. pan) with white seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. all complete as per the direction of Engg-in-Charge.
17.23,Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm size respectively (Parryware/jaguar/cera/ hindware/kohler/RAK or equivalent) with longitudinal flush pipe, unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required etc all complete as per the direction of Engg-In-Charge:
17.7.9,Providing & fixing white vitreous china Surgeon type wash basin (round /oval shape) of size 660x460 mm with C.I. brackets painted in white, with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked (Parryware/jaguar/cera/hindware/kohler/RAK or equivalent) ,32 mm C.P. brass waste of standard pattern,C.P.brass chain with rubber plug, 32mm dia meter CP brass trap & unions complete ,including cutting & making good the walls wherever required etc. all completed as per the direction of Engg-In-Charge.
17.29,Providing & fixing of ( Size 100mm x 100mm) sand cast iron gratings for gully , Nahni trap including all materials and labours etc. all completed as per the direction of E-I-C.
17.32.1,Providing and fixing Circular shape 450 mm dia mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. all completed as per the direction of Engg-In-Charge.
17.33,Providing and fixing 600 x 120 mm glass shelf edges rounded off supported on anodised aluminium angles frame with C.P brass brackets and guard rail complete fixed to wooden cleats with C.P. brass screws and washers etc. all completed as per the direction of E-I-C.
12.41.1, Providing and fixing on wall face unplasticised Rigid PVC pipes for waste water drainage conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(Single socketed pipes.)etc. all completed as per the direction of E-I-C. 75 mm diameter
12.41.2, 110 mm diameter
12.42.1.1, Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes for waste water drainage ,conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of E-I-C.. Coupler 75mm dia
12.42.1.2, Coupler 110mm dia
12.42.3.1, Single tee with door -75x75x75
12.42.3.2, Single tee with door -100x100x100
12.42.4.1, Single tee without door -75x75x75
12.42.4.2, Single tee without door -100x100x100
12.42.5.1, Bend 87.5° 75mm dia
12.42.5.2, Bend 87.5° 110mm dia
19.6.2,Supplying ,laying of sewerage line with 150 mm dia.R.C.C. Hume pipe with stiff mixture of cement mortar 1:1 (1 cement: 1 fine sand) after cleaning the pipes matching the slopes including testing of pipes, packing of gaskets inside the collar, all matertials ,labour, tools, tackles etc. complete as per the direction of Engineer-in-Charge. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
18.17.1,Providing and fixing gun metal gate valve with C.I. wheel of approved make( screwed end ).etc. all completed as per the direction of E-I-C. 25 mm nominal bore
18.17.2,32 mm niminal bore
18.54.2,Supplying ,fixing of 15 mm nominal bore, 122mm long, weighing not lessthan 99 gms PTMT Bib cock / Stop cock of approved make & design etc. all completed as per the direction of E-I-C.
18.53.1, Providing and fixing C.P.15 mm nominal bore brass angle valve for points of approved quality conforming to IS:8931 etc. all completed as per the direction of E-I-C.
17.71, Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. etc. all completed as per the direction of E-I-C.
17.69.2 ,Providing and fixing PTMT Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms etc. all completed as per the direction of E-I-C.
18.12.2,Providing & laying G.I. pipes of approved make complete with GI fittings like tees,reducers,sockets,bends,elbows & clamps(except GI unions which will be paid sepearately) including trenching ,refilling,cutting, testing of joints & making good the walls etc. all complete as per direction of Engg-in charge (for external works for the following diameter pipes.) 20 mm dia nominal bore (medium grade)
18.12.3,25mm dia nominal bore (Medium grade)
18.9.2, Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. (for external works for the following diameter pipes.) 20 mm nominal outer dia Pipes
18.9.3, 25 mm nominal outer dia Pipes
18.8.1,Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases in walls and making good the same including testing of joints complete as per direction of Engineer in Charge.(For internal works) 15 mm nominal bore (Medium grade)
18.8.2,20 mm dia nominal bore (medium grade)
18.46.1,Providing & fixing GI fittings of approved make including all materials, labours,tools & tackles as per direction of Engineer-in- Charge. GI union 15 mm dia size.
18.46.2,GI union 20 mm dia size.
18.46.3,GI union 25 mm dia size.
18.48,Providing and fixing of Polyethylene water storage tanks ( 4 nos.of 500 litre capacity) of approved make with all fitting,cover and suitable locking arrangement including inlet, outlet,over flow, and scource arrangements and puting the tanks in different elevation/floor as per requirement including all materials, tools & tackles, all labours etc. all complete as per the direction of Engineer in charge.
13.18,Providing and laying neat cement punning over the platsered/ concrete surfaces at the rate of 2.2 Kg. of cement for one square metre including curing etc. all completed as per the direction of E-I-C [CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.]
