COMPREHENSIVE B/R MAINT OF GUN HOUSE, COLABA HOUSE, MG MED, AF HOUSE AND VIP BANGALOWS OF AGE B/R(W) UNDER GE (WEST) COLABA MUMBAI.

Amount

Dismantling of brick work or stone/boulder masonry built in cement mortar all as specified and directed.

M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

M&L brickwork except bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

Taking down cement plaster of any description on brick or stone walls including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land upto 04 storeys buildings all as specified and directed.

M&L 15-25 mm (average) thickness Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

M&L 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth witjhout using extra cement all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

M&L rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished surfaces even and smooth without using extra cement all as specifeid and directed.

M&L for preparing new plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including use of scaffoldings all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of birla putty (average 2 mm thick) all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distimper over a coat of birla putty (average 2 mm thick) all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white washing including preparation of surfaces all as specified and directed

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scaffoldings of any height all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coats of Plastic emulsion paint over a coat of birla putty (average 2 mm thick) all as specified and directed

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, zinc chrome primer all as specified and directed.

Complete removal of old existing polish of doors/windows by using blow lamp or by grinder and applying french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats of best quality all as specified and directed

S&F in repairs decorative beading of 1st class hardwood of any size, use for fixing of glass panes of doors and windows all as specified and directed.

Providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 literes per linear metre including drilling and plugging holes etc in apron all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots complete including all necessary scafolding arrangments upto any height all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.

S&F in repairs curtain rod (decorative type) 20 mm dia of SS as approved by Engr-in-charge all as specified and directed. Note : The rate include for any colour and any design

S&F in repairs curtain brackets decorative type (antique) for receiving single/double curtain rod, fixing for 20 mm rod all as specified and directed.

S&F in repairs curtain rod (decorative type) 20 mm dia of brass as approved by Engr-in-charge all as specified and directed. Note : The rate include for any colour and any design

S&F curtain brackets decorative type (antique) of brass, for receiving single/double curtain rod, fixing for 20 mm rod all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern spring including roller plate all as specified and directed.

M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel painting all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid all as specified and directed.

M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works all as specified and directed.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar of any height including scafolding all as specified and directed.

Dismantling roof battens of any description and in any position all as specified and directed.

M&L second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scaffoldings of any height all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres, sectional area exc 15 & n exc 25 Sqcm including scafoldings of any height all as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height all as specified and directed.

Fixing only roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed.

S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including hacking out old broken glass panes from wooden frames all as specified and directed.

S&F in repairs plain, galvanised mild steel sheeting in valley gutters of thickness 0.63mm, straight flashing (length and girth as fixed ) all as specified and directed

S&F in repairs POP false ceiling consisting of frame work made with 50 mm Sq MS tube of 18 G thickness as main runners at 600 mm c/c both ways suspended/supported with MS flats 25x4 from existing RCC slab including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thick welded to main runners and applying POP (calcium silicate semihydrate variety) to the expended metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chrome primer over the MS frame work and suspended all as specified and directed

M&L in repairs Italian marble pre polished (of any type and colour) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding of front and sides of edges laid in floors/Jambs of window and all other similar works in approved design over 20 mm thick screed bed/plaster in cement mortar 1:4 all as specified and directed.

S&F in repairs tile trim of Stainless steel 304 grade of thickness 1.50 - 2.0 mm of brass, 25mm width any colour as approved by GE all as specified and directed by Engineer-in-Charge.

M&L for heavy duty external floor tiles of 15-16 mm thick of size 600x600 mm of matt finish set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.64 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L 25 mm thick 2nd class hardwood planed one side & edges tongued and grooved or rebated and fixed with nails as in wall panelling all as specified and directed.

M&L for clean sawn timber framed and fixed second class hard wood scantlings as in frame work to wall panelling all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats french polishing all as specified and directed.

S&F in repairs MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other overing, running rails and guides) and hanging; also fastening and fixing including dismantling/ taking down old existing all as specified and directed.

S&F in repairs cast iron arrow, tee, bends and designs of varoius pattern as per requirement of site for gates, rails, braces, etc. drilled for fixing of hooks and hinges or steel hanging door fittings also fastening, welding and fixing complete including dismantling/ taking down old existing complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) all as specified and as directed.

M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, including moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6) all as specified and directed.

S&F in repairs sink without drainage board made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 535mmx455mmx 203mm glossy finish all as specified and directed.

S&F in repair Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing or removed to store all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Taking down shutters of any description nexc 1.00 sqm each all as specified and directed.

S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE .

S&F 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards /shelfs fixing with 1st class hard wood lipping/beading all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE.

S&F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed by Engg-in-charge.

S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and of any shape all as specified and directed.

S&F in repairs stainless steel modular thali-plate basket SS 304, of size 520x485x200mm, heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs stainless steel modular perforated cutlery basket SS 304 of size 52 x 48.5 x 10 cm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer channel all as specified and directed.

S&F in repairs stainless steel triple cutlery inserts having length 500mm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs stainless steel grain trolley SS 304 of size 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity 25 kg all as specified and directed.

S&F in repairs stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs 125 mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed.

S&F 300 mm long brass, sliding door bolts with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and directed.

S&F in repairs 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 all as specified and directed.

S&F in repairs 250 mm long brass handles, cast type, all as specified and as directed.

S&F in repairs 75 mm Mortice lock, vertical type, of brass of 4 lever all as specified and as directed.

S&F in repairs brass drawer handles, projection drop (50mm to 65mm) on screwed plate all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass all as specified and as directed.

S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F Brass knobs 35-40mm dia all as specified and directed.

S&F 140 mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F in repairs wash hand basin table top of size 565x425x140 vitrous China including, waste coupling & PVC waste pipe of 32 mm dia all as specified and directed.

S&F stainless steel Double Coat Hook of suitable colour all as specified and directed.

S&F urinals flat back with integrated EFS of size 360x330x740mm in snow white including each and all acessories and also with 4x1.5V AA Duracell batteries and fitted to 15 to 20 mm dia GI pipe all as specified and directed.

S&F in repairs stainless Steel 304 Grade Dual Folding Towel Rack for Bathroom/Towel Stand/Hanger/Bathroom Accessories (24 Inch-Chrome) all as specified and directed.

M&L HDF laminated wooden tiles flooring of size 1215mm x196mm x 8.3mm thick medium emboss anti bacterial and moisture resistant laid over and including foam sheet all as per manufacturers instructions all as specified and directed.

S&F 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work or any frame all as specified and as directed.

M&L 6 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work or any frame all as specified and as directed by Engr-in-Charge.

S&F 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and directed.

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm dia of outlet all as specified.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm dia of outlet all as specified and directed.

S&F wall mixer 3 -in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand and overhead shower) all as specified and directed.

S&F in brass chromium plated towel rack with 3 hooks 18" (Oval Range) all as specified and directed.

S&F chromium plated towel rings fixed with screws all as specified and directed.

S&F corner glass shelf 200 mm (brass brackets) all as specified and directed.

S&F in repairs brass chromium plated shower rose 300 mm of size with arm and with or without swivel joints to steel pipe or union all as specified and as directed.

S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold all as specified and directed.

S&F wash hand basin table top of size 460x345x130 mm vitrous China including, waste coupling & PVC waste pipe 32 mm dia all as specified and directed.

S&F in repairs 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass all as specified and directed.

S&F Brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin all as specified and directed.

S&F mirror cabinet PTMT of size 400mm x 500 mm with megnetic locking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs all as specified and directed.

M&L single piece WC with PP thin rim seat cover white, fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings all as specified and directed.

M&L in repairs one piece closet with bowl for coupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x680x765mm, strap 220 mm cistern with cistren fittings for 755SS, 755SN and necessary fittings all as specified and directed.

S&F stainless steel peg set of suitable size of length all as specified and directed.

S&F toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified and directed.

S&F chromium plated, cast copper alloy jet spray with 1 mtr SS chrome plated hose and hook (for European seat) all as specified and directed.

M&L 20 mm dia fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F GI tubing 20 mm bore medium grade galvanised with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm all as specified and directed.

S&F GI tubing 25 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm all as specified and directed.

S&F 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore (Min Wt 20mm- 210 gms) all as specified and directed.

S&F PVC Tank nipple 20 mm suitable for HDPE water tank min wt 15mm-38gm/20mm-45gm

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, and cutting chases for concealed water tubing or concealed conduit wiring, and making good, cutting not exc 10 cm girth all as specified and directed.

Demolition and breaking up drain pipes 75/100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar upto any height including all scafloding arrangments complete all as specified and directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto any height including all scafloding arrangments all as specified and directed.

S&F 110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof all as specified and directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC (SWR) bends suitable for 110 mm external dia all as specified and directed.

S&F PVC (SWR) bends suitable for 75 mm external dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm dia all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore all as specified and directed.

S&F 110 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured) all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 2000 ltrs hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

S&F in repairs 12mm thick, toughened glass clear or frosted for door shutters, partitions, shelves including fitting and fixtures such as glass handles, SS studs, fittings for door pivots all as specified and directed.

M&L Stainless Steel grade 316 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequred) & SS plates cutting to desired shape, 1D Finish etc. including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing, fixing with necessary nut bolts and fixtures and filling the holes with mircro concrete all as specified and directed.

S&F Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises outside of MD land all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x600x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry & pointed in coloured cement to match the shades of the tiles including rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L Screed bed or bedding layer of mortar 15mm thick in CM (1:4) for laying floor tiles all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm, in floors/vertical etc. in any dark/light shade/double charged/ultracharged set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L Hi-Gloss digital ceramic tiles in vertical surface of size 600mm x 1200mmx 8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) up to any height including use of scaffoldings all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply two coats of distemper oil emulsion on walls over 2mm thick putty and one coat of primer by an authorised applicator all as specified and directed.

S&F tumbler holder -Gold bright PVD all as specified and as directed .

S&F in repairs SS 202 stain finish Handle D type 25 mm dia 600 mm long for glass shutter all as specified and directed.

Taking down Chowkhats or frames area exc 1.50 sqm but n exc 4.00 sqm each all as specified and directed..

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for styles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming styles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 all as specified and directed.

S&F in repairs 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed.

S&F in repairs 75 mm butt hinges medium weight cold rolled stainless steel all as specified and directed

S&F in repair aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F in repairs aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed.

S&F in repairs aluminium handle 150 mm cast type anodised all as specified and directed

S&F aluminium handle 150 mm cast type anodised all as specified and directed

S&F in repairs aluminium handle 75 mm cast type anodised all as specified and directed

S&F aluminium handle 75 mm cast type anodised all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm as per Manufacturers specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications complete all as specified and directed (DR Fixit Roofseal ultra or equivalent).

S&F in repairs 3 fold vanishing blinds having cylindrical top of 2 mm thickness, aluminium pelmet, Zebra manual operation set, aluminium bottom powder coated with end caps & clamps of any size & of any colour all as specified and directed.

M&L for complete removal of existing surfaces and application of Dr. Fixit Dampguard Classic by applying and following the steps (i) SURFACE PREPARATION - Clean the surfaces thoroughly, it should be free from oil, grease, dust, dirt, fungus and moss. } Thorough wire brushing followed by sanding with emery paper is recommended. (ii) Remove the existing paint, neroo or instant lime, etc. while treating internal damp walls. Stir the Base and Hardener thoroughly in their individual packs to achieve the uniform consistency. } Pour the Base part in appropriate container followed by the Hardener part and mix them thoroughly to a homogeneous smooth paste. (iii) Dilute the mixed compound with water (In ratio of 1 part Base: 1 part Hardener: 1 part water) by slow addition and mix it thoroughly to get a brushable consistency Fill the cracks & grooves with Dr. Fixit Dampguard Classic and cement modified putty & allow it to dry for at least 24 hours. Dr. Fixit Dampguard Classic D A M P - P R O O F C O AT I N G F O R I N T E R N A L W A L L S A N D R C C , WATER TANKS.

M&L for cleaning of roof surfaces/chajja and other surfaces, making surfaces good and also filling the crack with crack filling and applying evenly two bitumen primer coat all as specified and as directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application all as specified and directed.

M&L for plastering 15-20 mm thick (Average) epoxy based Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and as directed by Engr-in-Charge.

S&F Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding columns/beam/ slab to hold cladding etc. and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour all as specified and directed.

S&F powder coated aluminium frame of any colour (minimum thickness of powder coating 50 micron) for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws all as specified and directed.

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

Demolition of cement concrete ground floor and paving nexc 15 cm thickness below or above ground level all as specified & directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) 50 mm thick all as specified and as directed.

ASHOK CONSTRUCTION

HINDUSTAN BUILDERS

SHRI SAI ENTERPRISES

Sachin santosh dalvi

Bidder Name

HINDUSTAN BUILDERS

RAMESH ENTERPRISES

ASHOK CONSTRUCTION

SHRI SAI ENTERPRISES

Sachin santosh dalvi