19.21.1,Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. all completed as per the instruction of Engg-In-Charge.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) For pipes 100 to 250 mm diameter.
22.14.1,Providing and laying grading concrete with (1 cement:2 corse sand:4 graded stone aggrgates of 20 mm and down size) on roof with required thickness as directed by Engineer in charge, finished with 6mm thick cement plaster 1:3: and neat cement punning,including cleaning the surface,curing up to 15 days,at all hight/any floor,etc complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
18.62.1,Providing and fixing 15 mm nominal bore, PTMT Ball cock, 105 mm long, weighing not less than 138 gms,of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball etc. all completed as per the direction of E-I-C.
15.3,Dismantling R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
9.119,Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.
9.118.3, 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places etc. all complete as per the direction of Engg-in-Charge.
15.7.4,Dismantling of brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
15.9.2,Dismantling stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
18.63,Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms etc. all complete as per the direction of Engineer In Charge.
9.21.2,Providing & fixing ISI marked flush door shutters conforming to IS:2202(Part-1) non-decoretive type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, all complete as per the direction of Engineer in charge.
9.1.2,Providing,fabricating, & fixing seasoned sal woodworks in frames/ shutters of doors, windows, clerestory windows, false ceiling work and other frames, wrought framed and fixed in position including transportation from workshop to siteetc. all complete as per the direction of Engineer-in-Charge.
9.53,Supplying,Providing and fixing of 40 x 5 mm flat iron hold fast 400 mm long including fixing to wooden frame with 10mm dia bolts,nuts and embedding in cement concrete block 300x100x150 mm with (1cement:3corse sand:6 stone aggregates of 20 mm & down size) mix concrete as per the direction of Engineer-in-charge. (CEMENT WILL BE ISSUED FREE OF COST FROM NALCO'S STORE)
9.48.1,Providing,fabricating, making, transporting to site and erecting of ornamental structural steel work like gates, doors, windows, grills,ventilators,trusses, in built up sections by welded/bolted/riverted, M.S. bars, tees, angles, flats, chanels, C.Q.plates, pipes, round bar,square pipes,hollow sections etc. as per specification and direction of engineer-in-charge along with approved steel fittings and painting with one coat of red oxide primer etc.all complete for all heights and depths . (STRUCTURAL STEEL/ALL MATERIALS WILL BE PROCURED BY THE AGENCY).
10.28,Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
21.1.2.2,Providing and fixing aluminium work for doors, windows, ventilators /frame and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws,roller etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid in respective items separately) : For shutters and frames of doors, windows & ventilators including providing and fixing hinges/pivots/rollers with Powder coated aluminium (minimum thickness of powder coating 50 micron) and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings & glazings shall be paid in respective items separately)
21.3.2, Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in respective items): With float glass panes of 5.50 mm thickness
26.7,Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium etc all complete at all height as per the direction of Engineer In Charge.
12.50,Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.( All the required materials shall be procured by contractor)
10.25.2, Providing,fabrication and errectiion of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position (structural gate/truss/purlin ) and applying two or more coat of synthetic enamel paint of approved shade over an under coat of approved steel primer after proper cleaning as required.etc. all completed as per the direction of Engg-In-Charge.(All Structural materials will be procured by Contractor) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.87,Painting, two or more coats with acrylic spray paint, of approved brand and manufacture, (PIONEER or equivalent) by spraying, to present an even surface, over one coat of metal primer of automative quality, (ESDEE or equivalent) over two coats of metal putty of ESDEE or equivalent make, properly smoothened to give an even finish, applying additional coats wherever required to achieve even shade and colour as directed by Engineer-In-Charge.
11.01,Providing & fixing of letters of any language of approved patterns made with stainless steel (Grade-304) including base plate at back side,matching to the size of letter,over vertical masonry etc.all complete as per the direction of Engg-In-Charge.
24.1.1,Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia
12.41.1, Providing and fixing on wall face unplasticised Rigid PVC pipes for waste water drainage conforming to IS : 4985 Type I, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(Single socketed pipes.)etc. all completed as per the direction of E-I-C. 75 mm diameter
12.41.2, 110 mm diameter
24.3.3,Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia with or without 2mm width slots for recharge pit.
24.4.3,Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
24.5,Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 25 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
24.6,Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
24.7,Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
NRUSINGH CHARAN BEURA
PADMANAV NAYAK
NSPP INDIA PRIVATE LIMITED
M/S RAHUL CONSTRUCTION
MS/ BABA BISWANATH CONSTRUCTION
M/S M H ZAMAN
M/s. OM PROVISIONS
NILANCHAL NAHAK
S.C. DASH
S.V.ENGINEERING
M/s P.K.RAY
BEBARTA BISOI
M/S SADASHIV ENTERPRISES
S K ENGINEERING WORKS
M/S PALEI CONSTRUCTION
stage.html
html • 0.08 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_842345.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .